Video není dostupné.
Omlouváme se.
How to draw a Site Plan of building in AutoCAD || Building #2 || Making Civil Site Plan
Vložit
- čas přidán 22. 05. 2018
- Please Like, Share, & Subscribe for more.
PlayList : Complete Building Drawing in AutoCAD || Building #2
• Complete Building Draw...
This play list will cover the below videos
1. How to draw a Site Plan of building in AutoCAD
2. How to draw Floor Plan of a Building in AutoCAD
3. How to draw Floor Plan of a Multi Storey Building & Add BLOCKS using Design Center
4. How to provide columns in building drawing AutoCAD
5. How to draw Front Elevation of Multi-Storey Building in AutoCAD
6. How to draw Sectional Elevation of a Building AutoCAD
7. How to Draw Footing Foundation Of Wall in AutoCAD
8. How to calculate number of Rise and Treads of Staircase
9. How to draw Sectional Elevation Of Staircase in AutoCAD
10. How to draw RCC Column Layout Plan in AutoCAD
11. How to draw BEAM Layout Plan of a Building in AutoCAD
12. How to draw Rear Elevation of a Multi-Storey Building in AutoCAD
13. How to draw East Side Elevation of a Multi Storey Building in AutoCAD
14. How to draw West Side Elevation of a Multi-Storey Building in AutoCAD
15. SUBMISSION Drawing of Building
Follow Us On
Twitter : / civiltutorials
Facebook : / civilengtutorials
#CivilEngineeringTutorials
#CivilTutorials
#AutoCADTutorials
PlayList : Complete Building Drawing in AutoCAD || Building #2
czcams.com/play/PLGstbEuPUsWXn3Q9wZQhm8gPQ5RwtptAV.html
please make video about electrical layout for a building
Please for your email address
Civilengtutorials@gmail.com
Thanks.very well explained so it did help me a lot on understanding
Bravo... We are expecting more this kind of videos with simplified explanation...:)
you are doing good. i was searching good you tube channel for learning civil cad. then i found your channel. thanks for helping us who want to learn. thanks a alot. god bless you
Most Welcome and Thanks a lot Amit for the kind words.
Very well explained.
Thank you for teaching,.
welcome
Super mam
You are a Great .....Tutor
thanks
Most welcome
I loved your methade
Thanks Bilal.
Interesting tutorials
Than for your autocad tutorial video. So thank....
Most Welcome.
nice
Helpfully video
Thanks for watching.
Good helpfully video
Thanks
Very nice indeed....!!!!
Thanks Muneer
very nice work mam ,great . your videos are very much helpful to us . mam please make a video on column section details ..
Thanks.
Please go through the below link. This has complete design for the same building.
PlayList : Complete Building Drawing in AutoCAD || Building #2
czcams.com/users/playlist?list...
This play list will cover the below videos
1. How to draw a Site Plan of building in AutoCAD
2. How to draw a Floor Plan of a Building in AutoCAD
3. How to draw Floor Plan of a Multi Storey Building & Add BLOCKS using Design Center
4. How to provide columns in building drawing AutoCAD
5. How to draw Front Elevation of Multi-Storey Building in AutoCAD
6. How to draw Sectional Elevation of a Building AutoCAD
7. How to Draw Footing Foundation Of Wall in AutoCAD
8. How to calculate number of Rise and Treads of Staircase
9. How to draw Sectional Elevation Of Staircase in AutoCAD
10. How to draw RCC Column Layout Plan in AutoCAD
11. How to draw BEAM Layout Plan in AutoCAD
You are doing great job ma'am thankyou so much
So nice of you
mem your videos are awesome ...plz make a video base on annotative and standard dimension with scale point of view tnq
Welcome and thanks. Sure, video will be prepared soon.
Amazing work mam
Thanks a lot
Good work
thanks
good work,😁
Thanks
Nice explanation mam
Thanks Jayalakshmi
Great videos mam
Thanks
Thanks
Welcome Abbas
Very important vedio
Thanks Khan
Good Morninng
Mam, teaching is nice.
Pl make slab structural drawing by AutoCAD.
Kumar
Sure. Thanks for watching.
can u please let me know which r the code books should I refer to know more about the building laws about every type of building?
National building code
WOW
Thanks
Hey sister...your video tutorials are amazing...i am looking for method of layout...please provide
thanks.will be provided soon.
meantime you can go through other videos in the channel.
CIVIL Engineering Tutorials sister not that one of autocad...layout of building on site...ok
That also will be provided soon.
After changing the scale, why u overwrite the dimensions like that ?
U can change the factor of 'DIMLFAC' and re dimensioned them. Then we could also learn a new command and it will help us.
