That’s a great wife, so helpful, my Wife wouldn’t allow me to even change the alternator in the garage, I had to do it in the driveway. She was never supportive, now my X wife
One other reason I like your videos is, for example when you’re pulling the body off, I could see what a hard top c pillar looks like. I was able to see the gas tank straps a little bit and a lot of nooks and crannies (fuel lines etc) that you wouldn’t otherwise get to see.
Thanks for making these…I’m currently doing this with four wheelers and I plan on graduating to humvees once I make enough money….I’ll be watching the heck out of these!
There are wire splices with solder in it a stove lighter to secure it and heat shrink over it Paint with marine awlgrip paint and primer, use alumiprep and alodine for metal treatment b4 paint
I’m actually in the middle of a slant back build right now. I’m in too deep to turn back but my suggestion is don’t do it. 😑 unless you really really want a slant back. The parts are becoming harder to find and they’re getting more expensive. If you’re going to do it use the OEM stuff unless you can TIG weld and are up for doing a bunch of bodywork.
nice work, wish I lived next door, I'd be there the whole build! ever think about renting a warehouse space for this build so as to increase space efficiencies? pretty soon you'll have to pave the front yard for all the vehicles! :)
Another great video. Finally was able to pick mine up from Yermo California last week. Now you have me thinking I should. Do videos as well. You even have me thinking about doing a body off restoration. I am thinking you will put the body back on outside, or remove the A-pillar to have added clearance. If I was closer you could use my M1084A1R to lift the body back on.
So awesome series on each vehicle build... Both the vehicles when bought were not operational... How do you approach if there is blow by on the engine?
If there’s excessive blow by, that means the motor is extremely worn… You’ll get maybe a little life out of it. If you’re able to bid or buy one that is running and no or very little blow by present is where you want to be.
Hi there , loved your work . Finally mine got release and wondering where do you rent the trailer ? Thinking about haul trailer but it’s looks unsafe. Thanks
I’ve gotten some trailers from Sun Belt rentals before, the trailer I just got I found on Facebook, because I Couldn’t find one for rent that was wide enough through a company. A lot of companies out there have them though, just make sure they’re 82 inches wide between the wheel wells
the hummer h1 is such an amazing vehicle - so modular!
That’s a great wife, so helpful, my Wife wouldn’t allow me to even change the alternator in the garage, I had to do it in the driveway. She was never supportive, now my X wife
Do slant back! Thank you for your service! And these videos!
The way you were slapping the top of that table, all I could think of is you saying this baby will hold so many ovens.
😂
One other reason I like your videos is, for example when you’re pulling the body off, I could see what a hard top c pillar looks like. I was able to see the gas tank straps a little bit and a lot of nooks and crannies (fuel lines etc) that you wouldn’t otherwise get to see.
That’s what it’s all about!
Many fine pieces looks like aircraft parts
Thanks and keep making these films love it and it really helps big time!!!!
I’m glad its helpful
Thanks for making these…I’m currently doing this with four wheelers and I plan on graduating to humvees once I make enough money….I’ll be watching the heck out of these!
Slant back for sure!
Looks good
My vote is no slant back
Awesome. ! Thanks for sharing your progress
That’s what it’s all about!
Great video!!! I'm building a slant back from sheet metal and a thousand rivets. Parts are just too expensive 🤦♂️ keep up the good work 👍
Grommets can be sourced from aircraft spare stores like aircraft spruce
There are wire splices with solder in it a stove lighter to secure it and heat shrink over it
Paint with marine awlgrip paint and primer, use alumiprep and alodine for metal treatment b4 paint
So awesome brother, definitely hard work but so worth it. Love how at the end you said how grateful you were for your wife ‼️
🤜🏼💥🤛🏼
Good job. Hard work. Making memories. Thanks for sharing.
I love your attitude! No excuses. 👊
My Humvee is arriving next week !!!
Yes, this GA humidity has been brutal lately - slowing me down on my humvee build :)
Wash the frame and engine to get all dirt off
Great job. That’s awesome
I’m actually in the middle of a slant back build right now. I’m in too deep to turn back but my suggestion is don’t do it. 😑 unless you really really want a slant back. The parts are becoming harder to find and they’re getting more expensive. If you’re going to do it use the OEM stuff unless you can TIG weld and are up for doing a bunch of bodywork.
dude this look like so much fun!
100% slant back!
great video
thank you
Jim Bella
0 seconds ago
A peek at the "Serial Data Plate" should indicate which model we at AM General built it as.
Yes of course
Slant Back!!!
The slant back H one hummer is awesome it is a hummer that I wish I could own
nice work, wish I lived next door, I'd be there the whole build! ever think about renting a warehouse space for this build so as to increase space efficiencies? pretty soon you'll have to pave the front yard for all the vehicles! :)
Haha for real!
Another great video. Finally was able to pick mine up from Yermo California last week. Now you have me thinking I should. Do videos as well. You even have me thinking about doing a body off restoration. I am thinking you will put the body back on outside, or remove the A-pillar to have added clearance. If I was closer you could use my M1084A1R to lift the body back on.
Yeah definitely going to put the body back on outside. Glad you were able to get yours!
I’m gonna have to remember that saying for my wife. “work with the inches that was given.”
Lol…love the fact that you work barefoot. Glad to see I’m not the only one…
😆
Make it a slant back!
16:48 After doing the 2" body lift, going through the body is no longer necessary.
So awesome series on each vehicle build... Both the vehicles when bought were not operational... How do you approach if there is blow by on the engine?
If there’s excessive blow by, that means the motor is extremely worn… You’ll get maybe a little life out of it. If you’re able to bid or buy one that is running and no or very little blow by present is where you want to be.
Slant back? Only WITH A/C.
I had to have a Slantback! Waited and waited(almost 2 yrs), finally got one with a dead motor(didn't care cuz I'm doin a 12v anyway) $5500 SCORE!!!!!
Not bad at all!!
Hi there , loved your work . Finally mine got release and wondering where do you rent the trailer ? Thinking about haul trailer but it’s looks unsafe. Thanks
I’ve gotten some trailers from Sun Belt rentals before, the trailer I just got I found on Facebook, because I Couldn’t find one for rent that was wide enough through a company. A lot of companies out there have them though, just make sure they’re 82 inches wide between the wheel wells
👍👍👍👍👍👍
Interesante el video y te recomiendo usar w40 antes de sacar los pernos 😂👏👏👍
So now that your well past this, could you have disconnected the transmission wire from underneath before you separated?
Probably could’ve
GO SLANT BACK IT LOOKS BETTER
Slant bud!!!
You know there are some business with mobile trucks that will blast off rust and paint .with high presure water
Did I miss in your videos where you disconnected the diff/trans/port/etc vent tubing?
I think it’s in their somewhere
@@SplitBuilds Oops, just viewed it a couple videos subsequent to this one, "Humvee Rear Suspension Removal." Thanks!
Nice work?!
Please how can I buy spare parts of humvee and import it to Nigeria
I have no idea
What was your MOS Devil Dog? Dare I say Motor T?
0311
I’m starting to know my way around these Humvee’s! It’s my 4th one
@@SplitBuilds True Devil.. I was a Doc. Love your vids! Keep up the great work. I am in the process of buying a humvee myself.
She doesn’t look thrilled…lol
Slembak
Good lord thank god your wife help you or you never get it done
Anh ta là một người rất giỏi làm ô tô các bạn