Hi Aqib. We created this video with one of our custom built Live Schematic simulations. We've got over 190 simulations like it, and you can interact with them on our website. Here's a direct link to our session on Directional Control Valves, so you can see all the resources we have on that topic: www.lunchboxsessions.com/explore/hydraulics/flow-directional-control-valves
I like how clear and slow you explain this material to the viewers. It definitely an effective way to enable us in order to understand the video clearly. Good Work.
Oh super. Glad you got it figured out. If you had some dirt or grit in the valve, and you can figure out how it is getting into the system, then you could prevent it from happening again. Typical points of entry include filling procedure (dirty pail and funnel), low quality tank breather (it's worth it to get a high quality one with a desiccant for moisture control as well) and scored/scratched cylinder rods among others. - Carl On www.fluidpowerworld.com we did a two part webinar last fall that you can still download and watch re: contamination. www.fluidpowerworld.com/webinar-dealing-contamination-sources-hydraulics-part-1/ www.fluidpowerworld.com/webinar-dealing-contamination-sources-hydraulics-part-2/
When trouble shooting electric over hydraulic, always pull the coil off the valve stem and verify its clean in between coil and valve stem, and that stem is not slightly bent. Both can be a real showstopper, and turn up in equipment regularly.
Thank you, very interactive explanation, i've a recently changed 2 solenoid valves, because even if not energized, it keeps holding the pressure, and find it to hot, testing the ohm of the coil find it as the datasheet..any thoughts about ?
What would it indicate if you pushed both manual overrides and they both stayed pushed in? I have that problem on a autocrane crane. Will not scope in or out. Thanks. Your video is very clear to understand. I never knew how they worked but I get it now. Thanks again
Thanks, haha. One of our programmers made that music. We've stopped using it in our newer videos, because we bought a better microphone and don't need the background music to "hide" how awful our sound quality used to be.
hellow,please tell me if you know.I have a kafee maschine and during make a capucinno explosed e high pressure hose( this one who get in the solenoid valve ) i changed the hose and for a short time came pressure 3 sec and after this exploded again my ask is what can be broken ? solenoid valve or i have problems with hight pressure boiler? the watter ist warm...THanks Răspunde
WHEN I OPENED A SOLENOID VALVE, I HAVE OBSERVED THAT THERE ARE SMALL GROOVES ON THE PISTON PART OF SPOOL. WHAT IS THE USE OF THOSE GROOVES? WHAT IS THE TYPE OF FIT USED IN SOLENOID VALVE BORE ID AND SPOOL OD?
Hi, Can a faulty Pressure Control Valve, of a diesel car's fuel injection pump, cause hard starts in the mornings ? You see, I've checked almost everything else (battery, starter, glow plugs, EGR, MAF, etc., etc.) and all working well. The hard starts only happens in the morning, I dont get hard starts throughout the day, not in between trips, not even between short trips. Hope you can help. Thanks in advance !
We make them from scratch. Our animators draw the graphics in a vector drawing program (like Adobe Flash or Adobe Illustrator), and then write the the software code (JavaScript) that powers the simulation. The simulations run right in your web browser.
how its operated in one solenoid with two functions?means one directional valve have four function like outrigger beam cy,extend and retract,and other outrigger jack cyl.extend and retract.pls described
yusuf sayyed it sounds to me like you are describing a circuit that also has a sequence valve (no additional solenoids). Either that or it is simply a matter of two cylinders in parallel and the one that is easiest to move (lower pressure) goes first.
Can these solenoid valves be actuated in such a way to feather the hydraulic flow by using a rheostat or are they only able to be operated fully open or fully closed?
Hello, I have a jeep 2004 with hydraulic fan motor, with solenoide Valve to control speed. Seems the solenoid is not working. Can it be serviced, there are no replacements available. Or how do I try it, to discard a malfunction SOS please
when spool is in null postion, should we get oil in A and B, we have tested on Directional valve, we inserted 150 barg on P and we are gettingoil drop on Port A and B, is this normal in Null Postion without any command to Solonoide valve
In a hydraulic directional solenoid valve symbol, if there is a colored triangle symbol next to solenoid symbol then such valves are called as Hydraulic Pilot operated solenoid valves. But my doubt is how does a solenoid valve operate on Pilot pressure, it operates only when we give electrical signal to the solenoids. Kindly help me to understand this.
