IOT Project Using NodeMCU ESP8266 And network with Blynk App 2.0 | Home Automation 2022 | part 5
Vložit
- čas přidán 5. 03. 2022
- Home Automation using NodeMCU ESP8266 and Blynk 2.0 Using step by step.
1. Making your first project on
New Blynk 2.0
2. Home Automation
3. Internet of Things 2022
4. Blynk 2.0 setup
5. ESP8266 NodeMCU Driver
Installation
This channel to share exciting videos of Arduino projects,Electronics and electrical easy diy projects to share with you I hope this projects will be helpful for you to create something new .
Do not Forget to like comment and subscribe my channel.
SUBSCRIBE LINK:-
/ @slideas1
Arduino Code :-
www.mediafire.com/folder/det7...
CP210x Drivers & Board manager txt :-
www.mediafire.com/file/578hyt...
CP210x Drivers zip :-
www.mediafire.com/file/bq82nm...
Full Package :-
www.mediafire.com/folder/2skn...
My Other videos :-
1. Home Automation using arduino ir remote control sensor
• Home Automation using ...
2. How to make bike & car security system using arduino gsm module
• How to make bike & car...
3. LED chaser arduino mega with 32 effects | 53 leds
• LED chaser arduino meg...
4. Top arduino projects 2021 for covid 19 | coronavirus protector | Sterilize Stationery
• Top arduino projects 2...
5. NEMA 23 | NEMA 17 | NEMA 34 with TB6600 stepper motor driver and Arduino
• NEMA 23 | NEMA 17 | NE...
6. Arduino Target Following & Recoding Robot.
• Arduino Target Followi...
7. How to use W1219 Temperature controller/DUAL Display
• How to use W1219 Tempe...
8. How to make an LED VU-meter using Arduino.
• How to make an LED VU-...
9. LED chaser with 32 effects |led patterns with Arduino | Code in Discription
• LED chaser with 32 eff...
10. How To Make Automatic Touch Less Non Contact Water Tap At Home/office
• How To Make Automatic ...
11. How to make best car reverse parking alert system using arduino / DIY / arduino projects
• How to make best car r...
#Home_Automation #ESP8266_NodeMCU #iot_2022 - Věda a technologie
are the 230V AC comes fro the 3pin socket ? if yes how do you connect the live and neutal wire to the socket tq
Relay doesn't turn off. Any solution?
nice bro
Thank u bro
Code is not working to me why..... I did same as you did
Nice work
Hope i can ask questions
If can, here is the question
Should the nodemcu power down and reboot again will the light go to previous state before nodemcu power off
Thank u...
Answer When the power is turned off and restarted, the node mcu returns to its original state..not a privios...
@@slideas1 hi thanks for the answer
Any workarounds for this matters