Weebill S New Firmware 2.07 | Should You Update Your Weebill S Gimbal
Vložit
- čas přidán 6. 09. 2024
- Weebill S New Firmware 2.07. Should You Update Your Weebill S Gimbal A new Weebill s firmware is here. Zhiyun has released a new firmware update for the zhiyun Weebill s. The new zhiyun weebill s firmware 2.07, but you should update your Weebill s gimbal. Let's look at the zhiyun firmware update.
Newsletter The Gimbal Academy: geni.us/NtawyGA
My Weebill S series:
• Weebill S gimbal
Download all Weebill S Firmware versions:
geni.us/53Ky
Watch the baseplate video: • Best Quick Release Pla...
Ulanzi Weebill S Baseplate: geni.us/HESJk
Ulanzi falcam f38 Quick Release plate: geni.us/Aqlw
Go from beginner to GIMBAL PRO and learn all aspects of working with GIMBALS. Learn what the PROS don't show you on CZcams!
Join The Gimbal Academy: geni.us/lr6f4cE
Go from beginner to GIMBAL PRO and learn all aspects of working with GIMBALS. Learn what the PROS don't show you on CZcams!
Join The Gimbal Academy: geni.us/lr6f4cE
Gimbals & Accessories:
Gear I Use Right Now: geni.us/1CEY5i
The best Quick Release Plate: geni.us/Aqlw
Gimbal Side Handle: geni.us/LABApv
DJI RSC2: geni.us/AEsDUPa
DJI RS2: geni.us/xnCiN
Zhiyun Gimbals: geni.us/KcHF
Ulanzi Falcam f38: geni.us/YmdVD
Downloads:
DJI RS2 & RSC2 Settings & Checklist: geni.us/61q3deR
My Custom Gimbal Settings: geni.us/Weebil...
Weebill S Firmware: geni.us/53Ky
Creative Tools I Use:
Fulltime filmmaker Online Film School: geni.us/LkEcz
Course Creator Pro: geni.us/cSP89
CinemaGrade Color Grading: geni.us/sxZngwl
Luminar AI Photo Editing: geni.us/AQzi5
Artlist Music 2 Months Bonus: geni.us/eKqbrK4
Artgrid Unlimited Footage: geni.us/c22EOhu
TubeBuddy: www.Tubebuddy....
MorningFame: morningfa.me/i...
Lens Distortions SFX: geni.us/tU68
Motion VFX Templates: geni.us/zFBOeOW
Sell Online Products: geni.us/KPtK
Gear & Sponsors
Gimbal Accessories: geni.us/vk9gfks
Panasonic S1H Cinema Camera: geni.us/EV33Y9
Panasonic GH5: geni.us/XmTCnS
Favorite Lens: amzn.to/2NGRmak
DJI Mavic 2: geni.us/9NH1
Gimbal Of Choice: geni.us/AEsDUPa
Special Thanks To: www.focusnordi...
Panasonic Nordic: bit.ly/2EGsMk9
Subscribe To Peter Makholm: bit.ly/2Sk0EJw
Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or a service with the links that I provide, I may receive a small commission that will help support this channel, so I can keep creating content each week. There is no additional charge to you. Thank you for the support; it is highly appreciated.
Hi Peter, The deviation in roll is most obvious while moving and in a bend. Like in a car. On a few occasions I filmed someone in a car. The roll was really offset when the car turned. And that is the point they mentioned in de what new in 2.07: "1. Fixed issues that cause the roll axis to deviate when making a turn at a fast speed or moving horizontally." So I will certainly update.
In 2.07 update the manual focus sensitivity always sets itself back to low after turning it off,than on. Imleaving mine on 2.06 its better!
This issue has been driving me nuts but I talked to Zyhiyun support and discovered a workaround:
Start your gimbal, go to motor and do an auto tune, then change the motor sensitivity setting to whatever you like... NOW it will remember your setting. It's weird how that works but it works 😃
Hi,
"2. Fixed issues that cause manual focus and digital focus to work at the same time when setting digital focus with the handle." is indeed fixed. Problem was: if E-Focus was selected, the follow focus and e-focus were turning at the same time. Now it is as it should be.
But E-Focus is still not usable at all... the lens focus turns into any direction and jumps like crazy to any focus position when slowly turning the Weebill wheel.
Thanks for letting us know mate.
@@PeterMakholm But there is another new bug with Canon cameras on v2.07: when hitting Record on the gimbal while cam is connected with USB, camera will crash and needs battery pull. So the new firmware works just when not recording or when not using USB connection. v2.05 is without this bug.