I’m having trouble where the valve will work in one direction not not the other and even pressing the manual pin still will not make it work in the other direction
My skid steer has one solenoid not working I switched the wiring and the wiring and the swapped sides on the solenoids (they are interchangeable) problem is definitely in solenoid do they ever stick and just need tapped to start working ot seems to be a sealed unit the replacement is $305
The solenoid itself is only a coil of wire - no moving parts. It can be checked with an ohm meter. If you mean that the entire solenoid valve is sticking, and only works when you tap on it, then there may be some contaminants that are causing the valve to jam. A new valve may solve the problem but only temporarily if the contaminants are still present inside the system/fluid.
Raven4122 I've done hydraulic work on heavy equipment and the dusty conditions were the root cause. Change hydraulic filters often! The systems are very sensitive to dirt. It's not something that can you can see. The oil may look clean and still be contaminated. Jim.
Thanks for the advice jim I will take your advice and yes The new solenoid fixed my issue I will be doing a short video since I have found none.. Thanks again..
We don't use any program - we make the simulations all by ourselves. You can read more about them here on our company site: www.cdiginc.com/live-schematics
I'm glad you like them! Our team of artists/animators/programmers draw the graphics in a vector drawing program (like Adobe Flash or Adobe Illustrator), and then write the the code (JavaScript) that drives the simulation. The simulations run right in a web browser, like any web page. Thanks for pointing out the broken link - I've edited the comment and fixed the link.
I have a problem with a genie s40. Won’t steer because pressure won’t bleed off the opposite side of cylinder pressure is applied to. It has a similar type of valve, only solenoids are stacked rather than opposing. No one can figure out my problem. Steering valve and solenoids are new.
Hi Peter. Thanks for registering. LunchBox Sessions will be open to the public soon. We'll email you when the time comes. Until then, enjoy the CZcams videos, and let us know what topics you'd like to see covered.
There is a problum in my amt car when I put in D position car runs in 1gear 2 gear 3gear slips while accelatter suddenly check light comes on deshbord car will become slow car will not run then have to switch of car after one minute start the car check light not there put in D mode car will run an again same problem can somebody solve this problem
True enough Shaine, a solenoid which causes motion (moves an armature,..a steel slug as it were) contains a coil in order to create the magnetic field. So the coil is only that, a coil of wire. A solenoid on the other hand can push a spool/poppet (inside a pneumatic or hyd valve) , unlatch a doorway, or close electrical contacts (inside a relay). But yes sometimes folks use a term which they learned that does not fully properly describe a device. Thanks for commenting.
How did you create this video and it possble to make it interactive?
Hi Aqib. We created this video with one of our custom built Live Schematic simulations. We've got over 190 simulations like it, and you can interact with them on our website. Here's a direct link to our session on Directional Control Valves, so you can see all the resources we have on that topic: www.lunchboxsessions.com/explore/hydraulics/flow-directional-control-valves
I like how clear and slow you explain this material to the viewers. It definitely an effective way to enable us in order to understand the video clearly. Good Work.
I was beginning to wonder if anyone in the hydraulic world can just be straight forward... Faith restored!! 👍 Thanks
Great video! Very straight-forward and easy to understand.
Just needed a quick refreshment and you delivered it perfectly. Thanks for posting!
its wrong
Perfect , thanks for your amazing explanation :)
Very informative video. Now I realize what mistake I was doing while trying to open a valve. I was bypassing it by keeping the solenoid energized !!
Glad it helped
That's what it was. Cleaned and it's working perfect. Thanks alot
Oh super. Glad you got it figured out. If you had some dirt or grit in the valve, and you can figure out how it is getting into the system, then you could prevent it from happening again. Typical points of entry include filling procedure (dirty pail and funnel), low quality tank breather (it's worth it to get a high quality one with a desiccant for moisture control as well) and scored/scratched cylinder rods among others. - Carl
On www.fluidpowerworld.com we did a two part webinar last fall that you can still download and watch re: contamination.
www.fluidpowerworld.com/webinar-dealing-contamination-sources-hydraulics-part-1/
www.fluidpowerworld.com/webinar-dealing-contamination-sources-hydraulics-part-2/
excellent animated video!
the best material for training, simple as possible.. nothing couldnt be better
its wrong
excellent material & explanation.Thanks
Sumant
When trouble shooting electric over hydraulic, always pull the coil off the valve stem and verify its clean in between coil and valve stem, and that stem is not slightly bent. Both can be a real showstopper, and turn up in equipment regularly.
gracias , desde argentina.
Really good video
awesome explanation i couldnt have understand it any better than you did sir
Wonderful .......Its very Nice video i would like to see more videos from you like that .. Thanks N keep sharing ..
Too much knowledgeable videos dear sir thnx
thank u ,will u plz keep a video on difference between the solenoidal and directional valve exactly and different types of valves and their workings
great explaination
thank you very much
Great video 👍 Thanks for posting
NICE, WELL DONE
Thanks for posting this. I wii be very useful for training the apprentices of my trade at the plant that I work at.
