Karcher K2 Repair.....Or how to repair your Karcher power washer twice.

Sdílet
Vložit
  • čas přidán 28. 02. 2023
  • In this episode I show you how i repaired my Karcher pressure washer
    Facebook : Kyusha Style Tuning
    Instagram : @kyushastyle
    TikTok : Kyusha Style Tuning
    All music written, performed, produced and copyright of BigEnd! 2023
  • Zábava

Komentáře • 37

  • @Mar-po9os
    @Mar-po9os Před 2 měsíci +1

    Thanks, in the end we figured it out and today i cleaned my terrace again 💪🏼 it’s working!

  • @Brett440
    @Brett440 Před rokem +4

    Well done on saving your Karcher’s life. I never knew they stripped down to that extent.

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před rokem

      Thanks mate. It’s surprising how many parts you can get for them now too. 👍⚒

    • @chrisgallivan1673
      @chrisgallivan1673 Před rokem +1

      Hi I did the same cracked the elbow taking it apart getting the starter button to work .daft question, how do you get the elbow off the hose to the gun I ended up dismantling the light grey piece by its still attached given up for today but glad i found replacement part .Good video was about to chuck it away
      .

    • @chrisgallivan1673
      @chrisgallivan1673 Před rokem +1

      Got it sorted 👍

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před rokem

      Glad you got it sorted. 😎👍

  • @jonbjornestad6322
    @jonbjornestad6322 Před rokem +1

    Just repaired mine with this vid thanks

  • @RasDil
    @RasDil Před 3 měsíci +1

    Have the same issue. Thank you for making this video.
    !😊

  • @stuartlight2893
    @stuartlight2893 Před 6 měsíci +1

    Great information thanks

  • @prnfl
    @prnfl Před 22 dny +1

    IT WAS THE FUSE IN MY CASE

  • @toffeepie1878
    @toffeepie1878 Před 4 měsíci +1

    Thanks for the video, I need to do the same - I got a bit carried away with my K2 and hooked hot water from the kitching sink into it- - I think I will need new O rings plus that head you replaced - did you replace any main O rings on the motor itself - does the head include a gasket / O ring?

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před 4 měsíci +1

      Glad you liked the video. The head came with gaskets already fitted. Plus the intake came with new gaskets and grease. You can get pretty much every part for them now though. 😃

  • @julianreme
    @julianreme Před měsícem +1

    Thanks for the video. I dismantled my K2 and replaced the pump head. The pulsing is still there, though. Do you have any other ideas?

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před měsícem

      Check for leaks on the intake or outlet pipes. These can crack with age. Glad you liked the video. 😎👍

  • @andrewboxall8460
    @andrewboxall8460 Před 10 měsíci +3

    What is the amount of oil in (milli-litres) do you need to put in on reassembly of a Karcher K2?

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před 10 měsíci

      Hi sorry but I’m not too sure as I didn’t have to refill mine as I kept it upright when taking it apart. You should be able to find the info on the Karcher web site though. 👍

  • @Mar-po9os
    @Mar-po9os Před 2 měsíci +1

    Do you have a picture of how to put the wires back? I didn’t made the picture 😢

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před 2 měsíci

      Hi. Sorry but I don’t have the pic anymore. You might be able to download a wiring plan from Karcher

  • @paulstir
    @paulstir Před 4 měsíci +1

    Great job , my switch has gone £10 eBay

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před 4 měsíci +1

      Thanks! It’s good you can basically get every part for them. 😃👍

    • @paulstir
      @paulstir Před 4 měsíci +1

      @@KyushaStyleTuning indeed , I ended up jamming the switch in the on position, now I just turn on and off at the plug lol , I will get round to buying the switch, also has a slight leak

    • @paulstir
      @paulstir Před měsícem +1

      Just an update I have replaced my switch and the cylinder head , fully restored pressure washer 😁👍

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před měsícem +1

      @@paulstir excellent! Glad it’s all fixed. 😎👍

    • @paulstir
      @paulstir Před měsícem +1

      @@KyushaStyleTuning thanks to your guide, cheers brother all the best

  • @abdfakhour7561
    @abdfakhour7561 Před 8 měsíci +1

    Hello from France, Please give me an internet link to be able to order the parts for my water leak problem from the Karcher

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před 8 měsíci +1

      Hi! 😃. Try www.espares.co.uk 👍

    • @abdfakhour7561
      @abdfakhour7561 Před 8 měsíci +1

      Merci

    • @morekeena2395
      @morekeena2395 Před 2 měsíci

      I watched 4 videos before this one and the second part you bought seems to be the culprit in every vid. Thanks and cheers 🇺🇸

  • @user-rn5pp8co5b
    @user-rn5pp8co5b Před rokem +1

    Karcher leaking oil

  • @atkatchenko6225
    @atkatchenko6225 Před rokem +1

    That’s when repair cost is greater than a new one

    • @KyushaStyleTuning
      @KyushaStyleTuning  Před rokem +2

      But it wasn’t was it.

    • @PHILL7800
      @PHILL7800 Před 5 měsíci

      I replaced my Karcher with a Gerni. It has aluminium and brass components and plenty of power. Best repair I’ve ever done 😊