🙏🙏🙏
Thanks
How to set scale in auto cad before drawing.. kindly discuss..
basement ka plan kaise banate hai basement ke liye kya rool follow krna hota hai mam bataye please
would u plz make a video on the beams n column detailing showing the reinforcement
Sure
Pls can you develop one earth dam or haffir dam with everything like pan area silt trap fencing water tanks and water troughs ..also pipelines hope you will consider my request my best instructor
It could be helpful if you first start by setting your units
how to hide the 3D command in Autocad commad panel can u help me like .I type the command line(LI) but actually suggestion panel shows me many command in show i have to wrote full command LINE
please provides videos on how to make door schedule and electrical plan of floor and 3d elevation
Ok Ashish.
mam draw a key plan on a building . and if I lost my drawing in AutoCAD work place how to i recover ??
Sure Prodip. Thanks for Watching.
Rename the backup file to .dwg.
Maim submission drawing me meter mm me drawing show krte h ya feet inch me
Explain elevation of apartment and floor plan and sectional view
Hi Sunil,
Please go through the playlist. I guess all your required videos are already provided.
czcams.com/play/PLGstbEuPUsWXn3Q9wZQhm8gPQ5RwtptAV.html
Thanks for watching.
How can we made elevation of any plan
How to reduce scale 1:8 to 1:1000 site plan?
How to draw key plan in Autocadd . please tell me mam...
Ok Akshey. Key Plan video will be provided.
If your playlist's videos were numbered it would be helpful to understand,,,
This play list will cover the below videos
1. How to draw a Site Plan of building in AutoCAD
2. How to draw Floor Plan of a Building in AutoCAD
3. How to draw Floor Plan of a Multi Storey Building & Add BLOCKS using Design Center
4. How to provide columns in building drawing AutoCAD
5. How to draw Front Elevation of Multi-Storey Building in AutoCAD
6. How to draw Sectional Elevation of a Building AutoCAD
7. How to Draw Footing Foundation Of Wall in AutoCAD
8. How to calculate number of Rise and Treads of Staircase
9. How to draw Sectional Elevation Of Staircase in AutoCAD
10. How to draw RCC Column Layout Plan in AutoCAD
11. How to draw BEAM Layout Plan of a Building in AutoCAD
12. How to draw Rear Elevation of a Multi-Storey Building in AutoCAD
13. How to draw East Side Elevation of a Multi Storey Building in AutoCAD
14. How to draw West Side Elevation of a Multi-Storey Building in AutoCAD
PlayList : Complete Building Drawing in AutoCAD || Building #2
czcams.com/play/PLGstbEuPUsWXn3Q9wZQhm8gPQ5RwtptAV.html
thanks a lot for give this list...
Can we have a pdf of this
Mam i have a doubt
First offall y did u do scaling in taking ratio ?
mam terrace plan ka video banaye staircase with delails
Added int the priority list.
Please Like, Share and Subscribe for more.
How to draw Center line plan
Mam can you create a reflected ceiling plan for this building?
sure. thanks for watching
+CIVIL Engineering Tutorials thanks mam
how to construct the location of site plan
Make vedios on sap2000
Please make the dimensions in mm or cm instead of ft .. thanks I hope you will consider my request
Mean use mm or cm that best thanks for your hardworking
@@nimankosar2985 Yeah that can really be helpful because the feet is somehow hard to set
How plot full building drawing in A1 paper and print
A small video will be provided soon.
please make a video of column details
Sure. Its on the way. Thanks for watching.
welcome and thanks for this video
please how draw road in site plan, make a video
Ok Deepa.
Mam can I get complete building AutoCAD file
Good afternoon madam
Mam can you please show. A plan of building
PlayList: AutoCAD Basics with Commands
czcams.com/video/M3WeveQYyJs/video.html
Please provide blister pack layout
Sure Vani. I will upload soon. thanks for watching.
How to construct the road you have not shown in the video and you're videos are good but when a new learner is doing it is quite tough for them because you are not giving the detail explanation of every single thing
Hi Piya,
You are absolutely correct. The problem is all things could not be shown in one video. That's why created playlist.
czcams.com/play/PLGstbEuPUsWXn3Q9wZQhm8gPQ5RwtptAV.html
The playlist will cover all things required for a building. If you want road construction video, you can request in comment section. It will be provided with priority basis. Suggest you to watch the basic commands video in the below playlist.
And please try to watch all videos in the playlist and suggest what extra videos you need.
czcams.com/video/M3WeveQYyJs/video.html
Thanks for watching and the suggestion. Please like and subscribe for more videos.
There are multiple playlist in the channel which you can find in the channel home page.
Please go through the playlists and provide your valuable comments.
can I get pdf of this Drawing
Ye Saurabh.. Please hit on Thanks button available below vide, share the screenshot with civilengtutorials@gmail.com and receive the pdf file in your email.
