diablo tuner chrysler 300
Vložit
- čas přidán 21. 08. 2021
- #Chrysler 300 300c #Hemi DiabloSport Tune Install Intune I3 Fast ! with #Mopar bro #fred_eazy21
For 2015 & up Chrysler 300c's hit up the below link (Similar procedure)
Jeep PCM Swap: • Jeep Grand Cherokee PC...
What's up Everyone Welcome back to the channel! Installing a DiabloSport tune on a 2011 Chrysler 300c is easy to do but takes a bit of time, so sit back, relax and enjoy the process!
The process took about an hour but I would leave myself 2 hours just in case you need to call into Diablosport for any technical issues.
Ok so Unlocked PCM’s and Security By-pass modules are required for tuning for the 2015 to 2021 DODGE-CHRYSLER and JEEP Vehicles. So we're going to assume that you have swapped your factory PCM with an unlocked one or that you have a mopar between 2005 to 2014. For the 2015 and up Mopars ya'll can Check out our PCM Swap episode Link in the description and in the comments below!
Alright so the Tools of the trade for today are:
Patience
A computer with internet access
and a DiabloSport tuner...Today we will be using a DiabloSport I3!
1) Alright let's get it. First thing to do is to hop onto your computer and head over to diablosport.com/downloads to download and install Update agent 1.0.
2) After that plug in the diablo sport tuner via usb and open the update agent 1.0. The update agent will recognize the tuner and start updating the tuner if there is an update available.
3) Next follow the directions displayed on the diablo sport tuner and on the update agent program. It's going to take some back and forth so be patient.
4) After the update is completed head over to the mopar and plug it into the OB2 port in which the tuner will boot up.
5) Now a disclaimer will pop up, just hit that yes button to get into the main menu.
6) Next Hit that Tune Vehicle tab in which the tuner will ask you to cycle the mopar into the run position but do not start the engine! Next hit that continue button on the tuner.
7) Once the next menu appears on the tuner, hit the Eazy tune tab and choose your desired tune, in the next menu choose it again and hit yes on the disclaimer box.
8) After that, on the next menu hit install tune and on next menu hit modify stock tune and hit yes when asked to use the selected tune.
9) The tuner will ask you if you would like to modify parameters such as tire size and removing the speed limiter. Adjust them as you prefere.
10) Next The tuner will start installing the tune beginning with loading the Original back up. The tuner will ask you to cycle the mopar to the off position and back into the run position several times so be patient and follow the tuners commands as they come.
11) Once the back up tune is loaded, the tuner will again ask you if you would like to install the tune. Hit yes and go through the process again as it will ask you to cycle the mopar to the off position back to the run position several times as it installs the canned tune.
12) Finally once the tuner tells you “Tuning is complete” Unplug the tuner from the OBD2 port and start the Mopar up!
Congratulations you have now installed a canned Diablo Sport Tune on your Mopar! Pretty easy eh?! As mentioned before The process took about an hour but I would leave myself 2 hours just in case you need to call into diablosport for any technical issues.
Diablo Tuning is available for mopars all the way from 2005, as mentioned before 2015 and up mopars require unlocked PCMs for tuning and 2018 and up Mopars require a bypass module along with the unlocked PCMs for tuning.
Alright so Stay tuned for our next episode as we will pull the tune out and send it over to Hemifever for custom tuning!
For more Great Mopar content of me and my Jeep SRT please click below and subscribe!
bit.ly/2Mcz3tR - Auta a dopravní prostředky
PCM Swap and Install Diablo Sport Modified PCM:
czcams.com/video/qsIw4b7IfbI/video.html
thanks for the vod man (nice car btw)
Can the tune disable MDS?
Got a question in Australia we only have 91, 95, and 98 fuel
So if it's only give 91 & 93 what does 1 do cause I only run my on the best 👌
Premium 98
Any help b4 a fork out a fortune would be greatly appreciated 🙏
Hey there! I would run the 93 tune with 95 fuel, the 93 tune is a bit more horsepower and the 95 octane gives your enough room incase u get bad gas that's lower than 95. For example here in Canada the 91 gas can sometimes be 90 or 89 depending om the gas station so I personally run the 91 tune and 93 octane gas and it runs smooth
So far i only have exhaust and cold air intake on my 14 5.7. Is it worth it for mw to use the diablo i3
hey there, I would say so, you would need a tuner to load tunes if you did other work such as upgraded cam, supercharger, long tube headers etc. the i3 is also a engine code reader and clears codes too. It is certainly a pretty handy tool. thnx for watching!
