Arcade1Up Pinball Mod - How To Install 32" Monitor
Vložit
- čas přidán 28. 07. 2024
- Arcade1Up Pinball Mod - How To Install 32" Monitor
Components I’ve used for this mod so far below:
LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Playfield): amzn.to/3t0JJgH
LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Refurb option): amzn.to/3fRnPJ2
Acer SB220Q bi 21.5 Inches Full HD Monitor(Backglass): amzn.to/3kLGOoU
Acer SB220Q bi 21.5 Inches Full HD Monitor (Refurb option): amzn.to/2NZ79Uc
FREESCALE SEMICONDUCTOR FRDM-KL25Z Board: amzn.to/30pNzDv
FREESCALE SEMICONDUCTOR FRDM-KL25Z Board (secondary source): amzn.to/3uRfRVf
VirtuaPin Plunger Kits: bit.ly/30bRp2L
SainSmart USB Eight Channel Relay Board for Automation - 12 V: amzn.to/3cW6r2B
35 Pack 1N5349B 5W 12V Power Zener Diodes 1N5349 5 Watt 12 Volt Axial Diodes: amzn.to/2NHzgY5
8pcs (4 Sets) 8 Positions Dual Row 600V 25A Screw Terminal Strip Blocks: amzn.to/2QpGmkN
DC Power Pigtail Cable 12V 5A Female: amzn.to/3c8pgjZ
Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm: amzn.to/391rO1p
Lepy LP-2020A Class-D Hi-Fi Digital Amplifier with Power Supply Black: amzn.to/3ri7U8M
Amazon Basics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet: amzn.to/392hfuU
StarTech.com 7.1 USB Sound Card: amzn.to/3174ZoD
Monoprice 100665 6-Feet 3.5mm Stereo Plug/2 RCA Plug Cable, Black: amzn.to/3tInXOA
30 PCS 2 PIN JST XH Female Connector on One Side: amzn.to/3f4Eatj
BCQLI Game Console Motherboard Fixed Plastic Feet,20 pcs: amzn.to/3tQ1cIJ
HumanCentric Adjustable SFF Computer Under Desk Mount: amzn.to/319K58d
Click Here To Subscribe: bit.ly/2OoPsJa
Join The Facebook Group: / youtu. .
Join The Discord: / discord
Follow me on Twitter: @cooltoy_23
Follow me on Instagram: @cooltoy_23
If you would like me to do a video showcase or review of your products or for other business inquiries, send me an email: cooltoy_23@yahoo.com
00:00 Intro
01:37 Overview
01:57 Fully Decased
03:45 Supports
04:45 Glass Install
07:07 Inside Cabinet
07:50 Cropped Area
08:19 Closing
#arcade1up #pinball #arcade
Some of the product links in in this description box are affiliate links. As an Amazon Associate I earn from qualifying purchases. - Hry
What do you think? Too big, or just the right size? Let me know in the comments below!
LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Playfield): amzn.to/3t0JJgH
LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Refurb option)://amzn.to/3fRnPJ2
Legend
The best mods are often the most difficult and complicated. I know this from my modding but the end product looks awesome!
Awesome job! I think you have your product links backwards.
I'll have to let you know after I install the one I just ordered! :) :)
For the tempered glass upgrade, what are the exact dimensions the glass should be? Also, should I use 1/8" or 1/4" glass?
So stoked, got my star wars pinball on Monday. Very happy with it now but fully expect to modify it eventually. Appreciate this coverage of your mods.
Glad I could help, enjoy your new machine!
Thank you for being so detailed. This is going to help me with my 1UP arcade pinball project that I have upcoming. Just getting the lcd ordered and will be buying a damaged unit for cheapo but doesn’t matter because it will be gutted and then following your awesome steps in this video!! 👍😎🤙
the depth effect is UNREAL, I plan on doing this to my unit if I get bored of the games
Well Doug I just ordered this monitor after watching this video. All of your other videos have been of great help to me (and can't thank you enough for answering previous questions I've had) and this seems pretty straight forward. I think I can handle removing a brace and flipping it over to be used in the back. :-) And de-casing wont be an issue.