Nice effort ....but don't copy
Plz mam wanted this DWG file mam
6:10
?
mam you might made mistake in site key plan ratio 1:20 it becomes ratio of factor is 0.5 please check
maam am not understand the scale factor pls can you explian it
1:1 1:20,1:50
wht is that all
plsss help me
On site One feet is equal to one feet or 1 meter is equal to 1 meter. This drawing is at a scale of 1:8, means 1 unit in the drawing is equal to 8 units in field or site. The drawing is 8 times smaller than real field scale 1:1.
AutoCAD #6 - How to Scale a Drawing in AutoCAD | AutoCAD Basicsczcams.com/video/ta5gV7966NA/video.html
@@CIVILEngineeringTutorials but mam why did you divided it by 0.4 can you pls tell me how 1:20 scale factor becomes 0.4
Mam why it has to be reduce
How to get the pdf of this??
Hi Sambit. This video is created for learning. Put some effort. Watch all videos in playlist and try to start from scratch. It may take some time, but eventually you will learn and never forget. Good luck. Like, subscribe and share.
@@CIVILEngineeringTutorials for practice purpose can i get the pdf
No Sambit. Please let me know if nany new video or tutorial required. I will definitely help on that.
Videos are good but sequence to watch are not given
Sequence is there. Open the playlist.
czcams.com/play/PLGstbEuPUsWXn3Q9wZQhm8gPQ5RwtptAV.html
Y r still indian , so i want you teach autocad in hindi so easy for student
PlayList : Complete Building Drawing in AutoCAD | HINDI | Building #2 | हिन्दी
czcams.com/play/PLGstbEuPUsWXFJ0wReq9bNb-umcjAjGuq.html
Happy???
Another one
czcams.com/play/PLGstbEuPUsWW9AoGzYkEXwWXZoy6WKXEF.html
or hum kha se copy kre 🙄🙄
The floor plan you have.
Please try watching the whole playlist once. You will find the link in video's description or comment section.
The floor plan for this buliding
czcams.com/video/omcoTkYvDbY/video.html
Copy from here
Thanks for watching Minti
Didi tumi ki civil engineer
Yes
This the wastage of with some copy paste
The copy command was used where ever it was required. Its always preferable to have another plan(floor plan) in hand as reference and use it to make the site plan faster, When you are working for an organization/office, the work needs to be delivered fast by using short cuts. Go through all other videos in the channel.
Thanks for watching and your feedback.
Hindi please
Hindi
czcams.com/video/h6I4TcgG6HM/video.html
PlayList : Complete Building Drawing in AutoCAD | HINDI | Building #2 | हिन्दी
czcams.com/play/PLGstbEuPUsWXFJ0wReq9bNb-umcjAjGuq.html
did you make these videos when you were 15 ! how old are you ??
Did you ask the same question to your teacher when you were in kindergarten?
please send me the video via email
You can watch on CZcams itself.
it's not goog because you cpoying ....
The copy command was used where ever it was required. Thanks for watching and your feedback.
your adding more advertisement in single videos...to earn more money.Then, always doing copy paste and copy paste only..i am not intrested to see ur videos.
The copy command was used where ever it was required. Its always preferable to have another plan(floor plan) in hand as reference and use it to make the site plan faster, When you are working for an organization/office, the work needs to be delivered fast by using short cuts. Go through all other videos in the channel.
Thanks for watching and your feedback.
not good at all, because u r copying...should have been titled as "how to use copy command in AutoCAD" instead
The copy command was used where ever it was required. Thanks for watching and your feedback.
please let us know what exactly you are looking for?
prepare a site plan, containing front elevation of proposed building, an arbitrary road, some existing buildings etc from the data taken from a site....please
sure. wait for it.
thanks....
Is not good because you copy Past 🤭🤭🤭
Copy paste
What a joke . you are just copy pasting. Will we be provided sample drawing and we will copy paste . if sample drawing is provided then what is the need to hire civil enhineer😀😂😃
The copy command was used where ever it was required. Its always preferable to have another plan(floor plan) in hand as reference and use it to make the site plan faster, When you are working for an organization/office, the work needs to be delivered fast by using short cuts. Go through all other videos in the channel.
Thanks for watching and your feedback.
Respectable tutor as a matter of fact the problem i am facing is related with 3D. i want to apply extrusion (using press pull) of 4" upwards and so as downwards. But i am able to apply only upwards, but as i select the object for applying 4" downward extrusion (using press pull) it never applies directly, instead i have to use 3D Rotate to change its direction upwards and then it applies extrusion.
Is there any way to press pull it upwards and downwards without using 3D Rotate?
Note: I tried to use Dynamic UCS, but failed.
Please help me because it would be handy for me during making drawings without using 3D Rotate. Please send me official email of yours so that even i can send u screen shots. Plz help me.
Share your email id please
Thanks
Welcome