Have 2013 5.7 , do i have to do a pcm swap to use the same tuner?
Hey there! You are good, pcm swap is for the 2015+ mopars, I had a 2014 challenger 5.7 and did not need to swap the pcm
Thank u
so you have to buy the tuner and pay to actually download the tune too?
That’s what I’m saying
No
@@glorobrobinson8728 you only have to pay if you want to tune more than 1 car with that tuner
Do you have to buy the license to use it? 2005 Chrysler 300c.
Hey there, if it's just your vehicle u don't need additional liscence but with the i3 you have the option to buy more
I have a 2011 300c and want to disable the 120mph limiter. Will this do that?
Hey there! There is an option to remove the limiter!
@Chris Swenson I have a 2019 and mine stops at 131 😤
My girls does the same at 120pmh how I change the limiter?
Hey guys, update for mine. Diablo tuned her n now we frequently hit 140+. Topped her out at about 160 1 time but let off
I’ve got my 06 up to 143 before I ran out of road💪🏼
do i need to buy the license for my 2012 300c or it’s plug and play
Hey there, if it's just your vehicle it's plug and play the i3 come with a dtandard liscence, with the i3 you can tune more than 1 vehicle by purchasing more liscences through the tuner pc app. With my i3 I purchased an additional liscence and also tune my Jeep Srt. Thank you for watching!
@@moparbro ok thanks man 💪
Do you recommend the Diablo tuner on a 05 Chrysler 300C w/o PCM swap??
hey there, I don't think you need a pcm swap on an 05, I didn't need one on my 2011 300c but I did need one on my 19 jeep, PCM Swap is for 2015 + so you should be good to go
@@moparbro: Appreciate it, bro.
Which license did you buy for the Chrysler? I’m trying to do the same for my 06 Chrysler hemi 5.7
I love how this comment got a like when I asked a question 🤦♂️ can’t get help anywhere these days lol 😂
Hey there, Ira the chrysler liscence thats shows up on the computer, it may of changed recently so I'll double check the specifics on my end. Thanks for watching!
@@moparbro is it the DCXJ license? And thank you for your help I’ve been searching everywhere for answers
@@dannydever915 Hey there, checked mine, it's DCXJ, I understand where there confusion is, it looks like Holley bought them out and everything's on their website so it's all weird, if you stick to the store thats presented via the update agent on the pc you should be safe
@@moparbro thank you again so much it actually means a lot, saves me a ton of time, money and energy 🙏❤️
Hey man did this help with throttle response
hey there! It slightly did, there's an option in the i3 tune for throttle response and firmer shifts.
Beep boop bee boop
Do u know if this tuner works with a 6.4l??
Hey there! yes it does, I used this tuner on the 300c and my jeep srt 6.4L 392
@@moparbro okay cool I was thinking of buying one but I was very skeptical because all the videos I seen is for a 300c 5.7l but this answers my question I appreciate it.
Is the 300 here wrapped? Looks pretty sick.
hey there! it's Wrapped with Avery purple satin metallic 💜🔥
Can it tune two vehicles?
hey there yep! you just need to buy another liscence for like 100 bucks, I run my jeep srt and 300c on this one intune i3
Can I use this on a 2006 300c ?
yessir, 2015+ hemi you need unlocked computers. thnx for watching!
tune just doesn’t work 😭7 hrs and I run in to the stupidest problems... I wouldn’t recommend buying if ur not Albert Einstein
So its just a plug and play nothing else needed?
hey there, yea nothing else needed, for 2015+ you will need an unlocked PCM and for the 2018+ you may need a bypass module as well
@@moparbro i have a 2018 s how would i go about getting everything i need
@@angelcastro4470 I ordered everything from www.hemifevertuning.com/Dodge-Chrysler-Jeep-Diablo-Tuners-s/108.htm they sell packages that have the PCM, tuner & bypass module, the process will be similar shown In this video czcams.com/video/qsIw4b7IfbI/video.html
@@moparbro can I turn off the safety speed limter using this?
@@user-bj4yf4ez2j Hey there, yea I can turn it off on mine, thnx for watching!