That is one hot vpin! Love the space saving cabinet size combined with excellent playfield, backglass, and dmd ratios. You really knocked it out of the park, and I appreciate you taking the time to share how you did it and a complete parts list. Thanks!
Glad I could help!
Me too. I just found this thread and I have already odered everything including the A1UP AFM cab to mount it all in. I have built many MAME games but this as you say knocks it out of the park! Doug I hope you have time for me if I have questions!!!! Thanks so much!!!!
Your virtual pin videos are the best! They definitely pushed me to mod my AFM cab and I'm almost finished now. Just need to wire up the buttons & plunger and configure. Then install the 32" monitor in the cab. Everything has worked out perfect so far. That Acer is incredible in the back box. So easy. :-) And the PC mounting bracket underneath works awesome for the SFF computer I'm using too. Thank you for your videos! ;-)
Glad I could help!
Love the videos you make. I’d really like to see you mod the cabinets so we have a step by step as you were doing it.
It looks so much better with the 32" playfield and that black apron bit at the bottom gone. Excellent job.
thank you very much!
Thanks for the guide on what you did. I was originally going to build a full size cab but I think the A1U frame will be plenty big enough for what I want and not take up too much room.
Glad I could help
Thanks again for the Mod tips!! Just installed the 32" monitor and it really looks good, GREAT recommendation!! I'll be getting some Lexan/plexiglass instead of tempered/rolled glass because this will end up at our local Rec Center in Locust Point, Baltimore, MD, with lots of kids once COVID restrictions ease up. This will look great next to our 4 player stand-up Retro arcade/ 4 player stand-up Steam Bigbox arcade, 4 player motion arcade w/Xbox 360 Kinect running Aurora, and 7 player Rockband/Guitar Hero music Arcade. Will be adding two Sinden Lightguns to the Steam Arcade once they come in. If you're ever in the area feel free to check it out!! Thanks again!!
You are killing it brother!! Keep up the awesome work!!
thank you very much!
For anyone looking for 32" monitor alternatives, I used the Viewsonic VX3276-mhd. This was a PERFECT fit with no decasing. I used the 1080p model, but the 2k model had the same dimensions
i.imgur.com/Luk6uMu.jpg
How did you fit the depth w/o decasing? There is a large bump out on the back bottom side.
Awesome video as usual. The v display you recommended for the stock monitor is perfect. I was able to change the colors and turn down the brightness. What a huge difference. It's a shame that they couldn't do this before they shiped this out from the factory. This 32-inch mod has got me tempted. Maybe down the road. Thank you for making awesome content and helping me mod my cabinet. Shout out to Nail Buster for being the man and providing us with the software to make this happen. If I could I would buy you a beer.
happy to hear you were able to get the monitor settings tweaked to your liking. Totally agree, Nailbuster's software is truly an amazing gift to the community, can't recommend it enough.
@@cooltoy broke down and ordered the 32 inch monitor this morning. Now going to call the local glass shop. Thanks for making an enticing video lol
Thanks for video. It looks great. Furthermore, thanks for all your videos on digital pinballs because they have all been so helpful and desired.
Glad you like them!
Very cool 😎 modifications! Excellent and masterful job!
Love these Cooltoy R&D videos. 🦊👊🏼
Excellent job, Doug! I really wish we had more options in the market. I would pay for a 1up (toy) virtual pin if it had a higher resolution 32" screen and priced around $1000. I feel it hits a perfect sweet spot between the minimal 1up and a much more expensive virtual pin.
Can i just put in the 32inch monitor as described and the machine will still be fine to play
You can do his mod with a 2k screen and the marseilles will upscale 720p to 2k.
Damn that 1up screen looks like 1st gen LCD compared to that IPS. Badass mod man!
thanks!
Like a glove. Very nicely done!
thank you kindly!
I'm a little late to the party on this. Just did this mod this weekend. Though I kept my pcb stock. The geekworm 1.5 did not work correctly. Had to use the V20 version. Along with the screen fix file from teamencoder, it worked great!
