@@lfeco Naa Trump and the grizzly gang that works his wicked will, including his neo-nazi white supremo's that tried an insurrection, hell any of his neo-nazi white supremo's would do for that matter.
I can tell you as a programmer that big tasks don't come about directly, they are a result of many other smaller tasks built on them. These machines evolved from simpler ones with more complexity added with every step
@@beamboy07 this channel is only for adults. Learn how to control your enemies, get revenge, rule the world. czcams.com/video/n7rjEEk7q9M/video.html this is magik from hell. Amen
About half the time we were seeing the carbon fibre weaving machines, they were actually weaving fibreglass or plastic lines. The carbon fibre lines were the black ones. When the lines were white, it would usually be fibreglass, or sometimes a plastic thread.
The cow part isn't cruel. Leaving them with overly long hooves would be cruel. The 2nd machine is VERY satisfying to watch. Even breaks metal effortlessly.
It is cruel not to do it since the cows are not traveling their normal terrain, the hooves are not naturally wore down. The excess length of hoof will in turn result in unnatural stride, muscle atrophy, and lameness. To include hoof based diseases resulting from the deteriorating of natural hoof hygiene. All of this applies to all domesticated hoofed livestock and private kept hoofed wildlife. Lastly, the same lack of erosion occurs to the teeth.
never thought I'd see my job on the list... I operate/program a tube laser cutter... mine is a Bodor 3000 watt laser and I routinely cut metal up to 9mm thick.
Funny, I think you're right about the cow hoof machine deal. The cows seem to be totally fine with it. They may have had it done before and therefore aren't afraid of it before and also know how much relief it gets from the trim. When my grandfather couldn't bend enough to trim his nails they'd get really long, to the point where he wasn't correctly walking and his feet would hurt. I trimmed them for him and, even though he was totally against it before during and even right after, he did notice less food pain and the next time they needed trimmed, he asked me to trim them for him. Shitty job but after the first time, he really appreciated it. I also enjoy watching the hot springs being made. They're made hot so that they'll keep their exact shape. There are machines that could roll them cold and some are but some types of material and spring types have to be done hot or the material will try to spring back for one and also heating aligns the grain structure of the spring steel making it a better spring. Something that big could be used for earthquake proofing something and it which case, it would have to be exactly right when it's done.
Its really not that pleasant. The farm I worked on had a hydraulic crush and often cow would lash out, It was a pretty terrifying machine to operate. We had a cow one day that had a dodgy leg put through the machine (you couldn't tell) and we wasn't told. The machine snapped its leg :(. The process needs to be done but I can assure you its not pleasant and the cows tolerate you working on them at best.
For a moment the narrator used his natural voice. What a relief, if only for a partial sentence. That 1980s morning guy radio pretense gets tiring in the first 20-30 seconds. Regardless, thumbs up for fascinating content.
Can you imagine this content creators voice during 'sexy times' with his Mrs/girlfriend, (In his dramatic voice...) "Prepare yourself Mabel, I am just going to enter you, now!..." Hahahaha 🤣🤣🤣😎🇬🇧
I have spent many many hours on CZcams watching hoof trimming videos! I had a couple horses years ago and I was amazed when the Ferrier would come by and re-shoe the horses
@@Auldbreck Animal husbandry ? You actually married them ? Only kidding . I like the idea of tree husbandry . I could get 'fresh' with a weeping willow .
The Braiding Machine with carbon fibre is amazing. Plus how to made a aircraft carrier. From the beginning to the end is super amazing. It takes incredible engineering and precision and time. Watching the time it takes is outstanding for the workers to watch.
Me: Plays video. Narrator: *"Unecessarily extravagant vocabulistics"* Me: Mutes and turns captions on. Narrator: *"Blocks screen with unecessarily exravagant vocabulistics"*
This is another reason I’ll never win the lottery ........I’d waste it on laser cutters and linear welders and have to buy a warehouse to have a shop for it all while all the other rich people own Honda elites
5:30 - Jokes on you, those cartridges are weed distillate cartridges. And as the dosages in those are, pardon the pun, high, a machine is the only reliable way to do that.