My GIMBAL starts vibrating after 2 weeks of not using it with my sony a6400 and sigma 16mm 1.4. Earlier it was working well with no vibration issue. HELP HELP
I have experienced some real trouble trying to pair the gimbal, and got some events of sudden unpairing of the Canon EOS SL2 even during a steady shoot and specially when we put the gimbal to sleep or the camera to shut down or auto-off: update your firmware, this last one solved for good this issue.
this update does not save the settings of the follow focus and a b points when the gimbal is turned off
Thanks for the overview. Always come here when a new firmware is released. Hope they get that vortex fixed and make a solid release.
Thank you for the comparison Peter! I will go on then and update my Weebill S 😁🙏
Horizonally is when you are running next to someone one filming them from the side i am on older firmware and notice it filming running shot of someone cycling
I like these videos on firmware update of the weebill S. Always good.
Hi Peter
Thanks for all your sharing and in-depth testing. Your videos have been very helpful in my learning journey with this gimbal.
I just bought the Weebill S with firmware 2.03 installed. I'm using it with a Sony FX3. I have balanced the camera thoroughly and the first time I turned the gimbal on, it worked very well. However, I wasn't able to record using the included cable. So I thought I would update the firmware to the latest version (2.07 now) as the notes mentioned the FX3 was able to work with it. After update, the motors on the gimbal started to vibrate even when it is placed stationary on the table. And still not able to trigger the record. Could you share any insights you might have please?
Hello Alvin!
I'm also in use of this Gimbal and you can do this:
In the options of the camera, there will be a settings which is including "USB-Control-Mode: PC+Camera /+/ PC (only)" this is the very important setting that you have to make at first.
After that, you can go into the Camera-Option in the menue of the gimbal. This is strange, but - the days that I had the v2.03 running, I wasn't able to control my camera (Sony Alpha 6600) with any of the Sony-Options (Sony-USB; Sony), but ... the Camera-Option "PANASONIC" worked. (?! Don't ask why, just accept that.)
So, you can try every camera-option in the menue and have a try. However - it's more different, if you use the TransMount Image Transmission Transmitter!!!!
Only in case you use this too - the USB-Pot on the TransMount is with the little USB-Type C included, so you can also test, if the camera-control is functional, if you plug in your normal USB-C cable into this port.
Don't forget to choose "CCS" in the Camera-options, to make this option working.
At least - at v2.05 as well as 2.07 the problem with the record-button on the gimbal, was fixed and the "Sony" Camera-option is working since then. You can feel free to test the other options in this menue, because you can't demage anything on your hardware, it's just the way the devices are communicating with each other - so nothing more or less could happen, that the gimbal talks chinese, but the camera is still talking in english and don't understand a word - in figuratively speaking.
decrease the strength of the TILT engine that solves, put between 6 and 15
Appreciate you testing it all out! Thanks!
Nice, But I am getting the RSC2 today... But watched the video anyways... Thanks! My set up is pretty light with a Sony FX3 and Tamron 28-75 and Sony 20mm 1.8
Hi, are you able to trigger the record from the gimbal?
@@LeeSMM yes
Hi, anyone have a problem with Axis Lock? Perfectly balanced, work like 2 minutes and beep sound, Axis lock on display and stops working?
The Wheel sensivity is not saved, so each time you restart the gimbal you need to set this again, which is really annoying.
Hello Peter, for sony they gave parameters for newer models, but not for older once like A7iii 😑 idk what's prb with zhiyun for giving weebill s, sony parameters adjustment for all models.
I don't understand why the don't support all sony cameras. It does not make any sense.
@@PeterMakholm Yes I bought weebill S when it's launched and still waiting for that update. Peter if u can kindly speak about this in ur next video. Idk what's problem with weebill S and Sony
@@alexrichard6510 Here waiting for the same thing 1 year ago!! Please Peter comment on it in your next Weebill S update video
Thanks for the update video! which of your custom settings do you find work the best with this update? Thanks
Thanks for the weebil S videos! I see you shoot with Lumix. I'm loving my s5 so far. New sub. Keep up the good work sir
Hey peter..please help me out..my weebil s makes sudden pan movements when I am following a subject
稳定性确实提高了，特别是上下运动的颠簸晃动感。
hi pete, I'm still having problems even with this new update. The horizon will somehow tilt a few degrees off each time I pan the gimbal, sometimes it goes left, other right. Just dunno how to fix this! Any tips?
Did you get this resolved? I have this problem as well
@@daniel-ix nope, not resolved. Seems like I'm not getting any help herein as well. Wrote to Zhiyun, and they asked me to send a video to them.
Yes exactly the same here!!! Please tell me if you found a solution
Thanks for your video. I'm Brazilian and I can't configure my Weebill S to the slowest mode. I would like to smooth out the engine movements. Can you help me?
Hi can you help I got the weebil s I can't get the rec button to work on the a7r v if I press record on the weebill s don't work if I press to recall button on the camera and press the record button on the weebill s it will turn the rec off but it won't switch to recording on the camera from the weebill s
hi, i have this model and after many years i would to change to another models. Weebill 3s have better stabilization or i rest with this gimbal? Thanks
a basic question. why do you want to turn the handle on vortex mode?? i don't see the point here.
