Best lads around! I broke down, told them what's happened, they talked me through doing a temporary blank plate+ got home safe and sound!!! Thanks Dez and his crew!!
I had too replace the injectors on my 2008 D22 2.5 litre str Navara. After doing some research I found out that here in Australia the fuel (diesel) is pretty dirty. If u live in Australia it’s a good idea to fit a secondary fuel filter. The standard Nissan fuel filter has a 10 micron filter which will let contaminants smaller than 10 microns into ur injectors. The secondary fuel filter is 2 microns. The extra cost of having a secondary fuel filter is nothing compared to the cost of 4 injectors (2000 Aussie dollars).
All Great videos brilliantly explained on the upkeep on the nissan navara I have a 2012 tekkna double cab done 133,000 miles with the help on videos it's still going strong Thankyou
Gday mate, watch ur vids here in Australia. I'm originally from west Yorkshire. Can I ask, do u guys recommend an egr blanking plate? They do it alot over here. Thanks mate.
Hi mate good job have similar probs with my 2006 navara it's been remapped which I believe is the problem by an previous owner how do I get it set back to standard thanks
Just bought a 2.5 diesel pathfinder. Nice when running but Very hard to start, runs lumpy when you get it running smokes grey / black at low revs and stinks dieselly - any ideas :( it runs ok when warm, shame it's a nice car otherwise! 😥
Gday from aus guys, I've just bought a 2008 navara single cab rx, just done 180000km and only lately has had the egr block completed but I do have small amount of black smoke. Puff when taking off and a small amount under full acceleration. Just wondering if it could just need an intake manifold clean as i would dare say it would be carboned up and not allowing enough air in. Anyway any chance you can do an intake manifold removal video. Would like to clean it regardless. Cheers
Hi I have a Nissan qashqai only 2 month ago I got a dpf warning light. I got that cleaned now there is black smoke coming from the exhaust when I exhilarate what do you think that could be.
Can I ask what side the egr valve is located on a 2009 2.5dci Nissan pathfinder tekna. Struggling to find the engine diagram on the internet thanks in advance
Hi there, i have a 07 Nissan navara, 130000 on the clock and it goes into limp mode when pushed hard, i plugged in the diagnostic tool and it brought up a fault code p1272 (Air fuel (AF) ratio sensor 1 - voltage high) do you have any ideas what this please? Thanks jonny
Hey my navara d40 engine is back pressuring its coming off the hose from the rocker cover to the air intake to the turbo when at idle its smoking alot blue. Can anyone tell me what is the problem with this.
I have a 05 yd25 pathy...I literally put new head casting on...was sweet as for 3 solid days....ran like a dream..happy days....until....lost all power...looked down and it's overheating...I turned engine off...pulled over...sat to cool down..steamy......went to start it...had trouble starting.1 or 2 times..got it started...done U turn to be on the safer side of road and dies on..me...so I tried to start again..it didn't sound right...so I looked under bonnet and it's spat the 2nd and 3rd injector out n oil everywhere..what would in the hell have caused this???...also there's no water inside engine....and still trurns over freely with injectors out and glow plugs out...what caused this? I'm having a bad bad run with this car...
Iv just found out how right you are,, from just losing power slightly to, a completely fucked DPF, to my car looking more like a 150yr old soot blowing steam train, to stuffed injectors it now costing me a pocket of cash to fix the piece of shit.
