NEW 3D Printed RC Hot Rod Bodies, Engines, and Accessories from NightCrawlers3D
Vložit
- čas přidán 15. 02. 2017
- Be sure to check out my Amazon Influencer page here: amzn.to/2U12C2l
I will be adding items to my store all the time and all proceeds go right back into the channel!
My friend at nightcrawlers3D sent me a huge package of scale goodness. Check him out on facebook and instagram if you see something you like.
profile.php?...
nightcrawle... - Auta a dopravní prostředky
these rat rods are awesome
DANNNNNNNGGGGGGGGG! Thumbs up from me.. Wikked setup. Subscribed and Noti-Squad
RCSparks Studio Cool that the bigger guy still looks at the little guys
Need some old WW2: aluminum bombers seats with the rivet's and either 5 or 10 point harnesses 👍
thanks for your comments on my Flat Head V8 Design!
sedans are 110 and truck cabs are 100! looks awesome man glad you like it :)!
Sweet goodies I got one of the 32 Vicky bodys from him after seeing yours pretty nice stuff I'm saving up to get a few more bodys from him not sure what I'm going to do with Vicky body just something told me I had to have for stock and I'm very glad I did even if I trade it off,,, nice work to my RC friend...
Your friend is doing awesome stuff with the 3d printer. Really nice.
great 3D print !
Very nice Rat Rod Garage
that truck is sweet
man thats sick ! this is way i got into 3d printing ! model car world will never be the same lol
that truck would look sweet with some diesel stacks
Your Killin it on those Rat Rod Builds, Lookin Bad Azz
i do respect him i am not trying be a dick i really like what he is doing i hope nobody takes me the wrong way i love rc and i do have many changes going on with my rc fun i am really with you guys
Great Haul Awesome Vid
very cool man. the new body looks awesome . a good cpntact and friwnd can be better than money.. grest haul.. thanks for sharing...👍👍☺
Wow insane i absolutely love it all
Toys rule!
You have some amazing things going on over there. Love what your doing. 👍🏻👍🏻👍🏻👍🏻
Looks very good man
That's really awesome! It's neat to see the whole body 3D printed! Sweet stuff and look forward to seeing more! Thumbs up bro!
Really nice quality, I definitely have to check this guy out.Thanks for sharing. I think you need your own 3d printer 😁
great job!
Thanks. I'm old school hot rodder. Been looking for bods etc to build. I just went to their site. YUP gonna order something. I just got a couple V8 s. itchin to build. Thanks again.
Hate to say it but I will. The header is missing one more pipe to go into the collector. Dude that is really awesome you two get to work together. Been designing parts for Losi MRC Pro, MRC and Vaterra Slickrock with SketchUp Make. #2 is almost done. :) Great stuff bud. Love your channel and your work. :)
The flathead Ford 2 center cylinders share 1 exhaust port on each side. Had to be terrible for flow. Lol.
Oh yeah thats right. Sorry my bad. Thank you for correcting me. :)
All good buddy. I had to double check myself. Hadn't seen a flathead in a long time.
Awesome bud. Me too. I get a little shady anything pre 60's. Good catch on that. Your a good cat. :)
on #2 you need to use ice cream sticks for a wood bed I think it would look nice and on the new truck that you got today put some varnish on the sticks my opinion it should look nice
I had the same thought and tried it. But they didn't not sit low enough from the bed rails. Plus I like to see my framework. Lol
i cant wait to see one of beasts run that your building i think there bad ass rides i know it takes time i have 2 builds going on the trail finder 2 just redoing it two a 3 link and 4 link i know its not scale but dont care it should be
NICE
I'd love to see you make a rat rod tandem drive axle semi with that new grey cab.
Nice!
shenlonco ghcgg
Its My V8 Flat Head Engine Model Design which is part of the hotrod on thingiverse , search hotrod, did you know this ?
What material are the bodies printed in? Would they hold up to rollovers and crashes and stuff?
These were PLA prints, some later ones were ABS. PLA will warp in direct heat like in your car in the summer. ABS is a bit more durable but it all really comes down to the design and how much structure it has that makes it strong with rollovers.
Wow that is awesome I love the built me a rat rod but I wouldn't know what to do about a frame, do you sell frames Love your channel you do awesome work
Nice new subscriber
you should see if he can try and make a 1973-1979 ford f150-f350 I would buy that in a heartbeat
Hey, regarding placing a servo in the motor, if you reply with your sizes of the servo to locate inside the block I can model something up!
very cool
He’s not still doing these, is he? I tried getting ahold of him on Facebook. Didn’t ever hear back.
No. Unfortunately he quit a couple years ago
love the bodies! and love the vids man, i build all my stuff too! quick question. how long is the new truck from the grill to the end of the bedsides?
It is roughly 16 inches end to end.
do you make these hot rods from scratch? they're badass!
Yes sir, have full build videos here on the channel
RC Everyday that awesome, in going to try making one someday, I love hot rods
those headlamps on the far right, are those RAM aluminum spot lamps? Real nice looking, The RAMs are 1" dia, wish I could find some machined ones that are like 3/4" in dia
those lights are from a poscher 1/8 scale model of like a bugatti I think.
are they plastic? either way great innovative builds, i love them, thanks for sharing the new products and ideas
They are Cast steel with glass lens. Poscher makes very high end model kits in 1/8 scale. Like several thousand dollar kits. I ran across the headlights and blinkers on ebay used for around $35. Thought Id try them.
Hmmn I need to search for them as well, because they are for scale still models, they would be very detailed. thanks!
What's up with the Yellow one on the lift? That just what am looking for.
czcams.com/video/Pve5X61MbWc/video.html
All the info on it here
flat head 6?
The flathead Ford 2 center cylinders share 1 exhaust port on each side. Had to be terrible for flow.
great work I subbed here and contacted you and nightcrawler3d on facebook keep up the great work
what are the rims in the vud
Rc4wd 1.55 landies
What kind of 3d printer do you use
My friend at Nightcrawlers3D does the printing, you can find him on instagram.
RC Everyday thank you sir nice builds by the way
I just looked for NightCrawlers3D on You Tube and couldn't find him .Does he have a You Tube Channel ?? I have something he might be able to do for me . A 1964 Dodge D100 Long Wheel Base .1/10th
Try him on instagram at nightcrawlers3d or on facebook hes Mick Gould.
Thank you
vid
That's a v6 not a v8 model engine.
The flathead Ford 2 center cylinders share 1 exhaust port on each side. Had to be terrible for flow
ooooooooooohh. yeah that makes sense now lol
liked shared love your stuff check out my newst vid trying to be like you lol just poorman way lol great stuff man
great job !!!