Hi. I do not want to turn the handle in vortex. But when you are moving with the gimbal you can’t hold it perfectly still and that is the problem with the vortex turning. if you turn the handle that will be noticeable in the footage.
The motors on my Weebill-S suddenly stopped working. The device itself turns on fine, but the motors won't engage. I've downgraded, nothing. I've upgraded again, still nothing. In the about>firmware menu it says v2.07 and ID:0000. When I search the web for people with a similar problem I find a handfull, but no one has found a sollution. Zhiyun says to send it in for repairs, which would cost me around the same amount of money of buying a new one. If it really is a hardware problem with the motors, I reckon Zhiyun is crap and I should have gone with DJI...
How do you think if i buy this gimbal in 2023 for my sony zv e10? And is it compatible with my camera?
skip this gimbal, shittiest gimbal ever made
good afternoon , please I have a question ,
I have Weebil s & Camera Cannon , Why Error 70 appears during connecting to Zhiyun Gimbal?
I updated my webill s firmware, it went crazy keeps vibrating. Before the update everything was ok What happened?
The same is happening here. A have to change the tilt motor force to 5.
2023 and still the vortex mode has not been fixed.
Anyone have issues with the gimbal turning on after this update? When I power on, the gimbal goes straight to sleep and says "upgraded ✅" getting frustrated.
No haven’t had that issue. Try to downgrade it and start over.
@@PeterMakholm how do I downgrade if it won't turn on? They want me to send it back. Should I?
What is your setup and how much do the parts weigh in metrics? Thx
Nice info. Are you doing a video on the Webill 2’s 1.85 firmware? Thanks.
Hi Peter. Hope you can help solve my issue with GH5. I no longer have ability to see/change f-stop, ISO etc. with gimbal. Wondering if it's camera firmware (2.7) or Weebill firmware that changed this functionality or if there's a setting I missed. Thanks
I bought this gimbal this week and upgraded to the 2.07 firmware version. I immediately found that the selfie mode did not work anymore (triple press POV button). I downgraded to 2.06, same problem. I downgraded to 2.05, same problem.
Then I downgraded to 1.99, and the problem was fixed. Seems any 2.xx version does not like selfie mode.
Selfie mode is triple click the front trigger
@@PeterMakholm Oh, I see. They did change that then, because it was POV button, and that's what it says in the manual.
I'd have to try that, I'm not sure if that's an improvement or not.
Hi Peter, great video as always but what are the motor settings for the weebil s with this new firmware?
My nikon z6 have an issue, block my camera and now don't work anymore from gimbal anythink. Not rec button no iso,tv and others. Do you have anyone the same problem or do you have a solution?
The same think for my canon SL3 with this update
This is pretty exciting I want to know is there an app that will give the update to this gimbal?
This reason is because the USB port on my gimbal is not working at the moment. I'm having to charge my battery separate is there a working app for this?
Awesome channel.. 🤘😎
We just a bought a used Weebil S and was wondering about updates.
Hello Peter, thank you for your video.
You are welcome mate.
thanks peter for news
Hello Peter. I have updated 2.07 The vortex with a speed of 20 or 100 moves me just as slowly. I do not understand why? You can help me?
Alright but do you have a walkthrough of how to update? Mine says connect it to BT and it will update then it does nothing.....
Yes i have. Watch my weebill s firmware 1.95 video.
Thank You! It was my first time updating since I got it a few weeks back. Kind of strange but I got it to work thanks!
@@thebokeheffect8831 I think I learned from watching that video of Peter's V. 1.95 myself, the other day!
@@JoeSzilagy yeah it’s kinda weird how you have to connect then exit. That’s the part it was losing me at.
bro help me please my gimbal shaking always even with normal settings and your custom. but when I using settings for motor tilt 25 its removing the shake almost. is it normal?? im using A7IV and sigma24-70
Hi first I want to said great work and I love your tutorials. I have a question I hope you be able to help me out. I have a weevbill s and it’s a little out level I calibrated and did everything I could but it doesn’t fix the problem. It’s there anyway way I can do it manually? Thanks
Thanks Peter. I have to ask a question, as I can't find an answer anywhere. When you put it in the 'Go' setting, do you have to hold the button down until you stop shooting? I think (on my little Crane M2, which I used before) that when I put it into 'Go' mode, it stayed, and I didn't have to hold the button down. Thanks in advance!
You can customize go button behavior to either click or hold in weebill s
I am lumix g85 user. Do anyone know whether weebill s can do at least to take a photo or video through these button controls ??
Hello, I would like to ask which update do you consider the best? How can I get the download versions of the site has zhyiun only the latest. Thank you and have a nice year!
Hello.
