Hermosísimo y exelente trabajo. FELICIDADES.¿Que pegamento usas para fijar la fibra de vidrio?me encantaría que hicieras un tutorial más detallado de la construcción, con planos puesta de la electrónica. También sería sensacional ver el vuelo ignaural. Nuevamente felicidades yucho éxito. Saludos desde San Francisco de Campeche, en el sureste de la República Mexicana.
To cover the plane I use 25g/m2 glass fiber, normally epoxy resin is used to harden, but I am using a mixture of white glue and 50% acrylic paint because it is much less heavy, the result has been 436g such and as seen in the final images of the video. For the cabin 6 layers of 110gr / m2 and epoxy resin. (Weight included in the 436gr.)
Buen trabajo. Me podría decir que clase de fibra de vidrio es, si tiene algún nombre y donde se consigue, es que no encuentro esta fibra tan fina, parece plastico. Muchas gracias.
Gracias por tu comentario, es fibra de vidrio de 25gr/m2, lo puedes encontrar en tiendas de aeromodelsmo: hobbyking.com/en_us/glass-fiber-cloth-4000x900mm-18g-m2.html?affiliate_code=OEXYOCOFSMYGLKT&_asc=9894889423
Я покрыл его стеклотканью 25 гр/м2. В этой модели я не использовал эпоксидную смолу. Я провел эксперимент с акриловой краской и клеем ПВА (тот, который используют плотники) на 50%. Положительный результат: значительно легче наносится и меньше конечный вес. Отрицательный результат: прохождение гвоздя оставляет след, хотя общая жесткость приемлема. Andorra
My process is as follows, 1. I paint on the polystyrene with a mixture of acrylic paint and white glue at 50% (we'll call it the mixture). 2. I cover the imperfections and joints with softwood putty. 3. I sand the putty being careful not to remove the mixture. Any excess putty must be removed as it will increase in volume when painted. 4. I always paint again with a roller and cover with 25 g/m2 fibreglass. 5. I paint again with a roller using the mixture. 6. If the putty has absorbed too much paint. A sanding with waterproof sandpaper will even out the surface. 7. Finish paint with the chosen colour. This is much easier than using epoxy, it gives more time for the fibreglass to set. Cleaning can be done with water. And the final weight of the plane is much less. It does not reach the hardness of epoxy, but with less weight the flight is more stable.
Bonsoir, je n'ai pas trouvé le plan à l'échelle 1:1 de l'aménagement intérieur en contreplaqué (support accu, servos ...) ? Il s'agit de la page 29 ( échelle 1:3). Merci
![A6M3 ZERO RESTORATION PROJECT BY "LEGEND FLYERS" [A Tour With Dan Hammer At Paine Field, Washington]](http://i.ytimg.com/vi/-3vo-b21wKc/mqdefault.jpg)
En polystyrène ou en depron c'est du boulot quand meme !!! Vivement le premier vol 👍🛩🛩🛩
nice build :D
Geniale
Hermosísimo y exelente trabajo. FELICIDADES.¿Que pegamento usas para fijar la fibra de vidrio?me encantaría que hicieras un tutorial más detallado de la construcción, con planos puesta de la electrónica. También sería sensacional ver el vuelo ignaural. Nuevamente felicidades yucho éxito. Saludos desde San Francisco de Campeche, en el sureste de la República Mexicana.
Ehh mira donde te vengo a encontrar! jeje
Muy bueno este Zero...
Sir Can u please tell me what is the transparent thing you used for covering the plane?
To cover the plane I use 25g/m2 glass fiber, normally epoxy resin is used to harden, but I am using a mixture of white glue and 50% acrylic paint because it is much less heavy, the result has been 436g such and as seen in the final images of the video.
For the cabin 6 layers of 110gr / m2 and epoxy resin. (Weight included in the 436gr.)
Buen trabajo. Me podría decir que clase de fibra de vidrio es, si tiene algún nombre y donde se consigue, es que no encuentro esta fibra tan fina, parece plastico. Muchas gracias.
Gracias por tu comentario, es fibra de vidrio de 25gr/m2, lo puedes encontrar en tiendas de aeromodelsmo: hobbyking.com/en_us/glass-fiber-cloth-4000x900mm-18g-m2.html?affiliate_code=OEXYOCOFSMYGLKT&_asc=9894889423
Молодчинка!!! Отличный самолет!!! Не понятно чем обтянут, эпоксидная смола и стеклоткань? Украина.
Я покрыл его стеклотканью 25 гр/м2.
В этой модели я не использовал эпоксидную смолу. Я провел эксперимент с акриловой краской и клеем ПВА (тот, который используют плотники) на 50%.
Положительный результат: значительно легче наносится и меньше конечный вес.
Отрицательный результат: прохождение гвоздя оставляет след, хотя общая жесткость приемлема. Andorra
Please make Bf 109
can white glue on fiber glass be used as a glue or hardener?
My process is as follows,
1. I paint on the polystyrene with a mixture of acrylic paint and white glue at 50% (we'll call it the mixture).
2. I cover the imperfections and joints with softwood putty.
3. I sand the putty being careful not to remove the mixture. Any excess putty must be removed as it will increase in volume when painted.
4. I always paint again with a roller and cover with 25 g/m2 fibreglass.
5. I paint again with a roller using the mixture.
6. If the putty has absorbed too much paint. A sanding with waterproof sandpaper will even out the surface.
7. Finish paint with the chosen colour.
This is much easier than using epoxy, it gives more time for the fibreglass to set.
Cleaning can be done with water.
And the final weight of the plane is much less.
It does not reach the hardness of epoxy, but with less weight the flight is more stable.
@@DepronRCplans what motor did you use in rc and how many volts?
@@kenmiciano811 For this plane the best is a G-46.
Required;
60A ESC
4S~5S Li-Po / 12 ~ 16-cell Ni-MH/Ni-Cd
12x8 ~ 14x10 prop
bit.ly/3t48oAc
Bonsoir, je n'ai pas trouvé le plan à l'échelle 1:1 de l'aménagement intérieur en contreplaqué (support accu, servos ...) ? Il s'agit de la page 29 ( échelle 1:3). Merci
Merci de votre collaboration.
J'ai mis à jour le plan, vous le trouverez entre la page 32 et 35.
@@DepronRCplans Génial ! un grand merci à vous !!! vous me facilitez le travail 👍👍👍
hi do you have the password for the plans as i wish to make this plane thank you
drive.google.com/file/d/1DIyGElH5zQpOEWOgfDmMPS8yUA4xBOnZ/view?usp=sharing
Please made this type of F-16
You propose me a good project that I will have to consider for the next months.
@@DepronRCplans to wait for your consideration of the F-16