I added the Marseille mCable Classic in line with the hdmi output. Gotta say, if you are keeping the pcb stock, this IS A MUST!!! Along with the ability to control the monitor settings, contrast, brightness etc. Adding this just rocks. It upscaled the image to true 1080p AND added anti aliasing. WOW! What a difference. Kept the pcb output in 720p so I didnt lose performance.
Any info on how you got the geekworm V20 to work? I can't seem to figure out the proper pin/plug configuration on the V20 to get the signal to the monitor.
Thank you SO much for showing us how to do this. It looks amazing! By the way, I got my Marvel Pinball in, and found I can NOT see the DMD, so I'm in the process of prototyping a magnifying device to park in front of the DMD, so I can see it. It's pretty simple, just a couple of suction cup tipped toy arrows, and a pair of lab clamps, with swivel grips, which will hold a Fresnel page magnifier, at just he right angle. The magnifier makes the DMD look nearly as big as a 4/4 scale DMD. I'm definitely going to have to look into installing 31" monitors. Using the 24" screen, with the included tables is like playing pinball with a BB. LOL That's really hard for me to see. Congrats on getting that monitor in, and the exterior detail work reinstalled, nicely! :)
glad to hear you McGyvered a solution for the DMD for yourself, I know that's one complaint my wife has made about our Star Wars pinball, that the DMD text is small and hard for her to read.
@@cooltoy Ah, sorry to hear your wife isn't able to read that tiny DMD, either. All the stuff you need to make the device is on Amazon. Just look up Fresnel page magnifier (7x10), for the lens, and just toy arrows, lab clamps (test tube holder clamp). The arrows' suction cups hold nicely, to the plex, or rails. Position about 3, or 4 inches out from DMD, and center along sightline, between DMD, and height of eyepoint of player.
I would pay you serious cheddar to mod mine like this. Amazing
Thank you. This video was very helpful!
Glad to hear it!
Great content thanks for sharing ! 💥
That is amazing!
Thanks for the video man.
I'm going to build one.
Go for it!
@@cooltoy
How long did you have that pinball cabinet before everything started crapping out on you?
Perfect Mod! Looove it
Thank you!
This should have been stock!!!
Now I want one!!🤝
Great video!
thank you
Killer job man
Thanks 🙏
I'd like to see a 27 inch monitor in it without too much modification if possible. Great video as always!
I'm not going to be downsizing from this set up personally
In VPX you can manipulate the tables so you dont lose that bottom cropped area. You can also resize in nvidia control panel as well. I think I'm going to stay stock playfield screen. I like ease of access to my PC inside. I'll do something like this when that monitor blows out.
true, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mention it just to be up front with everyone on the end results.
Just scored this 32" Monitor for $75 looks great for 1080p
I am excited to try this! I have a couple questions. How easy is it to get inside the cabinet once this monitor is installed? Are you able to use the original monitor base to angle it up or will the monitor have to come out completely? I'm also assuming you had to completely remove the original monitor from the machine, but I just wanted to make sure. Thanks for the content and always engaging with your viewers!
you can get inside the cabinet through the backside panels. Otherwise you would need to take off the trim pieces, remove the glass/plexiglass, and remove the monitor if you needed to access the inside front of the machine. As shown in this video, I'm using the original monitor base frame. The original monitor will need to come out as there is no sense in leaving it inside and then placing a new monitor on top of it.
Looks so much better
Doug great video as always? Any future mods to your 1up pInball?
I think I'm pretty much done at this point, not a whole lot left that interests me in terms of changing the machine any further.
Very nice mod!!!
Great video. You mentioned that the custom glass had "rolled edges" Is this the same as "Seamed Edges"? If not, what's the difference?
Wow! Just wow!
Thank you for these Arcade1Up pinball videos. Currently with my Marvel machine I have done your first two videos minus the SSF using all of the same parts. The Amazon links are very helpful. I'm currently waiting for my backglass monitor and the 32 monitor. I will be doing those two mods next. I have question on your power management. Are you still daisy chaining off of the stock power supply with those splitters to power the backglass monitor and 32" playfield monitor? My stock power supply is currently powering the DMD and playfield monitors as well as the sainsmart board. Thanks again! These videos have been inspiring.
