DIY / TUTO : How to make secret compartments in drawer (With an IKEA Malm Nightstand)
Vložit
- čas přidán 23. 05. 2018
- This video shows the steps I took to add a secret / hidden gun compartment to an old nightstand. It's not a full tutorial but it shows enough of the process to give you guys some ideas for your own.
If you make something based off my design, or come up with a design of your own, post it in the comments. I would love to see what you guys have made!
Copyright © 2015 CZcams/AbonenDaw Secret compartment drawer - N° de dépôt 99741Q - Jak na to + styl
Great modification of a small night stand. I love the idea! Thanks for sharing
I like it. Make a different one. Maybe a kitchen cabinet or in a wall type set up. Possibly a window sill.
I really like the ideal you had here. Awesome. Then to create a simple locking mechanism with the draw know position in lock or not position . Awesome. That way it only shows,the second dwar when you want.
I also like the foam ideal. It becomes apart of the dwar when locked securely on the foam, and does not slide back and forth to give itself away.
Suggestion. Next time you may prefer to make sure the 2nd dwar is no higher than needed be to hide the gun. I know, this was most likely hour first try. And, most likely had thought of the same thing after doing the project and some reflection. Though this way, the original dwar will not look as shallow as the face of the dwar will suggest. And, because of making the primary dwar as deep as you can, it helps lower the oddity of one may notice if they pull out the dwar.
You may also want to play with the licking mechanism. See what other ways you make to be able to lock it. The way you have the lock is perfectly well though instead of a quarter turn, you may like one you have a 50/50 turn half open and half lock. Then again there may be other ways as well maybe a latch at the bottom may be a locking mechanism as well. Who knows.
Though in all I so love the ideal you shared here in your video.
Wonderful idea. Great job.
Pretty neat idea - thanks for posting!
Thanks a lot 😊
Ótima ideia. Gostei e vou fazer. Top +
Pocket holes should be angled towards the other side of the piece its screwed to. It should always point to the meat of the wood.
Well done. Nice build.
I build stuff too and I think you got a really good idea here and to anybody who says this video sucks or somebody would figure out there’s a hidden compartment remember this video is not titled “The most hidden drawer gun compartment never find it in a hundred years” lol it’s just an example and is meant to give you an idea.
hey, what type of rails did you use? can u try and link the exact ones thanks :)
Hello, where do you get the 1/4 turn pull? Is it OEM or something you rigged up? Thanks!
انا مش عارف اشكرك ازاي انا بقالي فتره جامده بدور علي الدرجه 😘😘😘😘😘😘😘😘😘😘😘👍
Great Idea, love the concept of modifying existing furniture that is readily available vs. building from scratch.
One unsolicited comment. You should refrain from wearing gloves when using power tools. It's a quick way to loose a digit or two.... Be safe.
This is awesome.
nice build.
Great video. Well done. Watched and shared the video with my group. Do you think Ikea would ever offer this an option in their furniture line.
I’m interested in buying one. How much roughly would you charge? I don’t mind paying shipping fees!
BadasS!!! 👍🏻
Love it! But how does the lock work? A closeup would have been helpful! I can’t figure out where the strip of metal goes. The incision made earlier with the blade seemed to be on the vertical panel…
Is the rear attachment for the knob something you found separate or did it come together?
awesome man i like it
Love the idea I was looking at videos so that I could try my own,but ur video is more broken down on steps thanks keep videos coming
What's the small square piece on the corner of the small drawer?? It doesn't appear to be there when you are painting it but it's then there when assembling it together?? Looks like the drawer front doesn't sit Cluch because of it??
This is awesome
Hey bro.. what n where i can buy for the key?
Shout out to this guy doing the work in his dining room. His wife is gonna be pissed. 😆
Big fan I just have to sub
Muito bom trabalho
I made it myself. Just take a fast look for woodprix.
Explain please?
Fantastic plans!
An easier way is removing your bottom drawer stack from your master bath cabinet.