Hi what would you recommend when lifting the Navara for 2 inches by using the levelling kits? Do I have to change the suspension? And other stuff beneath the truck? Or what things should I be aware of before lifting it for about 2inches? Thanks. REPLY
I had a 2 inch leveling kit fitted on mine. I was going to have a go at doing it myself but ended up taking it to a local garage - but was glad I did. The back spacers went in easily, but because mine is a 57plate it had a fair bit of corrosion on the bolts that held the front struts in. As I understand it, the 2inch leveling spacers have to sit on top of the springs in the recess that the stock suspension sit in. The mechanic ended up having to buy a special 'nut cutter' tool to remove my bolts (these would normally be reused when fitting the spacer / leveling kit) thinking he could just use some generic strut bolts he had on the shelf. Problem is Nissan apparently dont use generic bolts on the struts, they use special ones that cant be bought seperately. So he couldn't put the front wheels back on... At his point the truck was stuck on his ramp, in his small workshop holding up other jobs. Nightmare. I phoned Des who kindly put me onto a company that custom fabricates bolts. Cost me about £300 for 2inches of lift - But it looks great. The differance is only subtle, mostly visible in the wheel arch space. In Hindsight I should probably have gone for a full after market suspension kit as I hear they are much better than the leveling kits (which still use the stock suspension). And another inch or 2 of lift - purely for looks :)
czcams.com/video/O8o_oP0sIvY/video.html This is how my leveling kit works.The bolts I had problems with are here: czcams.com/video/O8o_oP0sIvY/video.htmlm9s This guy made it look easy cos the truck is brand spanking new.
Good day. My d40 2012 is having a problem my idling is getting low that sometimes the engine shuts down. I did check the maf it is cleaned. Did a diesel filter changed and oil filter got changed. Still the idle is low around 400-450rpm. I did clean the throttle body
I know this is an older video but I have a 2007 pathfinder with 200k km it has black smoke and had low power. I blanked the egr power then OK. It seems to run a bit rough at idle but OK at 850 or 900 rpm. I removed all injectors cleaned them and reinstall with new washers. Spray patterns looked OK with my basic test. If I remove the plug from each injector they all seem to have same effect on motor. If I remove any one plug for more than a minute the engine seems to Rev up to around 1200rpm even when I replace that plug it will remain at higher revs. I Rev engine and no black smoke but there is no real power until I switch off and restart then power back but black smoke returns. Any idea what to look for next?
It seems you need to get the injectors tested there’s 3 reasons of black smoke egr injectors and air filter and secondly the lack of power sounds like the SCV if you replace the SCV you will need to do a fuel pump reset and change the fuel filter Hopefully this helps you out buddy All the best Des
Nissan pathfinder 2.5d,turbo is not bosting... The big pipe that goes to the intercooler is not expanding when I put the car on 3oo reaves.. I tried changing the vacuum turbo boost valve but it is still not boosting. I removed mass air flow meter then it started showing a small difference positively. So does this mean mass air flow meter need to be replaced or it can be something else? Thank you
Hi Des ,live in Australia,not UK,I have a 2012 d40,it’s done 83000klms just starting to blow a little soot and using a bit more fuel,where do you reckon I start,injector service or carbon clean out.thanks in advance.Troy.
Troy Meredith Hi buddy I would get injector additive in full tank of fuel and a service we did a video on servicing All the best Des Also never let your fuel tank go below a quarter of a tank of fuel class that as empty
I believe you are a zimbabwean. Any caused by cooling system not working properly. Cooling fan, water pump, thermostat or cracked pipes leaking. Simple diagnostics. Then misfire problem in cylinder are many factors eg cracked cylinder head, worn headgasket on cylinder number 1, spark plug or injector.
My Pathfinder's turbo spits a lot of oil in the intercooler, and puts out a lot of black smoke when launching from stand still. What do you think i shoud check? Thank you very much
Have my eye on a nice 2009 pathfinder , 2.5l diesel, looks mint , manual, 100,000 miles.5,900 euro,sounds great but just shittin to buy a lemon, hear lots of issues about pathfinder . Anytips thanks.
Hello, I have pathfinder 2.5 diesel. Scv gives 29-31 mpa At idle. And the ECU has a task of 28. Is this normal?. The engine is very loud. Pump regenerated. New injectors. Replaced the scv valve, nothing has changed. Now the idle pressure is 35 MPa Maybe it is about the thickness of Black smoke when starting off. Black smoke when starting off. And with acceleration. Trottle stops as I accelerate. When I drive at a steady speed, the rattling returns. When I drive at a steady speed, the rattling returns. I have a new injectors, pump, scv, maf, map, closed EGR. There are two problems. Loud, rattling noise like injectors and black smoke in first gear and accelerating. The engine is quiet when I accelerate and loud when I drive at a constant speed. Maybe someone will help?