We’re glad that you found the video helpful.
Gracias desde PERU
Thank you :)
good presentation .
Perfect , thank you
Thank you, very interactive explanation, i've a recently changed 2 solenoid valves, because even if not energized, it keeps holding the pressure, and find it to hot, testing the ohm of the coil find it as the datasheet..any thoughts about ?
very simple thank for explanations
never too old to learn!! so, the de-energised valve returns until spring force?
You guys are best in making simulation, can you post a video on yuken's MRP 01 reducing moduler valve.
Hindi speech
What would it indicate if you pushed both manual overrides and they both stayed pushed in? I have that problem on a autocrane crane. Will not scope in or out. Thanks. Your video is very clear to understand. I never knew how they worked but I get it now. Thanks again
Can you tell us what model of valve you have? It sounds as though your main valve spool is stuck (contaminants).
Parfect...thanks for explanation
Thanks a lot
hello sir the hydraulic videos are too good thank you. How good is to use snubber in the hydraulic system?
Epic fucking music in the background. I felt like an epic space battle was about to happen during this great educational video!
Thanks, haha. One of our programmers made that music. We've stopped using it in our newer videos, because we bought a better microphone and don't need the background music to "hide" how awful our sound quality used to be.
Well done 👍
Very good well explained
Great explanation , thanks for making this helpful vedio. 😊😊😊👍👍👍
Thanks bro. How to work manifold
nice good tutorial
excellent explanation Could you control the output of the solenoids with a pwm signal?
its wrong
Thank you sir
hellow,please tell me if you know.I have a kafee maschine and during make a capucinno explosed e high pressure hose( this one who get in the solenoid valve ) i changed the hose and for a short time came pressure 3 sec and after this exploded again my ask is what can be broken ? solenoid valve or i have problems with hight pressure boiler? the watter ist warm...THanks
Răspunde
Hello, could you tell me why 4/2 way valves stopped being produced and replaced with 5/2 valves?
Superb video 👌
WHEN I OPENED A SOLENOID VALVE, I HAVE OBSERVED THAT THERE ARE SMALL GROOVES ON THE PISTON PART OF SPOOL.
WHAT IS THE USE OF THOSE GROOVES?
WHAT IS THE TYPE OF FIT USED IN SOLENOID VALVE BORE ID AND SPOOL OD?
good video
Very helpful thanku sir
thank yiu
thank you for an amazing video. can you tell me what is the simulation software?
See here: www.lunchboxsessions.com/help/what-software-do-you-use-to-make-the-simulations
Little tip, If the override valve does not work, make sure the main nut is tight
What other issues would cause a valve not to be able to be manually override?
@@gregpartain4307 they get rusty and seize up
Sir which solenoid valve is best for water wall graphics
Hi, your videos are very good, but do you have any video with proportional valves?
Thanks Marcelo. Stay tuned, we will make videos on proportional valves at some point.
its wrong information
Great , i like it
W done
Good video but please drop the background music!
How would I test a solenoid on this type of valve? Asking for a friend😉
Ex
thanks for this vedio very will explain
What could the issue be if neither sides of the manual override works?
Waw excellent video
where this valve mostly used in
Hi,
Can a faulty Pressure Control Valve, of a diesel car's fuel injection pump, cause hard starts in the mornings ? You see, I've checked almost everything else (battery, starter, glow plugs, EGR, MAF, etc., etc.) and all working well.
The hard starts only happens in the morning, I dont get hard starts throughout the day, not in between trips, not even between short trips.
Hope you can help.
Thanks in advance !
Usually they just quit in my experience. Do a compression check.
Heyy boss if it's possible you upload video how vaccum generated valve working. Thanks
hi Carl, nice video, in which program you did the simulation??
Santiago Diaz Ortiz it is in the description
We make them from scratch. Our animators draw the graphics in a vector drawing program (like Adobe Flash or Adobe Illustrator), and then write the the software code (JavaScript) that powers the simulation. The simulations run right in your web browser.
how its operated in one solenoid with two functions?means one directional valve have four function like outrigger beam cy,extend and retract,and other outrigger jack cyl.extend and retract.pls described
yusuf sayyed it sounds to me like you are describing a circuit that also has a sequence valve (no additional solenoids). Either that or it is simply a matter of two cylinders in parallel and the one that is easiest to move (lower pressure) goes first.
THANKS
Can these solenoid valves be actuated in such a way to feather the hydraulic flow by using a rheostat or are they only able to be operated fully open or fully closed?
saya punya masalah di selenoidt palep bagian peed motor SANDVIK COMANDO DC 300. TIDA BERPUNGSI SEBELAH
Hello, I have a jeep 2004 with hydraulic fan motor, with solenoide Valve to control speed.