Cut a nice opening on your base cabinet, big enough for your hands to fit. Set your gun on the bottom floor under your cabinet. Add a 1/8 thick material to cover the hole. Place your bottom drawer back on. No one would never know.
Joe Rubalcava but the idea is you are able to get to your gun fast....you can have your gun in your hand in 3 to 4 seconds.
If you have to remove a cabinet drawer, lift a piece of wood and reach trough a hole, you’ve probably used up 15 seconds. Which is a long time if someone has already liked your door in and is in your house.
Also, this kind of concealment is to use as a nightstand next to your bed for quick firearm retrieval in the middle of the night when you hear someone in your house. You don’t have time to run to another room to dig for your gun under a cabinet.
@@jerryglass6556 I agree what your saying,
I was thinking more about having a gun put away for children safely.
great idea! i also like that its not a step by step tutorial, makes people either think or skip :)
that system is so simple and clever! i might try this one day :D
Thanks a lot
@@AbonenDaw thank you for this video :)
Good morning, my friend, very top of your job, I'm doing an ingenuity to yours, which is the measure of the friend's drawer.
wut
At least with this it will keep everyone safe and important thing 😉 too
Hi!, where can i buy the lock like in 13:00 ?? Peace
Nice one
Salut valentin très sympa ton tutoriel je voudrais savoir si tu en fabrique pour la revente ?
Waooo super
Great video, but for your safety dont use gloves when using power tools its a for sure way to get your fingers pulled in to the business end of your tools.
Watching that saw handling gave me anxiety
Awesome good
Thanks for posting.. I wish if you explain the steps with voice over
Excepcional!
Man how I would love to make this myself!! But even with these somewhat instructions I’d still manage to somehow blow myself up
What kind of wood did u use
I’m having difficulty finding that hardware to lock the hidden drawer. Is there a specific name for it?
hi , i make this but i dont know from where you get this lock , this is the only part i didn't do
very good and nice idea pls where can get the accessories
Upon unboxing, I was immediately upset at how the rails were very noticeably bent. But I kept going, all tools needed to assemble were included czcams.com/users/postUgkxqtX4Dxs6aecAZEuz6GY5-d81YecKCshn and I had it set up in about 30 minutes. Honestly I love this thing, make sure to read the measurements and measure your space so you know if it'll work for you. I bought this to put inside my closet, underneath where I hang my clothes and it is absolutely perfect! It is VERY sturdy and all drawers glide easily and mine are stuffed, and they are still flush when closed.
Prego, cola e parafuso??? Qual calibre ele vaibguardar nesta gaveta?
what was the total cost of the build, apposed to purchasing one pre-fab'd
Hey Justin.
Truly, i paid 25€ for mélamine wood , 20€ for sliding hinges and 20€ for the black .
foam. I already had, glue, painting and tools so i think it was not expensive
in comparisons with prefab nightstand bought on the internet.
THAT..........WAS......... AWESOME! I subbed. I want one.
Do you have the dimensions? Or instructions on how to measure to create your own.
J’aime beaucoup l’idée ! Dommage cependant que la pâte fixée à la poignée soit visible par la fente lorsque le compartiment est verrouillé.
Oui sur la version finale, j'ai créé un petit cache en bois que j'ai peint en blanc pour cacher la tige. Cela se voit toujours un peu mais beaucoup moins.
nice
Bro that was clean i wish i had the patience to do that. You did it with an ikea drawer?
in fact . I reproduce the ikea drawer in melamine wood, taking the same measures as the original
You should email me those measurements lol
AbonenDaw omg I wanted tod o this with my ikea dresser thank you!
Can you make me one of this and i will buy it ?? how can i get in touch with you ??
Hey. It is okay for me. but i am in France. The shipping may be expansive?
Bom dia !
Sousa marceneiro: Sapé Paraíba Brasil
Instead of music explain step by step what exactly you are doin plz
something like this shouldnt be your first project, i recommend you try normal drawers first to get the hang of it. When you did that you will know how to do this :)
I agree, the awful music is very distracting and I couldn't watch it
this needs no explaining though if you just watch carefully i think.