I have a navara that is randomly blowing bluish white smoke it often will completely stop if I shut it down and restart it straight away and it may stop doing this for a week or so then start again any one have any ideas why
Hi I have a 2007 pathfinder. It's blowing black smoke and is underpowered. The following was checked. Turbo seems ok but has low boost, vacuum pipes was checked. The mechanic seems to be a bit lost. Any suggestions? Thank you you videos are very informative. Nizaam
2008 Nissan pathfinder engine rebuilt new double row conversion will not run with cam angle sensor connected, replaced sensor no difference, connected hard to start, stops dead under a 1000 rpm. Without cam sensor connected starts straight away idles smoothly no noises
@@westyorkshireengineservice9160 okay so I should check those 2 cylinder n turbo, but it was on service they changed injectors n also done a major service but still smoking.
Best lads around! I broke down, told them what's happened, they talked me through doing a temporary blank plate+ got home safe and sound!!! Thanks Dez and his crew!!
I had too replace the injectors on my 2008 D22 2.5 litre str Navara. After doing some research I found out that here in Australia the fuel (diesel) is pretty dirty. If u live in Australia it’s a good idea to fit a secondary fuel filter. The standard Nissan fuel filter has a 10 micron filter which will let contaminants smaller than 10 microns into ur injectors. The secondary fuel filter is 2 microns. The extra cost of having a secondary fuel filter is nothing compared to the cost of 4 injectors (2000 Aussie dollars).
All Great videos brilliantly explained on the upkeep on the nissan navara
I have a 2012 tekkna double cab done 133,000 miles with the help on videos it's still going strong
Thankyou
Gday mate, watch ur vids here in Australia. I'm originally from west Yorkshire. Can I ask, do u guys recommend an egr blanking plate? They do it alot over here. Thanks mate.
I'm brazillian I loved your vídeos,congratulation!
Hi mate good job have similar probs with my 2006 navara it's been remapped which I believe is the problem by an previous owner how do I get it set back to standard thanks
Me encantan tus diagnósticos,
is that one lifted? looks so high when you stand next to it?
othervise thats a bunch of Good looking trucks you got there
How do i connect the turbo sensor pipes to the Narava engine 2005 (2.5 automatic). What goes where??
Just bought a 2.5 diesel pathfinder. Nice when running but Very hard to start, runs lumpy when you get it running smokes grey / black at low revs and stinks dieselly - any ideas :( it runs ok when warm, shame it's a nice car otherwise! 😥
Gday from aus guys, I've just bought a 2008 navara single cab rx, just done 180000km and only lately has had the egr block completed but I do have small amount of black smoke. Puff when taking off and a small amount under full acceleration. Just wondering if it could just need an intake manifold clean as i would dare say it would be carboned up and not allowing enough air in. Anyway any chance you can do an intake manifold removal video. Would like to clean it regardless.
Cheers
Like your style am from Jamaica I work on lots of Nissan too I also calibrate fuel pump and injectors I love my job
Hi I have a Nissan qashqai only 2 month ago I got a dpf warning light. I got that cleaned now there is black smoke coming from the exhaust when I exhilarate what do you think that could be.
Do you work on Nissan Terrano
Hello I have a 2010 d40 Navara st has fault code p2118 was wondering if know much on it car is abit sluggish any help appreciated thanks
Can I ask what side the egr valve is located on a 2009 2.5dci Nissan pathfinder tekna. Struggling to find the engine diagram on the internet thanks in advance
Is there any 7 seater path finders that dont have dpf
Hi there, i have a 07 Nissan navara, 130000 on the clock and it goes into limp mode when pushed hard, i plugged in the diagnostic tool and it brought up a fault code p1272 (Air fuel (AF) ratio sensor 1 - voltage high) do you have any ideas what this please? Thanks jonny
Hey my navara d40 engine is back pressuring its coming off the hose from the rocker cover to the air intake to the turbo when at idle its smoking alot blue. Can anyone tell me what is the problem with this.