I had to mute the narrator. He sounds like those annoying disc jockey's from the 1960's who thought they were more interesting than the music people tuned in for.
Cow hoof trimming is fun to watch, but the cows don't really like it, although they don't all seem to get stressed by it. I like the upright crushes better.
I have spent time in my life as a professional announcer, working in Top40 radio. I have been asked, over the years, to define the term "Ron Radio Voice". I can now say that whatever is narrating this video is an absolutely perfect example of someone trying to sound like a professional announcer and failing miserably. They are a near-perfect "Ron Radio". My advice is to stop immediately, and let someone else talk for you. continuing to speak for yourself will damage the hearing of anyone near you. Much more restful than watching these machines in action was doing it in utter silence after muting the painful narration.
Hoof Trimming of cows: The farmer does not clean up or trim the homes themselves. It is a professional that trims the hooves. it is a very delicate job actually I am very skilled.
I used to do maintenance on the braiding machine different type called a 225 maypole wire braided had 20 24 and 36 carriers used to wrap stainless hydraulic hose for us air force pretty satisfying job
worked in a factory for a few years. oftentimes the machine setup, stocking raw material, carting away finished product-sometimes even stacking it [old machines] takes longer than the actual product run. lol. 2 hr set up - 1/2 hr for product ordered [+ a % for breakage, misaligned, damage in transit, yada] - then set up for next batch order. Still fun to watch the machine working. most fun like this - on video, not involved with set-up, filming, editing - just watch.
Watching this video is like watching a guy who knows how to say a lot of really long explanations of things that are completely unrelated to the topic and relating them in an odd way like with a professional grandma covered in spider webs.
I turned the volume to zero and that was VERY satisfying.
Lol
Absolutely
Great idea
Hell yeah..
Much better
I the same no cap
*"What would YOU throw into the crusher?"*
*The voiceover guy.*
Vladimir Putin.
He’s crying with his millions of dollars
Best thing in the crusher would be the narrator
(Not Andre) my ex.
Thanks for the laugh ! The
Or maybe Biden and Pelosi?
Facts.
@@lfeco Naa Trump and the grizzly gang that works his wicked will, including his neo-nazi white supremo's that tried an insurrection, hell any of his neo-nazi white supremo's would do for that matter.
Try to imagine the narrator talking like this to the family at home.
I'm willing to bet he doesn't have one...anymore lol
Or order at the drive-thru. 🤣
Yeeeeessss, I will have fries with thaaaaaat
@@800Viffer 🤣🤣😂
* watches video for fish getting crushed *
* it's just a picture *
I know right, that's some bullshit
Yeah that crossed my mind as well. Not so Zen.
Ditto.
That was the only reason I hit play 😆I wanted to watch the fish go squish
Fish tease
I'm always amazed at the people who actually design these machine and get them to work
I can tell you as a programmer that big tasks don't come about directly, they are a result of many other smaller tasks built on them. These machines evolved from simpler ones with more complexity added with every step
It's almost like getting an education...WORKS!
And that too on maintenance part is further satisfying n challenging 😀💖😭
I'm an operator at a candle factory. Setting up label machines and watching them work perfectly has to be a very gratifying experience
@@brennanmaynard4237 huh???
@@brennanmaynard4237 ur an adult and you're called hooded creeper
Bruh
@@beamboy07 this channel is only for adults. Learn how to control your enemies, get revenge, rule the world.
czcams.com/video/n7rjEEk7q9M/video.html this is magik from hell.
Amen
What does gratifying mean?
The narrator is the most satisfying in all of this video
I mute the volume and speed up the clip. That is satisfying.
The further you watch, the less satisfying the machines are.
About half the time we were seeing the carbon fibre weaving machines, they were actually weaving fibreglass or plastic lines. The carbon fibre lines were the black ones. When the lines were white, it would usually be fibreglass, or sometimes a plastic thread.
Im a machinist on mills. It still baffles me how powerful they are.