My back glass monitor and playfield monitor are both separately plugged into a power strip.
@@cooltoy Thank you!
Hey Doug - followed your video and everything was as simple as you showed. I’m noticing some tables in Future Pinball now look pixelated. Is there any software setting adjustments you recommend with this monitor? Thanks for your videos, they’re great!
Double check the resolution setting you have for the playfield inside Future Pinball. Or check to make sure you have the latest drivers installed for your graphics card.
How much $ to get you out to NJ to mod mine? Great work man - maybe one day ...
Hey Doug I tried the LG monitor with the Geekworm board from your other video and the screen either doesn't turn on or cuts in and out. Any suggestions?
You can alter the playfield size anyway in vpx and future so cutting off the bottom isnt an issue.
true, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mention it just to be up front with everyone on the end results.
@@cooltoy absolutely sir, PLUR.greets from Spain
Just perfect👌🏻
thank you so much 👍
Love it 😀
Thanks 😁
Would be good if someone made a 32inch kit for these machines. I feel the standard monitor looks just way to small for the cabinet
Curious as to what your total investment was in this machine with the monitors glass and all other components.
Great video. I was just about to buy both monitors but they have gone up about 30% in price 😭
Oh no!
Great mod!! How's the angle and depth of the play field feel? Are you getting any reflections off the tempered glass or between the 32" screen and glass that make it harder to see the play field? It looks great! I just got my pc and vsdisplay for stock 24" at 1080p and extra back screen monitor installed in the cabinet. Connecting the buttons and plunger this weekend. Will seriously consider updating to 32" in the future. Just worried about angle, depth, reflections and glare.
The angle of tilt is almost the same as it was for the stock monitor, so no complaints there. Also zero issue with glare or reflection from the new piece of glass.
@@cooltoy I'll be upgrading to 32" then, thanks for all the tips!!
You are using Steam to run your tables right? I thought I heard you say that before..? Id love to know exactly what youre doing to power on and off the PC etc. I know you can boot into steam or big mode.
What would you recommend if I wanted to put a 120 or 144 hz oled 32 inch monitor in it
What are the specs (or link to) of the PC driving this (that fits in cabinet) and Atgames pinball mods?
Will The Academy Please Give CoolToy An Oscar for the MOD of the YEAR🙏🏻🏁❤️👍💍
much appeciated!
@@cooltoy ❤️
I know this video isn’t about it but I was wondering your opinion on buying a full size pinball machine from xtremegamingcabinets. They used to be called Retroplay. They’re a company out of Australia. I just want an himself opinion on buying the best full size vpin and I trust your opinion. Thank you.
is there a way to put a monitor in the back screen to change to whatever table you are playing?
Dying to know... what did you do with the stock monitor?? I'm about to embark on this and looking for ideas on how to put that to work. Thanks for the great videos, they've been an extraordinary help getting this cab converted.
Stock monitor I donated to a friend
Awesome Doug! Now about those roms... Lol with the shut down of VPin, where else can we go for a sweet front end like that?
Nailbuster.com for the front end
@@cooltoy Thank you Doug! You are awesome!
Question for those who are really intelligent concerning virtual pinball machines. Would this monitor upgrade work along with the current software used by Arcade 1Up? Cooltoy mentions that he is using a computer. Also, I do not know how to get these pinball tables downloaded on my computer. Seems as though many free sites have been taken down. Please, any help you can provide would be great.
hello. Great video. Can you tell us what Vdisplay convertor you are using for the monitor? Or is it connected directly to the PC?
Connected directly to the PC via HDMI
Great mod.
So what’s now driving the bigger display and how did you up the resolution from 720?
I have a PC inside
If I buy a 27 inch monitor to install do I need to also buy a cable to plug in the monitor to the PCB?
Hi since the update on attack from Mars pinball. I haven’t been able to get video mode on fish tales table. Anyone else have that problem?
do you have another video that explains the hardware in this build in more detail? I was wondering what kind of controller board is making your buttons work? Is it some kind of USB connection to your PC?
yes, I made other videos on this channel about this build showcasing and explaining every component used so far.