I have a 05 yd25 pathy...I literally put new head casting on...was sweet as for 3 solid days....ran like a dream..happy days....until....lost all power...looked down and it's overheating...I turned engine off...pulled over...sat to cool down..steamy......went to start it...had trouble starting.1 or 2 times..got it started...done U turn to be on the safer side of road and dies on..me...so I tried to start again..it didn't sound right...so I looked under bonnet and it's spat the 2nd and 3rd injector out n oil everywhere..what would in the hell have caused this???...also there's no water inside engine....and still trurns over freely with injectors out and glow plugs out...what caused this? I'm having a bad bad run with this car...
thank you video !
So who are the faulty parts?
Have 2010 navara thai built...no error codes on dash...runs ok on flat...but up hill struggles....could it be oxygen sensor..thankyou😊
Hello i need your help in my navara. It is smoking black smoke . How to repair it . Please reply me
Iv just found out how right you are,, from just losing power slightly to, a completely fucked DPF, to my car looking more like a 150yr old soot blowing steam train, to stuffed injectors it now costing me a pocket of cash to fix the piece of shit.
Hey i need some parts for my pathfinder 13570p; 13081p;15050
hi i had a Nissan Navara 2010 and makes little black smook what courses it
Hi what would you recommend when lifting the Navara for 2 inches by using the levelling kits? Do I have to change the suspension? And other stuff beneath the truck? Or what things should I be aware of before lifting it for about 2inches? Thanks.
REPLY
I mean the Navara D40
I had a 2 inch leveling kit fitted on mine. I was going to have a go at doing it myself but ended up taking it to a local garage - but was glad I did. The back spacers went in easily, but because mine is a 57plate it had a fair bit of corrosion on the bolts that held the front struts in. As I understand it, the 2inch leveling spacers have to sit on top of the springs in the recess that the stock suspension sit in.
The mechanic ended up having to buy a special 'nut cutter' tool to remove my bolts (these would normally be reused when fitting the spacer / leveling kit) thinking he could just use some generic strut bolts he had on the shelf. Problem is Nissan apparently dont use generic bolts on the struts, they use special ones that cant be bought seperately. So he couldn't put the front wheels back on...
At his point the truck was stuck on his ramp, in his small workshop holding up other jobs. Nightmare. I phoned Des who kindly put me onto a company that custom fabricates bolts.
Cost me about £300 for 2inches of lift - But it looks great. The differance is only subtle, mostly visible in the wheel arch space. In Hindsight I should probably have gone for a full after market suspension kit as I hear they are much better than the leveling kits (which still use the stock suspension). And another inch or 2 of lift - purely for looks :)
czcams.com/video/O8o_oP0sIvY/video.html
This is how my leveling kit works.The bolts I had problems with are here:
czcams.com/video/O8o_oP0sIvY/video.htmlm9s
This guy made it look easy cos the truck is brand spanking new.
Good day. My d40 2012 is having a problem my idling is getting low that sometimes the engine shuts down. I did check the maf it is cleaned. Did a diesel filter changed and oil filter got changed. Still the idle is low around 400-450rpm. I did clean the throttle body
Faulty EGR or clogged DPF .. i had the same issues with my Navara .. i highly recommend to remove the air intake while cleaning the EGR ..
I know this is an older video but I have a 2007 pathfinder with 200k km it has black smoke and had low power. I blanked the egr power then OK. It seems to run a bit rough at idle but OK at 850 or 900 rpm. I removed all injectors cleaned them and reinstall with new washers. Spray patterns looked OK with my basic test. If I remove the plug from each injector they all seem to have same effect on motor. If I remove any one plug for more than a minute the engine seems to Rev up to around 1200rpm even when I replace that plug it will remain at higher revs. I Rev engine and no black smoke but there is no real power until I switch off and restart then power back but black smoke returns. Any idea what to look for next?
It seems you need to get the injectors tested there’s 3 reasons of black smoke egr injectors and air filter and secondly the lack of power sounds like the SCV if you replace the SCV you will need to do a fuel pump reset and change the fuel filter Hopefully this helps you out buddy All the best Des
Nissan pathfinder 2.5d,turbo is not bosting...
The big pipe that goes to the intercooler is not expanding when I put the car on 3oo reaves..
I tried changing the vacuum turbo boost valve but it is still not boosting.
I removed mass air flow meter then it started showing a small difference positively.