I am a subscriber of your channel. According to your review, I bought a Weebill S steadicam, during operation I noticed that the motors make a sound. The sound is like the rotation of motors, so hissing. Tell me it's ok
i own the Weebill S since good 2 Years and i was happy ( with Nikon Z7 ) but now since i sold my Z7 to get the Z9 its getting more difficult!
I can mount the Z9 to the Weebill S but the camera is to high so it can´t get balanced perfect! ( its headheavy now ) the motors are strong enough to handly the unbalanced weight but its no solution for long time use ! Any idea how to balance the Z9 correct oder do i have to buy another gibal for the Z9 and wich one do you recomment ! ?
How about counter weights? Zhiyun sells them
Hi, How can I configure with Sony Alpha a7 M iv with Zihyun weebill s ?
Hi sir object tracking is available in this version?
I am facing the first problem in both the updates
I've just got me a good working v2.02 gimbal, should I ulgrade to latest fw?
hi, when i setup the wheel mode to High in sensi, after i restart the gimbal it goes to normal mode again, how can i save the change? thanks
Auto tune first and then change the value. Then it should save it
@@PeterMakholm thank you for your reply , ill try it thanks
drive.google.com/file/d/1_Z8qniGIO7otXjxRJZig8I-MZ53-qFlL/view?usp=drivesdk
i have done the auto tune then i setup the wheel mode, & it goes to normal again 😔😅
Thanks Peter . . .
Waiting for the update to record from the gimbal with sony a7iii !! :(
Hi. I can assure you that the a7iii (a7M3) works with willbee s. My gimbal came with FW 2.05. Make sure to turn the USB Connection to "PC Remote" on your Sony cam or it will not work. And do not forget to turn off the "Ctrl with Smartphone" on your sony camera. You will find this setting on your Sony cam under menu/Network1/page1. Then use the supplied micro USB to USB-C cable. In the Zhiyun menu under settings/camera you will find two settings "sony" and "sony-usb". Choose settings/camera /sony-usb/s7iii. Then you will be able to record, change aperture and control the shutter speed, iso and whitebalance. I hope it helps.
Thank you bro
Always.
Hey , when i take panorama with my weebil s , when it takes the last shot it moves to the starring point in the middle of shot no matter what the shutter speed is do u know about thay issue
Hi, No I haven't heard about that problem before. I will try to test it to see what happens. what firmware did you use.
It happens with all firmwares , with zy play app and without too , when u set te a and b point , it will move to point A at the middle of last shot , so it becomes blurry ,
But i havent tested it on v 2.06 and 2.07 , i hope it gets fixed
I have the Sony a7iv and for some reason I can’t get the record button to work on the gimbal, I’m using the usbc cable on 2.07 firmware everything else seems to be working just not the record button any ideas why or how to fix?
Same problem with A7R2.
I have a solutioin. Use the "USB to micro USB" cable instead of the "Multi USB" and choose Sony A7SIII in the camera configration. It work you have acces to ISO,AV TV EV setting directly with the weebill.
Como lo actualizas?
Only thing I was looking forward to was the addition of Portrait Mode, guess I’ll have to sell my Weebill S and get the M3 for that. 😕
check the reviews from users. m3 has burn in screen, difficulties to balance, does not work with the 28-75 lenses, cables are too short, a7c cannot be controlled. i would do a pass on m3 if i was you.
@@CC-gt3ro I already got it, have balanced the 17-28mm, 35mm f1.8 and the 85mm f1.8. I don’t own the 28-75mm and have not connected the A7c to it because typically don’t control it with the gimbal (mainly a habit from previous camera that was not supported). I haven’t had the other issues you list
@@9adriano21 plenty of persons have confirm the burn in screen with the crane m3. I read a lot of reviews from germany, and other countries. It just a question of time. Also oled screen in general doesn’t like direct sunlight. If one icon stays on the screen, the display will keep the trace of it. For example the battery charge icon. Apparently there is no pixel shifter tech, or screen saver. It is generic to all oled display. There is no exception. Your screen will have the defect if you keep the screen identical for a long period of time. They should switch off the sceen after 2 or 3 seconds. I have an oled vr headset, it is still ok because my image always change, and i don’t have an application that keep the same text at the same location. But on a gimbal, using oled screen is not a good idea.
Is inverted mode now possible with this new firmware? What you said along time ago it only can with the 1.95 firmware or is it now possible with the 2.07 one? I think it is possible but the reaction time is slower then in normal mode so idk if that is normal but..
I mean inverted mode is the same as using the gimbal upside down.
?
Hej Peter, har du workshops i cph? Eller kun online? Hilsen Christian
Can we use Weebill S with Sony A7IV?
Yes. No problem
hahaha theres no way you can see the "deviate" by looking at the cam and gimbal, you should have look at your footage
👍
you talk too much