I Build 2 Seat Latches You Can't Buy! - OEM Quality
Vložit
- čas přidán 22. 01. 2021
- I built the custom seat & tank Latches because I wanted something I wasn't able to buy, This motorcycle tank mount rubber is not available any more as its a 1979 fuel Tank.
Cafe Racer Seat Latches Overview - Cafe Racer Garage
SHOP - www.caferacergarageshop.com/
Parts and tools I use: www.amazon.com/shop/caferacer...
#CafeRacerSeatLatches #CafeRacerBuild #CafeRacerGarage
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for CZcamsrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. IF YOU'RE BUILDING A MOTORCYCLE, DON'T MISS THIS! - TimeLapse
• IF YOU'RE BUILDING A M...
★ 02. EASIEST Way To Make a CUSTOM License Plate Mount / TAIL TIDY For a CAFE RACER
• EASIEST Way To Make a ...
★ 03. Honda CB750 Frame Mods, Making Custom Brackets + GARAGE EXTENSION
• Honda CB750 Frame Mods...
★ 04. RUBBER MEETS ROAD! ★ & Building the Under Seat Tray with A Key Lock - EP.57
• RUBBER MEETS ROAD! ★ &...
★ 05. Making a Custom CHAIN GUARD That Becomes An IMPRESSIVE FEATURE! Step-by-Step | Ep56
• Making a Custom CHAIN ...
★ 06. Making a CUSTOM Motorcycle SEAT LATCH + [100k subs GIVEAWAY] Ep.55
• Making a CUSTOM Motorc...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
===================================================== - Auta a dopravní prostředky
Great looking project! I just started watching this Canadian guy Ecrn Garage, he's a bit rough but does some cool stuff. Cheers!
That’s cool I hope you are getting inspired 😁
Once again..... more great tips and tricks...... and YES, that’s a knife!
Man I live your channel. Keep up the amazing content!
Thank you so much mate i’m glad you are enjoying it I have plenty of videos still to come I have no plans on stopping any time soon 🙂
Happy Australia Day!
You're a stronger man than me, I can never understand how you guys can handle the veggiemite!
I love the stuff :) We are given it as babies and grow up with it :)
Oh man... i frickin knew your doing a cooler thingy for a beer 🤣 felt like im watching Bigstacked for a second. Love you people in the land down under❤ happy Australia day 🇦🇺 from the cold snowy Finland 🇫🇮
I don’t think he says a word in his videos 🤣😂
@@CafeRacerGarage nah he doesn't but the beer is in every episode 🤣💪
Vegemite ,i think it's the same as marmite that we get in England.......i bloody love it !!!....a good thick layer of marmite on your toast with a cup of tea ...oh yeah !!!.
Merry Christmas to you and your family, stay safe mate ,peace out ✌
Happy Australia Day Dan . Nice new tools ..been looking at a roller for some time but at mo bending over a tube anvil will do .. next time use the small knife on the vegemite , I think even mick Dundee wouldn't use that much lol.
Haha 😆 yes you are 100% right. You should invest in one eventually if you can. It’s an amazing tool
Happy Aussie day from Perth, WA, take care Rich
Thank you Rich and be sure to have a beverage tomorrow
Great vid, Dan. Nice knife! Mr. Dundee would be proud of you. You have the greatest workshop tools, Mate! And skill too lol of course!
🏍👍🏍
Thank you so much mate, I think a tall centre bench on wheels, of course, might help with the flow of things so I can work faster and have the camera up and off the floor. Side question. What videos are you most looking forward to
@@CafeRacerGarage quite welcome, my friend. Ok re the bench arrangement- I think I know where you’re heading with it. As far as new vids, am certainly looking forward to your garage expansion ones and of course, is there another project bike in your future? 😉
@@garya3056 Ok that is interesting I didn't think you would say that LOL. I have just done a quick update behind the scenes video on both of those topics this week for my patrons only, It's in the works is all I can say but had a scary setback :) Yes the Virago 750 is on its way when I finish the CB :)
@@CafeRacerGarage sweet re the Virago. Hope everything got squared up eventually?