The cow part isn't cruel. Leaving them with overly long hooves would be cruel. The 2nd machine is VERY satisfying to watch. Even breaks metal effortlessly.
It is cruel not to do it since the cows are not traveling their normal terrain, the hooves are not naturally wore down. The excess length of hoof will in turn result in unnatural stride, muscle atrophy, and lameness. To include hoof based diseases resulting from the deteriorating of natural hoof hygiene. All of this applies to all domesticated hoofed livestock and private kept hoofed wildlife. Lastly, the same lack of erosion occurs to the teeth.
@@commoncorysense1809 let me guess you are vegan
@@algarawii true he vegan
@@algarawii as far from it as possible.
The cows seemed pretty relaxed, as if they knew it was beneficial
I have to give credit to the one who created these machines. Wow!! So smart
I think the commentary is probably the most funniest in this video.
The narrator has the most grating voice over emphasized drawn out words.
czcams.com/video/2JHFlvjscn8/video.html no, chills does
@@sloaneisenbart9347 WTF That narrator must be trying to sabotage the video. It's hard to believe it could be anything else.
This video healed me so much that my every bad memories had disappeared from my head. Thank you for making this successful video for me :)
There is something not so satisfying about hearing the word satisfying repeated a million times...
@@deanvanluven6813 Thanks, it is satisfying to read your comment too.
Especially when one of the machines, in my case the vape liquid filling one, was so uninteresting, not satisfying. Clashing with the narrated text,
Cows like the tipping machine, they like their hoof trimmed. I never seen a cow afraid to go in there unless its his/her first time.
never thought I'd see my job on the list... I operate/program a tube laser cutter... mine is a Bodor 3000 watt laser and I routinely cut metal up to 9mm thick.
The chain making and braiding machines were the most interesting to me
As a jeweller , I used to repair Sterling Silver and Gold chains . Couldn't do it now .
Video is hypnotizeing . Rise of the machine's. We're all doomed. Great video. Much love from Wheeling West Virginia.
Oh I've seen the cow thing before and this video was amazing love it keep up the good work.
Funny, I think you're right about the cow hoof machine deal. The cows seem to be totally fine with it. They may have had it done before and therefore aren't afraid of it before and also know how much relief it gets from the trim. When my grandfather couldn't bend enough to trim his nails they'd get really long, to the point where he wasn't correctly walking and his feet would hurt. I trimmed them for him and, even though he was totally against it before during and even right after, he did notice less food pain and the next time they needed trimmed, he asked me to trim them for him. Shitty job but after the first time, he really appreciated it.
I also enjoy watching the hot springs being made. They're made hot so that they'll keep their exact shape. There are machines that could roll them cold and some are but some types of material and spring types have to be done hot or the material will try to spring back for one and also heating aligns the grain structure of the spring steel making it a better spring. Something that big could be used for earthquake proofing something and it which case, it would have to be exactly right when it's done.
Its really not that pleasant. The farm I worked on had a hydraulic crush and often cow would lash out, It was a pretty terrifying machine to operate. We had a cow one day that had a dodgy leg put through the machine (you couldn't tell) and we wasn't told. The machine snapped its leg :(. The process needs to be done but I can assure you its not pleasant and the cows tolerate you working on them at best.
Thats an old school machine the new ones do it upright
For a moment the narrator used his natural voice. What a relief, if only for a partial sentence. That 1980s morning guy radio pretense gets tiring in the first 20-30 seconds. Regardless, thumbs up for fascinating content.
4:40 "It's a huge Flex to be honest"🤣 just tryna stay with the times.
its insane how 1 million people want to hear this guy's voice more
Turn the volume off
@@Cent4man i did but his voice got stuck in my head 😭😭😭😭
What's also kinda amazing is if you can watch the whole video without punching your screen listening to this.
