How to Remove Fluorescent Light and Install T8 LED Tube With Casing Fitting DIY
Vložit
- čas přidán 26. 09. 2022
- T8 fluorescent light to LED conversion with casing fitting at Home.DIY
You could save a lot of money on energy by replacing your fluorescent bulbs with LEDs. They keep cooling costs down - You also may be able to trim down your cooling expenses as well. Fluorescent lights don't generally produce a lot of heat, at least not as much as HID lamps, but they do burn hotter than LEDs.
An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.
There are various methods for converting fluorescent lighting fixtures into LED ones. However, the simplest way is to use some sort of retrofit kit. These kits attach to already existing lighting fixtures and allow for LED bulbs to be housed in them.
Why Convert to LED?
1. Save electricity bill. LED tube lights save over 50% on the electricity bill.
2. Low maintenance cost. The lifespan of LED tube lights is much longer. High quality LED tube can get 5 years warranty. Besides, if you use a ballast bypass solution, you do not change the ballast either.
3. Rebates make LED retrofit free or low product cost. LED tube lights with DLC certification can get rebates in many utility providers. Sometimes, rebates are higher than the product costs. Click to check the rebates of your local utility providers here.
4. Eco-friendly. The fluorescent tube contains mercury, but LED tube is absolutely eco-friendly.
How to Convert 4ft Fluorescent Tube to LED?
There are different methods to convert to LED. Initial cost and maintenance cost are different.
1. Type A LED Tube - Plug and Play (Compatible with Ballast)Type A LED tube lights is compatible with ballast. It supports plug-and-play. However, product cost and maintenance cost is higher. Ballast compatibility may be a problem too.
2. Type B LED Tube - Ballast BypassType B LED tubes can install directly on T8 fluorescent light fixtures. However, the ballast needs to be removed before installation. There are two kinds of type B LED tubes, which are single-ended power and double-ended power LED tubes. The single-ended power LED tube needs to rewire, but it’s cheaper. Double-ended power LED tube can work directly on fluorescent light fixtures after removing ballast.
3. Type C LED Tube - External driverType C LED tube comes with an external driver, which provides more flexible installation. However, product cost is much higher.
#fluorescent
#ledlights
#diy
Top Search:
How to install T8 Led lights
How to convert Fluorescent Light to LED Light
How to install Fluorescent tube lamp to LED Tube lamp
How to replace Fluorescent Light to Led light
How to convert T8 Fluorescent lights to LED
Fluorescent to Led conversion
Ballast Bypass LED light conversion
How to easily convert fluorescent lights to led
Fluorescent to LED conversion
How to convert fluorescent fixture to LED
How to Wiring LED lamp
How ti install led T8 Tube
Cara convert lampu pendaflour / Kalimantang kepada LED
Cara mudah wiring lampu kalimantang biasa ke LED T8
Cara tukar fluorescent LED Tube
Tukar fluorescent LED
Cara convert lampu pendaflour kalimantang kepada LED
Ubahsuai lampu pendaflour lama ke LED - Jak na to + styl
terima kasih 🤝
Sama 2🤗
Thanks for the video tutorial!
You’re most welcome
👍🏼 Thanks
Welcome
salam,nak tanya,saya punya wire hijau tuh pendek tak sampai nak pergi ke screw hujung tuh...mcm mana ya?
Wire hijau tu untuk grounding.Kalau tak sambung pun tak ada masalah.Yang penting wire live dan neutral perlu di sambung untuk hidupkan lampu.Kalau nak sambung juga,boleh guna tambahan wire lain untuk panjangkan wire asal.
@@TonaziTube ok terima kasih 💕
@harrasfaiz Sama2 Tuan.
@harrasfaiz Semoga dipermudahkan urusan
Need a ladder 🙂
You need to climb 😺
This is an old T8 lamp. Our company has produced LED T8 tubes ten years ago.
Thanks for the info sharing
@@TonaziTube You are welcome! Because I am the factory that produces T8 tubes.
Glad to hear that!👍🏼
turn that crappy annoying distracting background music off.Why did you have to disconnect the ballast and so on if you replaced the complet light package??
Sorry for the music issue.You may slow down the volume(decreased).You might not remove the ballasts if want do so.
@@TonaziTube wtf is this english, who can read or translate please? lmfao
or turn off your volume sir?