Video není dostupné.
Omlouváme se.
Suction Issues and Troubleshooting with the Elvie Pump
Vložit
- čas přidán 17. 08. 2024
- Elvie Breast Pump had been such a lifesaver during my breastfeeding journey. I was exclusively pumping since my daughter wasn't the best latcher. During this process i learned various troubleshooting and tips when using the Elvie especially when it came to suction and milk production. I mean, don't get between a mama bear and her baby cub's milk. haha. Watch this video for more knowledge and ways of fixing most common issues with the Elvie. We hope you found this video helpful and if you have any questions or comments, let us know below.
Please subscribe and visit us on our website community and we look forward to reading your comments. ❤️ 💫
Visit Us: www.akkoandtam...
TIMESTAMP:
0:00 - Intro
00:30 - All Parts need to be Dry
00:55 - Seal Positioning and Issues
01:24 - How to test your suction power
02:40 - Alignment Issues
03:21 - Having the correct breast shield
04:12 - Valve Issues
06:42 - Bra Issues
07:45 - Warped Breast Shield Issues
08:47 - Battery Issues
09:24 - Why update your Elvie pump - IMPORTANT
10:21 - Warranty
********************LINKS*********************
ELVIE
►Elvie Breast Double Pump:
Buy on Amazon: amzn.to/3fecBKs
Buy on Target: bit.ly/31ydnf1
►Elvie Breast Single Pump:
Buy on Amazon: amzn.to/39clkfE
►Elvie Breast Pump Seal:
Buy on Amazon: amzn.to/309JUdm
Buy on Target: bit.ly/31DKcXN
►Elvie Breast Pump Spout and Valve:
Buy on Amazon: amzn.to/2X9YaB6
Buy on Target: bit.ly/2KJHpFM
►Elvie Breast Pump Bra Clip:
Buy on Amazon: amzn.to/3feQ5kN
Buy on Target: bit.ly/2KHTtaB
►Elvie Pump Breast Shield 28mm:
Buy on Amazon: amzn.to/3gfXPUQ
Buy on Target: bit.ly/2KwDWM4
►Elvie Pump Breast Shield 24mm:
Buy on Amazon: amzn.to/3fbOeNy
Buy on Target: bit.ly/2yXyzPn
►Elvie Pump Breast Shield 21mm:
Buy on Amazon: amzn.to/313mJk7
►Elvie Breast Pump Bottle:
Buy on Amazon: amzn.to/3fePmjz
Buy on Target: bit.ly/31FVzPj
BRAS
►Nursing Bra: amzn.to/3fncrk5
►Full Cup Lightly Padded Wirefree Nursing Bra: amzn.to/3k5RYE1
PORTABLE BATTERY PACK
►Anker PowerCore Portable Charger 15600mAh: amzn.to/2BU1yZm
(This is the updated version of ours)
►For a more compact version
Anker PowerCore 13000, Compact 13000mAh: amzn.to/2Dshti2
►For one with more power:
Portable Charger Anker PowerCore 20100mAh: amzn.to/33jOEPP
BEAUGEN CUSHION
►New Breast Pump Cushion: amzn.to/3kdF1KA
Also, if you're planning to buy any of the items mentioned please help us by purchasing using the links below, so we can continue making family related videos to help you create a better and more joyful family life. :)
Wishing you all the best on your breast pumping journey.
FOLLOW US:
► Instagram: / akkoandtamo
#Elviepump #Elvietroubleshooting #familywellness #improveyourmarriage #raisingchildren
All business inquires: helloteamtako@gmail.com
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
HEALTH ADVICE DISCLAIMER
The information contained in these videos/text is not intended nor implied to be a substitute for professional medical advice, it is provided for educational purposes only. You assume full responsibility for how you choose to use this information. Always seek the advice of your physician or other qualified healthcare provider before starting any new treatment or discontinuing an existing treatment. Talk with your healthcare provider about any questions you may have regarding a medical condition. Nothing contained in these topics is intended to be used for medical diagnosis or treatment.