Can you imagine this content creators voice during 'sexy times' with his Mrs/girlfriend, (In his dramatic voice...) "Prepare yourself Mabel, I am just going to enter you, now!..." Hahahaha 🤣🤣🤣😎🇬🇧
Mrs Jane is legit and her method works like magic I keep on earning every single week with her new strategy
Wow I' m just shock someone mentioned expert Jane I thought I' m the only one trading with her
She helped me recover what I lost trying to trade my self
I want to wake up one morning and find out
that my portfolio is $1,000,000 . I know it's
possible
Wow I' m just shock someone mentioned expert Mrs Jane I thought I' m the only one trading with her
She gave her clients nice attention
The engineers are the smart ones, they made the machines!...
Well....there you go. I never, ever would have thought watching operating machines would be a strange and cathartic experience.
TIP : Mute the sound before watching
It is amazing how few people were wearing safety glasses and equipment.
I have spent many many hours on CZcams watching hoof trimming videos! I had a couple horses years ago and I was amazed when the Ferrier would come by and re-shoe the horses
Voice over guy goes right in the crusher. Jesus wept!
Hoof trimming and other nasty cow related videos started showing my suggested recently. I can't stop watching them...
"What would you throw in the crusher?"
*you.*
love the video - the VO and banter I can do without- unless you like AM radio DJs :)
I couldn't select just one. Thank you for a fun, informative presentation.
Great job thanks
The "farmer" doesn't perform the hoof trimming. They are called farriers. They also trim horses hooves. The farmer has enough to do!!!
We always did our own cow's hoofs with occasional visits from a professional. It is all part of animal husbandry.
@@Auldbreck Thank you for setting me straight!! I'm sorry I put misinformation out there. Well gee, you guys do EVERYTHING!!! Bless you!!
@@Auldbreck Animal husbandry ? You actually married them ? Only kidding . I like the idea of tree husbandry . I could get 'fresh' with a weeping willow .
The twists in metal,,, I thought it was moulded that way!! Everydays a school day
THE CRUSHER... THE CRUSHER... THE CRUSHER! Umm, it's actually a shredder.
...and the "twisting" machine is NOT twisting metal "rods". The materials are metal "TUBES".
"kinder reminds me of that smart kid who no matter how little they studied always came out with great grades" lol
I only watched this too see the fish go through the machine. Glad i didnt have to wait long
Indicate the time were the fish is crashed … /:) Misleading Title , misleading imagery AND misleading comments as well .. LoL
The Braiding Machine with carbon fibre is amazing. Plus how to made a aircraft carrier. From the beginning to the end is super amazing. It takes incredible engineering and precision and time. Watching the time it takes is outstanding for the workers to watch.
1:30.
How could it be considered cruel?
It'd be cruel not to do it.
For me chain maker is still a fascinating one.
Laser cutting machine intricate work could have been be shown with some sample finished jobs.
If I had a lazer cutter I'd make animal cutouts. Thank you for your video.
Thanks youtube. Now I can’t tell if something is clickbait anymore
There were atleast 2 that I have personally used and wish the shop I work in now had them both.
What are the machines, and what do you do for work
Me: Plays video.
Narrator: *"Unecessarily extravagant vocabulistics"*
Me: Mutes and turns captions on.
Narrator: *"Blocks screen with unecessarily exravagant vocabulistics"*
What I want to see is the manufacture of the MACHINES. Who makes them?
Typically the automated machines are made by tool and dye makers, but other trades get involved too.
Basically it is a manicure for a cow. A cows hoof is nothing but a toe nail
The narrator sounds like he's narrating this video while on the toilet
Yeaaaa😉, he wants the "movie narrator" guys job.
I LOVE MACHINES!
I would try to throw a working crusher into the crusher to see who wins😂😂
The winner would be called Ashton.
@@trevormiles5852 why
@@hideninten Ashton crusher 70s show
They keep hiring this guy to narrate these shows.
You didn't bring up the machine that cuts steel with jets of water
I’ve seen enough videos of accidents involving these types of machines that I don’t find this satisfying at all.
The Narrator drives you Bonkers , the Machines are awesome to watch and wonder at .
i didn't make it past #13 before shoving hot spikes through my ears from listening to this narrator 😵💫
This is another reason I’ll never win the lottery ........I’d waste it on laser cutters and linear welders and have to buy a warehouse to have a shop for it all while all the other rich people own Honda elites
Can one crusher destroy another? That's a real question dude 🤣🤣
If you want a truly satisfying experience watching this video, then hit the mute button.