Great video! Since the monitor is 75hz are you running the games at 75 fps?
Yes I am
Do you think it would fit if you leave the thin metal rim around the screen on after decasing the main plastic frame? I’m scared of cracking the screen without that on because of how fragile it is. It’s already a tight fit while loosening the sides. Seems like you need to be very delicate lifting the monitor to get underneath for access.
only way to know for sure is to try it out
Before i saw your live video and you posting this I was trying to figure out what monitor I was going to go with. Asus has a thin body 31.5” (found on Best Buy) that I was thinking of using. Seeing the 32” I see you used, I wonder if the .5” less would be just enough where you wouldn’t have to uncase it.
I’ll most likely just order the monitor you used though, wife will kill me if I keep buying and returning shit 😂
31.5 might be the magic number for those of that dont want to pry the bezels off. It looks like most 31.5 screens are 2 inches less in height compared to the one used in this video
@Josh Hundley it'll will be a case by case basis since all monitors are made differently.. I contemplated using a few other different monitors but had to turn away from them since they had their HDMI input ports on the sides of the monitors, and I knew that would be problematic for the install. Lots of little things like that I had to keep into consideration. Though you may very well get lucky and find that you don't have to de-case that particular ASUS monitor. If you get it, let me know how the install works for you as I'd be interested to know the end result.
Nice!
Please do a video on how to install the back glass monitor, and how to set up your computer to be able to use both monitors.
Also,. what pinball software are you using and let us know how you mapped everything out to get this awesome setup.
Seems as though many people are not sharing their knowledge to dumb people like me.
I’ve already done all that in other videos
Could you help me do this to mine?
So I noticed while rewatching this video (i'm installing my 32" tday) that I'm seeing a colored DMD while playing FX3 tables. What did you do to make that work? Something with Freezy and Popper? Just curious as I'd like to do that as well. Thanks!
colored DMD was from VPX tables not FX3
Thanks for the video! I just ordered this game and the 32" screen upgrade looks like a must. If I take a stock game can I add the larger screen? Will it go to 1080 or stay at 720? Or are their other pieces I need to add?
I have some videos to watch through!
if you keep the stock PCB you will need a geekworm adapter to convert the LVDS signal to HDMI. You will also need to reflash the PCB to get it to work properly. I replaced my PCB with a PC as shown in this video.
I used the geekworm v20 hdmi adapter. Had to add the teamencoder screen fix file. Then it worked correctly. If you are keeping the pcb stock, definelty would suggest an upscaler of some kind. I used the mCable, about $89 on Amazon. Upscaled it to 1080p and added anti aliasing to smooth out the graphics and jaggies. Looks way better. Cheaper option than a pc, and you are wanting to keep the pcb.
Dude, this is so badass!!! Now to just find an actual machine…
Glad you liked it 👍
To fix the cutting off the bottom of the play field couldn’t you adjust your computer’s overscan settings?
In windows 10 you can not scale below 100%. In VPX you can adjust the table size though and prevent the bottom from being cropped, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mentioned it just to be up front with everyone on the end results.
Hi Doug, I've watched this video a few times now and wondering how the 1080p screen is working out over the 32" playfield for pixel pitch. I'm curious if now that you have had it for a while, do you want to go to 2k or 4k to bump up the res? I'm about to do this mod myself and am looking at a 1080p 75hz IPS panel, and weighing up whether to go with 2k instead. Thanks, and great videos. I've subbed.
I got rid of this machine a while ago now. But when it comes to virtual pinball I’ll tell you higher frame rates will give you more enjoyment and play experience than higher resolutions will. So if I prioritize getting the highest frame rate monitor you can for your budget and that your pc specs can handle
Thanks for the info, did you keep your atgames also or is that one gone? Curious if you have any virtual pinball cabinet now?@@cooltoy
“I HATE YOU”
But seriously Doug, amazing job.
For a little more money Arcade1Up could have done the upgrades,
and totally blown peoples minds....
