Waterproofing of the Mantis Kaabo electric scooter in Ukraine

Sdílet
Vložit
  • čas přidán 21. 04. 2020
  • At the request of our customers, we recorded the first video on the waterproofing of the electric scooter Mantis from Kaabo. They tried to show as much as possible all the nuances of this work so that you can do it yourself, or you can order this service from us (we provide a report by agreement).
    Characteristics of this scooter: 60V 17.5Ah 1000W * 2
  • Auta a dopravní prostředky

Komentáře • 41

  • @user-wr3bz2in8j
    @user-wr3bz2in8j Před 6 měsíci

    Спасибо, очень кстати.

  • @valentinaforever1333
    @valentinaforever1333 Před 4 lety +1

    Будет кстати, спасибо...

  • @christophe5076
    @christophe5076 Před 4 lety +1

    Thanks !!!!!!

  • @tukan20111
    @tukan20111 Před 2 měsíci

    На последних ревизиях kaabo уже водозащита с завода ,ipx5 как минимум.

  • @PSTRIPPLEE
    @PSTRIPPLEE Před 3 lety +1

    Whats the point of these silicon when i have tested 2020 mantis pro in rain. no issues at all

    • @mondemamon929
      @mondemamon929 Před rokem

      Kinda late but do you still often use it? Are there any issues to the scooter?

  • @epicmoments9944
    @epicmoments9944 Před 25 dny

    а вторую сторону обмоток кто будет лачить?

  • @MFSGamePlay
    @MFSGamePlay Před 4 lety +1

    I wish you can do this to my scooter? But I live in the states. :(

  • @TheChazas
    @TheChazas Před 4 lety

    What about drainage holes? for letting out condensate.

    • @emoto_ua
      @emoto_ua  Před 4 lety

      Air enters the wheel through the bearing. we advise you to drop into the water to the middle of the wheel, otherwise water will get through the bearing...
      Inside the scooter, condensation forms at subzero temperatures. the lower the temperature, the more condensate. At -5 you can ride, there will be a little condensation, which will not harm the scooter 👌

  • @TheChazas
    @TheChazas Před 4 lety +2

    What are you using to clean, coat and waterproof those motor magnets?

    • @emoto_ua
      @emoto_ua  Před 4 lety +1

      Clean the surface with anti-silicone . It is intended for degreasing and cleaning the surface of various contaminants, fats, oils, resins, tar, silicones. The use of anti-silicone allows you to avoid side effects when applying coatings.

    • @TheChazas
      @TheChazas Před 4 lety +2

      @@emoto_ua and what you used/sprayed afterwards?

    • @emoto_ua
      @emoto_ua  Před 4 lety +2

      @@TheChazas URETHAN 71 - a protective varnish based on urethane, to protect surfaces from moisture and mechanical stress

    • @TheChazas
      @TheChazas Před 4 lety +1

      @@emoto_ua thank you.

  • @andreimoraru2242
    @andreimoraru2242 Před 4 lety

    Отличный самокат и видео показывает очень хорошо как герметизация делается. Спасибо большое!
    В Молдове, Кишинёв, можно сделать доставку?

    • @emoto_ua
      @emoto_ua  Před 4 lety

      Спасибо😊 можно доставить после карантина👌 напишите нам в соц сети, подберем модель и характеристики 🛴

    • @andreimoraru2242
      @andreimoraru2242 Před 4 lety

      @@emoto_ua пожалуйста проверьте Телеграм

  • @leonoff48
    @leonoff48 Před 4 lety

    Подшипники с рычагах у него есть? Или на втулках?

    • @emoto_ua
      @emoto_ua  Před 4 lety

      На подшипниках и сальниках

  • @user-zv3np9rp7t
    @user-zv3np9rp7t Před 3 lety

    Какая стоимость данной услуги?

    • @emoto_ua
      @emoto_ua  Před 3 lety

      Здравствуйте, все индивидуально. Напишите или позвоните +380508250225

  • @pashagatin
    @pashagatin Před 3 lety

    Интересно А зачем в дождь ездить на самокате? Может быть когда дождь на нём ездить этой некомфортно

    • @emoto_ua
      @emoto_ua  Před 3 lety

      Бывают непредвиденные погодные условия ...

  • @THE-0NE
    @THE-0NE Před 3 lety

    Наглядное пособие, как не нужно делать гидроизоляцию. После таких горе сервисов, все переделываем и мучаемся, вспоминая из не добрым словом.

    • @emoto_ua
      @emoto_ua  Před 3 lety

      Так сделайте лучше и покажите...

  • @epicmoments9944
    @epicmoments9944 Před 25 dny

    два аборигена первый раз держат в руках мк

  • @tt.customs.electricscooter198

    Ну как же вы делаете даже крышку не сняли.

  • @whitexblacks1717
    @whitexblacks1717 Před 3 lety +2

    Абсолютно бесполезная гидра, моторы если лачите, то лачили бы с 2-х сторон, контроллер так вообще даже плату не вынули! Вообщем не о чем

    • @emoto_ua
      @emoto_ua  Před 3 lety

      Спасибо за ваш комметарий, ждем от вас полезную гидроизоляцию и подробную инструкцию ...

    • @RemontKvartir39
      @RemontKvartir39 Před 2 lety

      поэтому многие делают сами, либо вообще не делают, тк прямые и ответственные руки, доделывающие до конца, найти сложно

    • @whitexblacks1717
      @whitexblacks1717 Před 2 lety

      @@emoto_ua я для себя сделал, что мне ее демонстрировать. А инструкция бональна делайте как для себя.

    • @emoto_ua
      @emoto_ua  Před 2 lety

      @@whitexblacks1717 плата в этом самокате лаком покрыта изначально хорошо, если покрыть дополнительно она плохо будет остывать и может перегреватся и выйти из строя

    • @whitexblacks1717
      @whitexblacks1717 Před 2 lety

      @@emoto_ua" што" за бред вы несете. Цапон лак и подобные, уж тем более лак для плат имеют отличную теплопроводность. И греются транзисторы, они прикручены к радиатору, каким образом они станут хуже отводить тепло?

  • @user-uh7gc2lu2q
    @user-uh7gc2lu2q Před 4 lety +1

    Дикари....ктож сан техническим герметиком..силиконом мажет .....жээсть

    • @emoto_ua
      @emoto_ua  Před 4 lety +1

      Уважаемый, вы наверное что-то путаете...

    • @VetaL_ShapiK
      @VetaL_ShapiK Před 4 lety +1

      Это универсальный герметик Ceresit CS 24.
      Назначение: для металла, для пластика, для керамики, для стекла, для бетона, для окон, для герметизации.
      Температура эксплуатации: -40…+120 °C...