DJI Digital Installation Tutorial - Runcam Phoenix Link HD kit
Vložit
- čas přidán 21. 07. 2024
- A few friends have been trying to move from analog to DJi, but the installation of the digital kit is not straightforward. With many other tutorial options online for the past few years, I still see pilots new to digital systems still have a lot of questions so I thought I'd go back to the basics.
While they can choose to go with the DJI air unit, or the caddx vista, polar or nebula pro, I thought I'd bring something new to the tutorial realm with the Runcam Phoenix Link HD, which in my mind is the best of the bunch, especially at its price point. Check it out here at a special price:
shopee.com.my/Runcam-Phoenix-...
0:00 Intro
0:24 Information on the Runcam Phoenix Link HD
0:45 Choosing the right Flight Controller and options
3:45 Opening up an Air Unit Lite (Runcam Phoenix VTX)
5:30 Soldering up the Air unit lite
10:50 Connecting the ufl antenna
12:30 Connecting to the flight controller
14:35 Using an Analog flight controller how to, and external BEC
18:00 Runcam Phoenix vs Caddx Polar in low light
Special thanks to Oscar Liang , the source of the diagrams. check out his website at www.oscarliang.com
and also to Tommy Ummagawd for the excerpt on Phoenix vs Polar. his video is • Runcam Phoenix vs Cadd...
He also even says he can hit gaps better with Runcam phoenix :)
Malaysians, Check out my Shopee shop at www.shopee.com.my/adrinfpv
Lazada is at www.lazada.com.my/shop/adrinfpv
Thanks so much for this! This is exactly what I was looking for and you explained it well!
Very good information and explanation!
Great tutorial, Adrin! I ordered two of the units.
Great vedio!
Great video 👊🏻
Mantap bang,mampu tgok je, analog je pling sesuai dgn situasi kewangan sy skrg😂
Erk.. Boleh slow slow
Great tutorial, thanks!
Do you have tutorial on how to setup digital in beta flight and how to setup osd?
Salam dari Indonesia... Bagus sekali video tutorialnya.
Saya mau tanya, ada sedikit masalah yang saya belum tahu.
Macam mana menampilkan OSD dan macam mana merubah power air unit. Punya saya 2mw.
Terima kasih atas jawaban abang...
Osd akan tampil jika rx tx di sambung diuart FC, dan di betaflight Port, MSP di pilih untuk uart fc tadi. Pastikan rx di sambung pada tx, da tx pada rx. Kemudian utk menukar power air unit, di dalam goggle, tekan butang tombol di sebelah kanan atas Goggle. Saya tidak igt setting yang mana, tapi di situ ada option pertukaran power
@@adrinfpv Terima kasih atas jawabnya bang, saya coba cek kembali solderan tx/rx...🙏👍
👍
can i soldering the 2 wires from the FC dji controller in the runcam link even if i wont use them? tnks
14:23
That's all I need and the camera should be operational?
What software do I use to power the camera and what else do I need?
Also the video was well explained I'd just like more info on this system. Thanks.
You still need to activate the Runcam Phoenix Link with the DJI activation software and configure in Betaflight
@@adrinfpv thank you so much.
I'm currently watching lots of videos on this device.
Your video is the best one so far in terms of installation/explanation.
Thanks for the info on what is still required to get it operational. 👍
@@adrinfpv btw, I want to make this setup not for a drone but to use as a camera so i can mount it between my eyes to get a proper pov for Airsoft gameplays.
It'll be my first time playing so I'd like to record it and watch over it and show friends and cousins.
Sure its too much but I'm a nerd for tech and enjoy learning new things.
can i install this to dji inspire 2