So does this mean mass air flow meter need to be replaced or it can be something else?
Thank you
Other vids on this check out my channel
Hi Des ,live in Australia,not UK,I have a 2012 d40,it’s done 83000klms just starting to blow a little soot and using a bit more fuel,where do you reckon I start,injector service or carbon clean out.thanks in advance.Troy.
Troy Meredith Hi buddy I would get injector additive in full tank of fuel and a service we did a video on servicing All the best Des Also never let your fuel tank go below a quarter of a tank of fuel class that as empty
@@westyorkshireengineservice9160 Thanks Des ,Champion.
hi i have nissan navara d40 sensor of cam it broken maybe it problem of car not start
I’ve just done a bit of research on your company and it’s saying you have gone bankrupt and no longer trading. Is this correct??
Hie mate i have nissan atlas with qd32 engine and its overheating. One of the cylinders is misfiring can that be the cause of overheating???
I believe you are a zimbabwean. Any caused by cooling system not working properly. Cooling fan, water pump, thermostat or cracked pipes leaking. Simple diagnostics.
Then misfire problem in cylinder are many factors eg cracked cylinder head, worn headgasket on cylinder number 1, spark plug or injector.
My Pathfinder's turbo spits a lot of oil in the intercooler, and puts out a lot of black smoke when launching from stand still. What do you think i shoud check?
Thank you very much
Trade-in Value and then take it to a toyota dealer and leave it.
I would, like to how to exchange a engine of Nisan Novara d40/diesel
Have my eye on a nice 2009 pathfinder , 2.5l diesel, looks mint , manual, 100,000 miles.5,900 euro,sounds great but just shittin to buy a lemon, hear lots of issues about pathfinder . Anytips thanks.
kev d we
We have done a video a video on buying a lemon buddy
@@westyorkshireengineservice9160 Sound pal👍
Hello, I have pathfinder 2.5 diesel. Scv gives 29-31 mpa At idle. And the ECU has a task of 28. Is this normal?. The engine is very loud. Pump regenerated. New injectors.
Replaced the scv valve, nothing has changed. Now the idle pressure is 35 MPa
Maybe it is about the thickness of Black smoke when starting off. Black smoke when starting off. And with acceleration. Trottle stops as I accelerate. When I drive at a steady speed, the rattling returns.
When I drive at a steady speed, the rattling returns.
I have a new injectors, pump, scv, maf, map, closed EGR.
There are two problems. Loud, rattling noise like injectors and black smoke in first gear and accelerating. The engine is quiet when I accelerate and loud when I drive at a constant speed. Maybe someone will help?
If the Roads are being Salted Is It a Nissan Problem Or The Road Department Fault?
I have a navara that is randomly blowing bluish white smoke it often will completely stop if I shut it down and restart it straight away and it may stop doing this for a week or so then start again any one have any ideas why
Hi I have a 2007 pathfinder. It's blowing black smoke and is underpowered. The following was checked. Turbo seems ok but has low boost, vacuum pipes was checked. The mechanic seems to be a bit lost. Any suggestions? Thank you you videos are very informative. Nizaam
Nizaam Ryland . Could be the suction control valve or the injectors.
Clogged cat?
Did u fix your problem buddy
2008 Nissan pathfinder engine rebuilt new double row conversion will not run with cam angle sensor connected, replaced sensor no difference, connected hard to start, stops dead under a 1000 rpm. Without cam sensor connected starts straight away idles smoothly no noises
Nicole Hallandale timing is out buddy
That’s how you identify the vehicle in front of you holding up traffic!
All that black smoke , it’s obviously a Nissan
They call it Rolling coal !
how does diesel drain in to the sump, is it through the pistons
Hey mate, I need help... I've texted and called you through Facebook messenger but had no luck... Please reply
What causes a white smoke NISSAN NAVARA V6 PETROL
Cylinder head or turbo buddy
@@westyorkshireengineservice9160 okay so I should check those 2 cylinder n turbo, but it was on service they changed injectors n also done a major service but still smoking.
Mechanical job riddles
Mechanical job with
السلام عليكم
آلله يطيح حظكم على هيج محرك خايس..