Seems the solenoid is not working.
Can it be serviced, there are no replacements available.
Or how do I try it, to discard a malfunction
SOS please
when spool is in null postion, should we get oil in A and B, we have tested on Directional valve, we inserted 150 barg on P and we are gettingoil drop on Port A and B, is this normal in Null Postion without any command to Solonoide valve
In a hydraulic directional solenoid valve symbol, if there is a colored triangle symbol next to solenoid symbol then such valves are called as Hydraulic Pilot operated solenoid valves. But my doubt is how does a solenoid valve operate on Pilot pressure, it operates only when we give electrical signal to the solenoids. Kindly help me to understand this.
I’m having trouble where the valve will work in one direction not not the other and even pressing the manual pin still will not make it work in the other direction
My skid steer has one solenoid not working I switched the wiring and the wiring and the swapped sides on the solenoids (they are interchangeable) problem is definitely in solenoid do they ever stick and just need tapped to start working ot seems to be a sealed unit the replacement is $305
The solenoid itself is only a coil of wire - no moving parts. It can be checked with an ohm meter. If you mean that the entire solenoid valve is sticking, and only works when you tap on it, then there may be some contaminants that are causing the valve to jam. A new valve may solve the problem but only temporarily if the contaminants are still present inside the system/fluid.
I replaced the solenoid and it works as it should thank you. SO im going to see if i can figure what went wrong with the old one..
Raven4122 I've done hydraulic work on heavy equipment and the dusty conditions were the root cause. Change hydraulic filters often! The systems are very sensitive to dirt. It's not something that can you can see. The oil may look clean and still be contaminated. Jim.
Thanks for the advice jim I will take your advice and yes The new solenoid fixed my issue I will be doing a short video since I have found none.. Thanks again..
How about the solenoids symbol can know the direction of push
awesome video thanks
what program do u use by the way
We don't use any program - we make the simulations all by ourselves. You can read more about them here on our company site: www.cdiginc.com/live-schematics
LunchBox Sessions the link doesn't work. what i mean is which program do u use to make these simulations they're realy awesome
I'm glad you like them! Our team of artists/animators/programmers draw the graphics in a vector drawing program (like Adobe Flash or Adobe Illustrator), and then write the the code (JavaScript) that drives the simulation. The simulations run right in a web browser, like any web page.
Thanks for pointing out the broken link - I've edited the comment and fixed the link.
LunchBox Sessions Dude your channel one of the clearest explanation and simulations .Good job well done
how come my co 2 valve doesnt have a pin hole to poke ?
Not all directional valve include a mechanical override feature. It is an option for some models.
in this animation , the oil path from the pump to the tank is not seen in normal position
Я все понимаю продолжайте
just wowww
I have a problem with a genie s40. Won’t steer because pressure won’t bleed off the opposite side of cylinder pressure is applied to. It has a similar type of valve, only solenoids are stacked rather than opposing. No one can figure out my problem. Steering valve and solenoids are new.
What software was this animation made with?
How do I get a log in to your sessions on your web site? I have logged my interest by no reply.
Hi Peter. Thanks for registering. LunchBox Sessions will be open to the public soon. We'll email you when the time comes. Until then, enjoy the CZcams videos, and let us know what topics you'd like to see covered.
❤ممتع
Gostaria que esteja em porquês a tradução
There is a problum in my amt car when I put in D position car runs in 1gear 2 gear 3gear slips while accelatter suddenly check light comes on deshbord car will become slow car will not run then have to switch of car after one minute start the car check light not there put in D mode car will run an again same problem can somebody solve this problem
Great video, just background sound is disturbing.
사랑합니다
Learn from Myanmar.
such a simple valve which spoil easily,bummer
How much?can i get it
great
👌👌
Ow ternyata Ini yang digunakan pada sistem otomatis nya hidroulik pump injectionmolding
Too Thanks
I've heard a solenoid valve called a coil before. I guess they're just talking abut the coil of wire.
True enough Shaine, a solenoid which causes motion (moves an armature,..a steel slug as it were) contains a coil in order to create the magnetic field. So the coil is only that, a coil of wire. A solenoid on the other hand can push a spool/poppet (inside a pneumatic or hyd valve) , unlatch a doorway, or close electrical contacts (inside a relay). But yes sometimes folks use a term which they learned that does not fully properly describe a device. Thanks for commenting.
Sering ganti dan bermasalah bagian ini
What software?
Good
sir more video updated pls
👍