BTW, I still love my Marvel Cab, but seeing what they could have done
just makes me want more....
Can we say, next generation?
Listen up, Arcade1Up do the upgrades in the same size cabinet!
Do generic cab artwork, package all 30 games, upgrade to 1080p
I’ll be first in line to buy it....and while I’m wishing for the moon...
Plug in modules (or some way for idiots like me to easily) install
game packages we can additionally buy.
I think that about covers everything...lol
Love your posts Doug...👍🏻❤️😎
I'm still personally shocked Arcade1Up didn't at the very least include internet connectivity and the ability to download and purchase new tables on their machines. Seems like that would have been a no brainer money making option.
Thanks!
Cant thank you enough for all of the great videos and assistance as I have worked to upgrade my pinball machine.
Nice setup! Mind sharing what graphics card you chose?
Gigabyte GeForce GTX 1650 D6 OC Low Profile, which is technically a little over kill for my particular mod pc of choice
I read in the comments that you have this 32" monitor plugged in separately to a power strip; When you turn on the power strip, does the monitor turn on as well, or do you have to take an additional step and press a button on the monitor or a remote to turn the monitor on?
Monitor comes on automatically when I turn on the power strip
Do you need anything extra when upgrading on stock pcb? Is a Geekworm LVDS needed or is it plug and play
I’m not using the stock PCB I’m using a PC
Hey,
Is it possible to show how you actually connected the monitor to the computer inside the machine? I'm not an electrical guy by an means. I still haven't picked up the initial pinball machine, but I plan on doing so very soon.
Just a simple HDMI cable connection for the playfield monitor
What kind of pc do i need not wanting to spend alot
Hello,
What 30” dell monitor would you recommend for this modification? I’m looking to use a 30” monitor and the original PCB.
Simply put, I wouldn't recommend a 30" monitor
How are you liking this addition? Still dig it? I am still using the stock monitor with my gutted popper 1up. Sometimes I think it is not necessary, some days I think it would be awesome. My only problem is I like the deep recess of the 24" I don't want to do the effort and wind up not liking it. I guess I can just lay a monitor in there and see if I like it.
I love it personally, but to each their own. Do whichever you feel suits your needs the best, I don’t advise on investing time and money towards a mod if you yourself don’t feel you NEED it.
@@cooltoy I know, I just wondered if you changed your mind. Your first 32" concept you seemed to be for the 24". But did you not have both cabs at that tiime? It seems like a good mod because the backglass is nearly as big as the playfield, sometimes it looks bigger lol
I want to know how can I add tables on my legends Pinball like all do with the arcade games. Thanks 🙏 man
Connect a pc via OTG and your good to go
very late to the game. Just purchased the 1up starwars pinball. Can I just update the monitor without any other mods? That much I can do on my own.
CoolToy,
So the moral of the story is... Buy the AtGames Legends Ultimate Pinball when it becomes available again :) I see what you did there :P
Just Kidding :) If I was into modding, this is a great upgrade
vgv
The AtGames machine is pretty great too, very very easy to add a PC to that device as its natively set up to support that type of thing
Can you connect this monitor to the stock A1up PCB?
Not without using a specific LVDS to HDMI adapter board, and even then there is no guarantee it would perform correctly or look good. I would advise against it personally.
which lvds to hdmi controller board is needed for the tv you recommended
geekworm is really the only company making the lvds to hdmi controller board. If you are connecting a PC to the monitor you wont need it though since you could connect via standard HDMI. The only reason you would need a lvds to hdmi controller board is if you were trying to use the stock PCB with a different monitor.
Great Video! Ordered the monitors, When you used "FRDM-KL25Z " do you have a link to a pre assembled one with the pre installed headers? Could you use a Zero delay 2player instead? TY
You can use a zero delay encoder, but the plunger won’t connect to a standard usb encoder since it’s an analog input. There is a Geeekpi encoder that works that uses normal digital button inputs as well as analog inputs that you can use if you don’t want the KL25Z board, but you lose analog nudge capabilities if that matters to you.