TIMESTAMP:
00:30 - All Parts need to be Dry
00:55 - Seal Positioning and Issues
01:24 - How to test your suction power
02:40 - Alignment Issues
03:21 - Having the correct breast shield
04:12 - Valve Issues
06:42 - Bra Issues
07:45 - Warped Breast Shield Issues
08:47 - Battery Issues
09:24 - Why update your Elvie pump - IMPORTANT
10:21 - Warranty
Thank you for this video! I was very close to buying a whole new pump which isn’t cheap. Thank you again!!
I am so happy I found your channel!!! Thank you so much!! I would’ve never figured out it was the valve!!!!
So glad it helped.
Very helpful, thank you! I’ve been hearing so many mixed reviews about the Elvie. My sister in law swears it hurt her milk supply while I see others exclusively pumping with it. The price point is so high too I didn’t want to risk it. I ended up choosing a medela pump but still want this one for when I return to work.
Thanks!
@Rebecca Medela is always the safest bet when it comes to pumping. With the Elvie it really depends on that person unfortunately. If it helps, there are groups in Facebook that sells their used Elvie only if you’re interested. Thank you for watching.
This video has been very helpful. I had problems with my pump and after watching your video I was able to use my pump again.
Hi @Phebe so glad it helped.
What is problem?
Thank you so much for this video! I don't have extrem issues but these litte tips made my pumping experience so much better!! Also i love your channel! Just discoverd it now throu this video.❤
@mary thank you.
Thank you so much for a really good troubleshooting video - it helped me alot! ❤
So glad it helped @pathosia
So helpful thank you!!!
This video helped big time. I was about to give up after paying the $500. Bless you
I’m so glad this helped.
Wow thank you! It was my valve! It was torn! Suction now working!
@meghan so glad you found the problem. Happy pumping. Xoxo
Did you figure out how it had torn? This is my second valve that’s tearing and it’s supposed to last 6 months at least, right?
You’re the best! Thank you
Thanks for your video, it’s very helpful!
Glad it was helpful!
very helpful information.
Thank you this is helpful
Thank you!
You’re welcome ☺️
great video thanks
Really really helped…thank you so much
Of course. Congrats on your babe and best of luck on your pumping journey
Very useful!
Thank you
Thank you so much for this video! You are a life saver
So glad it helped
Thank you so much for this video!!
Of course. :)
2:34 good morning, this is what my pump is having issues with. It’s not suctioning right when I lay the other green piece on it. How do I fix this though? Thank you so much!
Hi @gracelindsey3406 if you’re not getting any suction when you lay the green piece, it may be a set up issue or a hub issue. Is this a problem from the beginning? Do you feel the air sucking in from the actual hub when you disassemble everything? If so, it’s a set up issue. If not, then I would contact Elvis support.
In the event you feel the air being sucked in from the hub, there are multiple issues we have to look at. #1. Let’s check to see if the green seal is properly fitted. czcams.com/video/gTDVDgt5RmY/video.html @4:45 . #2, let’s check the valve czcams.com/video/gTDVDgt5RmY/video.html @5:19.
Try these three things and let me know if you were able to solve it or not. Cheers
Great video! Thank you.
1.what is the brand of the cold water tablets to clean the shields?
2. What does it mean if while pumping milk leaks out of the Elvie onto the inside of my bra ?
Hi @Amy &Chris! I personally didn’t use the cold water tablets but this is what Elvie support suggested. I suppose any brand would do.
In regards to your leakage issue, are you stationary? In an upright position for most of the time ?
Leakage can come from various factors. it can mean the valve isn’t functioning correctly. What I mean by this is that the valve isn’t able to open completely and is stuck together after washing. Leakage can be due to moving too much or angling the Elvie too much.
Hope this helps.
Hi! If the second test doesn’t work what should I do?
Hello @veronicamoretti would you clarify the second test ? Is this when you place three seal in the hub test? If you are not getting good suction from the hub, you would have to contact Elvie in hopes for a new hub.
@@AkkoandTamo Hi! the test you are making at 2.20min, this in my Elvis doesn't work, I don't see any function
I noticed you mentioned the valve shouldn’t be worn but if it is completely sealed it will create issues. How much of a slit should it have in it?