Happy Australia Day 👍🏻🏍
Your work is just an Inspiration, I follow your Videos for some time, Great Job 👍🏻👍🏻👍🏻🏍🏍🏍
The way you prepare your toast... I like
A big Hiii from Germany
I’m not sure eating that toast was a wise choice but it was fun for the video :)
You always do good work, but the ingenuity here was impressive!
Thanx brother. Not sure what bit you are referring to but I hope it helps give you some ideas and Inspires you to have a go
Happy Australia Day to you Dan! love the new tools.
Thank you mate and Where are you located?
Hoges would be proud of ya. Shoulda asked the missus to hand over the vegemite toast over to ya. Then it'd be a truly down under meme.
Ha ha so true :)
Love the knife joke 😂🤣
Hey from denmark
Thanx mate
Love Denmark 🇩🇰
Man, you're on another level with these fabrication skills!
I’m still learning as I go brother. Plenty of mistakes to be had I’m sure 😁
@@CafeRacerGarage p)…, mm mm
Happy Oz day m8, like the stubby holder & seat latch & new toys hahaha.... : )
Thank you mate. It was fun to make but probably won’t wake another one lol 😂
i've been waiting for that Dundee skit for soooo long :D
nice new toys Dan .. and great craftsmanship - as always
Thank you mate. Yes it was a sure thing I was going to do eventually. Where are you located?
@@CafeRacerGarage Slovakia my mate ... quite literally the opposite site of the planet :D
2:19 YESSSSS!
your amazon link doesn't seem to work.
what is the lathe you have?
Another good video Dan, the knife bit cracked me up! I thought you were fabricating an Aussie flag for the bike for a second there. Happy Australia Day mate!
Thanks mate LOL Here is a flag video I posted today czcams.com/video/zvwX4-y-52w/video.html too big to fit on the bike tho HaHa. Have you got yourself a project bike yet?
@@CafeRacerGarage Ha! At least 2 of my bikes are projects and I only have 2 and a half!
Happy Australia Day! Motorcycle Dundee 👍😎👍
Haha that's a good one :) Well said!
LOL, how long have you been waiting to use that line, lol, well done Dan. Happy Australia Day !
A while lol, its the first time I've used the knife for anything as It was sitting in a drawer for years. I had buy the shiny object syndrome i think and soon realised if was to big to do anything with haha
@@CafeRacerGarage Still, very funny, we all got the reference. Classic mate !
More great toys Dan, hows the extension to the garage going by the way. So glad you didn't eat the Vegemite on cam (insert vomit emoji x3)!! The stubbie holder is the absolute dogs, enjoy your TED even more from that one. What a knife !! Aussie Aussie Aussie
If I didn’t know you were Aussie I do now by using the lingo lol 😂
I’ve actually just done a extension update to my patrons only. I won’t go public with it just yet. I like to give them something a little extra for supporting me if you know what I mean 👍😁
I have a small slip roller that I make my expansion chambers with its great
This sounds interesting 🤔 what are the expansion chambers for?
Banshee 350 in a racing lawn mower ..... love the vids mate no fluff and great editing
You don't need any tools, knives, or blades to cut those plastic straps used on the box. Find the joint where the ends were fused, then twist or flip that area of the strap so that you see the bottom of the fused joint. You'll see a neat little half inch (1cm) tab that you just pull with thumb and finger. Done!
Thank you Mitch that’s a cool trick. The knife was more of an overkill for everything I think lol 😂
Why did you get that sheet cutting thingy when you got your laser thingy ?
I'm not sure what a laser thingy is but each tool has is out purposes and that set of sheers can cut 6mm solid steel like butter.
@@CafeRacerGarage i was talking about the laser cutter, can’t you do just about anything with it? And very precisely
Fosters beer? lol
🤮 Aussies don’t actually drink that stuff lol 😂
A little play for paint or powdercoating? Its almost half a Zentimeter, man
I thought the thumbnail was an LED flip-flop at first glance lollll
It does look a little like that doesn’t it lol 😆
That is a knife my friend
So where are the seat latches? Did I miss them?
Great question Talita, the seat latch is the part that latches under the frame to lock the seat in place, it’s the same system a bike manufacturer users to lock a seat from moving, sorry if it wasn’t clear. I do have a few more recent videos showing seat locks if that is of help to you?