I believe this is the site that sells the KL25Z with the headers preinstalled virtuapin.net/index.php?main_page=product_info&cPath=8&products_id=131&zenid=8iimjqqpuj05j8c08j632tf257
@@cooltoy thank you so much!
@@cooltoy sorry is this kit all i would need to get both the board with headers like you used and also the ability to utilize the plunger ? This seems to be the board and plunger kit together?
virtuapin.net/index.php?main_page=product_info&cPath=8&products_id=105&zenid=8iimjqqpuj05j8c08j632tf257
the link you provided is the all in one kit, has the board, headers, wiring, plunger etc. That's the same kit I'm using currently.
@@cooltoy You are the best. TY
Doug, how did you actually de-case this monitor? I've got the unit, and there is one screw on the back next to the HDMI, but I assume I've got to pry it open? Where did you start? Bottom? Any tricks or "watch outs" to know about?
I used a thin flat head screw driver to start prying off the out casing. Just slowly working my way around the monitor in circular fashion until I was able to pry off the bezel
@@cooltoy Awesome. Thanks for the fast response. Done and done. For anyone following, it's easiest (I think, at least on mine) to get it off at the bottom once you do a once around with a very very thin screwdriver. There will be some snapping sounds as the plastic catches disengage. After black casing is off, you then also need to remove outer silver frame on the edges to get it to fit in the pinball unit. Remove the black tape to get at the outer silver frame and then stick the tape back. You can sort of see how Doug did this at 2:05 (black tape shows signs that it was unpeeled and then re-stuck on after) and when you are done it will end up looking like it does at that time stamp. On my cab, I also loosened the top four screws just a turn to give some extra room - otherwise my monitor wouldn't quite fit (even with the "diet plan").
@@dimmydinosaur5571 I got all the way to the point of decasing everything and loosened the top screws on the body but it still feels tight. The screen is so thin and fragile I think any bending or pushing may crack it trying to get it in. Was it difficult for you to get it in such a tight space
So I'm not too tech savvy so please forgive my ignorance, but does the PCB, the stock monitor or both hold the res to 720p. More directly, can one improve the resolution with the stock PCB with a better monitor?
the stock arcade1up PCB is what is holding the display output to 720p. The stock arcade1up 24" playfield monitor is 1080p capable, yet only displays 720p when connected to the stock PCB due to the preset output coming from the PCB. You can not make any changes to the Arcade1up stock display resolution while maintaining the stock PCB.
@@cooltoy Ok thanks for the clarification. Now I won't waste time and money on something that won't pan out. Good video BTW.
But does it look any better? Is it sharper, brighter, less blurry ??
yes
How do you deal with the power buttons on the 2 modded monitors?
everything powers up automatically when I flip on the power outlet bank I connected everything to.
Seems like a no brainer. Do you think Arcade1up will make a "legend" or premium version of these with bigger screens?
If there is money to be made, then Arcade1Up will make it
@@cooltoy their decision making has been sus on a few things so..
Did you make any other mods to the electronics? Just replaced the monitor correct? No other electronics ?
I removed the stock PCB and replaced it with a PC
@@cooltoy so just doing the monitor prob isn’t worth then?
Curious how does the 32” monitor look compared to the 24” running on the pcb with the 1080p pinner mod?
PC version of Zen Studios tables will always look better than the android counter part
@@cooltoy true, but just wondering if swapping in a larger display would improve the visuals over the stock display with the same PCB. Also, are you able to get the solenoids to work with the PC?
I’m late lol but does anyone know if you can do this without using a pc and it still work?
It seems his first video doing this mod.. He had it all stock.. But the screen sat right close at the top.. Versus this method where he removed the stock PCB.. and he hooked up a computer allowing the screen to sit lower in the cab.. Check out his other video
Hey bud, what LCD controller board did you use for this monitor install?
None. Monitor plugs directly into my PC via hdmi
@@cooltoy Ah, gotcha. That's easy LOL. So how do you make screen adjustments? Did you leave that portion of the monitor intact?
Will this work with a stock machine? Or only through using a computer?
Won’t work without a geeekworm lvds to hdmi adapter and reflashing the stock PCB. Personally I don’t recommend doing that