Hi Kirsty, great question. You just need to make sure the value isn’t stuck together. As long as you can squeeze it and it splits, it’s good to go. Now, if there’s too much spacing present (without squeezing the valve) then you may need to replace with another to have optimal suction.
Hi! Thank you so much for this video! I have trouble with suction on one of my pumps and I followed your steps to see where I'm having issues. I have no issue with suction when I place the seal into the hub but if I fully assemble it and place the other seal where my nipple would be (as you did at 2:27 in your video) I'm getting no suction at all. Any thoughts on where my issue may be or what I can try? Thank you!
Hi@ Azada I’m sorry you’re having Trouble with suction. It can be frustrating. I’m thinking the problem is in the valve or seal. Have you checked to see if the seal is nice and flat (see 1:00) if that’s not the problem have you check to see if the entire upper part of the valve is showering (see 4:40) ? Please let me know if this helps?
@@AkkoandTamo Ok! Checked both and not seeing a problem there.
@Azada. Hmmm. Weird that you’re getting no suction. Was it ever working properly ?
My wife and I had this same problem, I was able to get it to work by ensuring the seal for the soft plastic portion didn't move when inserting the hard plastic portion. That's the only thing that I can think of that would have caused this issue. Hopefully this helps!
I hope it helps too.
What is the name of that cushion you used if it was between sizes?
@story-time Dad, great question. It’s called BEAUGEN CUSHION. Here’s a link so that you can find it with ease:
amzn.to/3kdF1KA
Cheers!
Somehow my milk is getting stuck in the green circle at the top in between the shield, when I take pump off all the milk comes pouring out. I don’t know why it’s doing this
Does this happen when you are just sitting still? If not, try that it’s possible that there’s too much movement. If you are just sitting, try completely drying all parts especially the green seal. And making sure it’s properly places against the breast shield. Let me know how that goes.
One of mine makes a high pitched beeping sound. What could it be?
Is the high pitch sound when everything is connected? Does the hub sound different before set up and after?
@@AkkoandTamo yes it still makes the high pitch sound when I detach it from me with the hub still pumping
@@AkkoandTamo it doesn’t immediately start making that sound, and it’s not all the time but when it does, it starts anytime during my pumping sessions.
Hmm it’s strange that it’s not consistent. I would try Elvie’s customer service and see if they can help further.
Hi Akko, may I please know how long have you been using the Elvie and has it been able to maintain your milk supply? I'm using the Spectra S9 now and worrying of decreasing milk supply when switching to the Elvie.
Hi! When I would travel I used the Elvie but when I was back home, I would use both the Spectra and Elvie. I used the spectra because I didn’t have to pump for as long as the Elvie (~35-40min) to get the same amount.
Everyone is different so I would advise you switch slowly. And if it doesn’t work out, use the Elvie during your outings or when you need to be hands free.
Hope this helps.
@@AkkoandTamo Thank you, Akko. As you have been using the Elvie for 2 years now, how do you feel? Are there any parts replacement you have to do throughout the times using?
Great question, I would say the usually wear and tear products such as the replacement of the valve, possibly the breast shield depending on how you wash; it doesn’t tolerated the dish washer very well. Those are the two items I probably had to replace during my pumping journey.
I can also see that some may need to replace the seal.
Hello, I am having some issues on the output, basically after 5 min I stop having milk flow and need to make a letdown step again. Did you have the same is sua?
@Ana hi, I did not have this problem. Are you having to continually go back to the let down step? Have you checked to see if any of the parts are wet or even moist? Are you moving while pumping or still?
What does it mean that the breast shields are warped? I've been noticing the clicking and creaking sounds recently
Hi @cantcatchthis the warped breast shields usually are due to the sterilization process. How do you sterilize your breast shields? if you are noticing the clicking and creaking I would definitely contact Elvie for further assistance. Hope this helps.
I think my shield is warped because it’s making the clicking noise and I’ve only had this pump a few days. 😣
Hi @Monica Hernandez I would suggest contacting Elvie and letting them know about the sound. They should send you a new one. Hope this helps.
Hi
Thank you!!! Great!
Th