“This summer, coming to a cinema near you, Trout v. Crusher: The Final Countdown”
A lot of these machines doing their job ranks right up there with watching the grass grow!
I don't think I can ever use the word satisfying ever again.
It’s not a manicure…it’s a moo-nicure!
It’s not a manicure it’s not a Moo-nicure… it’s a moo-pedicure‼️
@@reoandbert Your comment is "udderly ridiculous". =)
Very very wonderful 👏🏼👏🏼
Bring the german language with a strong accent to these videos. That would be oddly hilarious.
crusher: "can crush anything"
me: "tosses in cube of tungsten"
5:30 - Jokes on you, those cartridges are weed distillate cartridges. And as the dosages in those are, pardon the pun, high, a machine is the only reliable way to do that.
"Fountain pen" this is the dumbest video ever
I only clicked too see the fish squashed and it was clickbait, I've fallen for it again😂
Id like to see what the crusher can do to a solid block of titanium.
Would just chew it up. High density steel is far faaar stronger than titanium but it would be an interesting battle.
this video is good about material processing.
I had to mute the narrator. He sounds like those annoying disc jockey's from the 1960's who thought they were more interesting than the music people tuned in for.
Cow hoof trimming is fun to watch, but the cows don't really like it, although they don't all seem to get stressed by it. I like the upright crushes better.
Had to stop watching, couldn't take any more of the smarmy voice.
This is the first time I've ever seen HAAS do anything well lmao
I would put my feeling in the crusher
absolutely lol
me too
I think a few of my ex’s would be good candidates
@@mattnoodles9338 wtf? U a phsyco?
Modern marvels, how things are made and work. Car hop trays from amazon.
The narrator uses the same voice when he is in foreplay with his wife.
I have spent time in my life as a professional announcer, working in Top40 radio. I have been asked, over the years, to define the term "Ron Radio Voice". I can now say that whatever is narrating this video is an absolutely perfect example of someone trying to sound like a professional announcer and failing miserably. They are a near-perfect "Ron Radio".
My advice is to stop immediately, and let someone else talk for you. continuing to speak for yourself will damage the hearing of anyone near you.
Much more restful than watching these machines in action was doing it in utter silence after muting the painful narration.
Heck yeah my dad makes cows live better and sleep better
The best thing in the crusher would be them vocal cords he sounds like a piece of sandpaper and another piece of sandpaper rubbing together
This has to be the worst narrator voice in the history of video commentary!
Excellent candidate for the crusher machine!!
Hoof Trimming of cows: The farmer does not clean up or trim the homes themselves. It is a professional that trims the hooves. it is a very delicate job actually I am very skilled.
Nice video.
I used to do maintenance on the braiding machine different type called a 225 maypole wire braided had 20 24 and 36 carriers used to wrap stainless hydraulic hose for us air force pretty satisfying job
1:31 haha that eye though .. whaaaaaat are you doing!!!!!!
Watching factory machines at 1.22 am hits different
if I was a cow just having to sit there I would prolly sleep tbh 🤩👍
This should be called 8 factory machines. As you have multiple instances of the same machines with just different tooling on it.
Factsopedia sure does Express a lot of opinions.
worked in a factory for a few years. oftentimes the machine setup, stocking raw material, carting away finished product-sometimes even stacking it [old machines] takes longer than the actual product run. lol. 2 hr set up - 1/2 hr for product ordered [+ a % for breakage, misaligned, damage in transit, yada] - then set up for next batch order. Still fun to watch the machine working. most fun like this - on video, not involved with set-up, filming, editing - just watch.
CNC LASER Machine is relaxing and amazing
Watching this video is like watching a guy who knows how to say a lot of really long explanations of things that are completely unrelated to the topic and relating them in an odd way like with a professional grandma covered in spider webs.
Congrats on 1 million