@@hudortunnel9784 he can talk about his day, whatever, but this crap playing in the background....
@@Sawer But do you feel generic music is as good as a halfway decent narration? Many, if not most people watch these videos for entertainment only. And silent videos with generic music are simply WAY less engaging than narration that allows us to go through the process with them. Having only music on the other hand keeps us at a distance. I will never understand why CZcams creators are so willing to throw away the audio half of their videos. CZcams creators, please use ALL the tools in your arsenal!
great!
Were you not able to just modify the original drawer? seems like you could have broken it down and only made the smaller one from scratch?
Great idea. But never wear gloves while using a power tool like that. All you need is a thread to get caught in the blade and then you are in trouble with a serious injury.
Don't be silly. It's a drill, not a lathe. Nobody ever degloved a hand using a drill and people use gloves with them every day. As soon as you take your finger off the trigger it stops. Besides, a single thread isn't strong enough to deglove you.
@@dlwatib I was talking about the circular saw. Not the drill.
Yes i already heared this and i think you're right. I Will do it without gloves next time 😉
Vc está certo, mas é de cada um o uso de luva pois sem ela temos menas confiança na máquina e com ela não temos medo de pegar. fica a critério. RS
It's so obvious there's something hidden with how shallow that drawer is xD
Fill up the shallow drawer and someone may not notice how shallow it is.
And who's gonna think you have to twist the handle to get inside though?
Magnifique
Cool idea, however, when working with MDF, you should ALWAYS use a respirator
I agree..... explanations
Is your hammer big enough for those finish nails?
What's the handle called for the drawer
Great project!
I hate the music at the start so I muted it.
Good idea; headache inducing bgm and editing.
Do you sell them ?
👏جيد
Why do you have to nail it in after the screws and glue?
Do you sell these?
This was amazing. I don't understand why you couldn't use the original drawer, what am I missing?
he use MDF wood the original deferent
If he fucks up the build, he still has a functioning drawer.
To use a router on the inside of that drawer to place the hidden slides he would have had to broken it apart to do.
I like your choice of hammer for those tiny nails.
what product are you holding up at 13:17?
It's glue for métal
Astucieux👌👍
Usar guantes con herramientas rotativas es un peligro potencial saludos
couldn't you usw the original to mod?
can i buy a premade one? or someone make it for me and ill buy it
What an amazing secret Document, or Money drawer for the world, and a Gun Drawer for Americans...lol
Do you have like this in ikea?
Would you sell this ?
I presume this must be in America on account of the secret compartment being for a gun ! :O)
That’s funny: I thought for sure it was British on account of the gloves 😉 he wore for woodworking
Vous pouvez me le faire ? 🙏🏻
*nays*
What's the tool model in 2:23??
A router
This looks pretty self explanatory and if y'all don't like the music, guess what? Turn the volume to off. Not that hard! 🤦♀️ Great video, merci! ❤🙂
Yeah but could i just order one from you?
and then the nightstand topples forward and breaks your toe...nice one!
I don’t foresee that happening unless you pull the drawer out very forcefully
Night sand?
Can I just buy one from you.
Hey. It is okay for me. but i am in France. The shipping may be expansive?
@@AbonenDaw how much
AbonenDaw how much??
Gun compartment
👍👍🙏🏻🙏🏻
GLOVES!!!!!! Oooohh NO NO NO NO
Truẩn sáng tạo làm ngăn kéo đôi
Ótimo trabalho, vai servi muito aqui no Brasil pois o "Presidente da república" vai minimizar a burocracia na compra de armas. KKKKK
As
If only he actually showed us how.
Cleberde
I did it too. This is what I used Woodglut designs for
Make it wooden with woodprix.
Anyone opening that draw will know instantly there is something hidden by the depth inside compared to outside.
It's not foolproof, but if the home were burglarized, they are usually in and out very fast. Much less likely they will find the gun than just sitting in a drawer.