Cordoba Luthier Select Series
Vložit
- čas přidán 23. 02. 2020
- The Cordoba Luthier Select Series represents the marriage of peak instrument design and fine craftsmanship. Handcrafted by a team of elite luthiers in small batches, the Luthier Select series guitars bring new life to the designs that shaped the modern nylon string guitar. For over 15 years, Cordoba has been perfecting the art of Nylon string instruments, working in conjunction with teams all around the globe to bring authentic nylon string tone with the playability and longevity that a modern musician demands. As Cordoba has grown in tandem with the quality of their manufacturing, it is with great pride and satisfaction that Cordoba pays homage to the greats in luthiery with the release of the Luthier Select series.
- Hudba
These are beautiful. It's great to see some new videos. I own a C5, C7, and C10. I love them like little children. Thank you Cordoba
Cordoba, great sound, super like!!!
Thank you for doing this, so exciting and important!!!
Beautiful!!!!
I love my C-12 Cedar. Can't wait to try this new series. 🎸👍🎸👍♥️😁
Whoa - can’t wait to try one
Wow amazing guitar...
Great job.
Nice videos yeah !! I just scored a Cordoba 50 R , looks like its from 1999 , ( made in Spain by Cuenca , same as their 50-R ) great guitar find at $100. unused like new ,found her sleeping under a bed for like 20 yrs ha ,ha
Gracias Cordoba !
i had a bridge come loose i emailed them they finaly got back to me to correct the issue.thanks cordoba good job
I love the FCWE!!
I wish i have a guitar like this
I have a C12SP and a Friederich. I love them both.
You mean Cordoba Friederich replica or a real Friederich?
If it's the first one, is there a huge difference between it in tone quality, projection, resonance, etc... and the c12?
And is there any difference in feel, playability between this Cordoba Friederich and a real handmade luthier guitar at a similar price tag?I mean even a slight of a difference, like does it feel like a factory guitar every now and then or it always feels like a straightforward luthier guitar?
Thanks in advance
@@DanielNabyl Hi. Yes, a Cordoba Friederich copy. I'm sure there is a difference if not only in prestige and historical value alone. As for play-ability, tone and projection I can say the Cordoba Friederich isn't lacking. I've never played a Daniel Friederich so I can't compare them but I have played many handmade Luthier guitars and what Cordoba has done for this price point is very impressive. This guitar does not have the feel, tone or resonance of a factory made guitar at all. I wish there had been something like this when I was in college studying music.
Kind regards,
Hey Morris, which one would you say has the best volume? Thanks!
@@theosis9582 The volume is about the same between the two. The tone of the Friederich is warmer and a bit more expressive than the C12. The C12 is brighter but well balanced. I have mostly played cedar top guitars so I favor the Freidrich over the C12 but I can't say I love one more than the other. For the money they are both fantastic guitars. The only reason they are less expensive than other "luthier" made guitars is because they were made in China. The only thing missing from them is french polish if that is something you prefer.
Thank you for the comment and the replies are really helpful. I ordered a Friederich model as my upgrade to a 1st serious Classical Guitar because luthier made is out of reach in the place I live.
May I ask what strings have you experimented with for the Friederich and settled on ? I do like the Savarez that comes standard on most of their models but would be nice to hear your input :)
I Verry like Cordoba. Chanel
Just not into a flamenco sound and this one resonates with me. Did own a Taylor 64ce-N , however fail to grasp the ability to play.
Blast dab it I’m still going to try.
Pure wooden ❤️
The folks at Cordoba need too be commended for their commitment too(largely) the nylon string guitar.It is a much smaller market then the steelstring cousins.They work hard too bring the nylon string too many levels of players and budgets.Price points are connected too the labor cost of a country.The endless bashing of Chinese production and craftsmanship is tiring and unfounded.They have always excelled as artisans.Spend some time on google or your local library and some of the American arrogance of superior craftsmanship will quickly diminish.Countries have different strenghts .Lets hold up the good that people do,instead of filtering everything thru an "us versus them"mentality.I smile when i pick up my American,Irish and ,yes,Chinese guitar.Keep up the good work.
That is well stated, sir. I hope more people will have an open mind in the future.
Are there any options to the poly urethane? Is it possible to put on a super thin finish like even the low end Taylor models have? That would be my preference.
Currently I own C10 Crossover and I love it, I want to get another one higher. Should I go all the way to Cordoba Hauser or C12 or Cordoba Frederich?
Thank you in advance for your advise!
Esteso ❤
Looks great. Can I get one for about tree-fiddy?
I LOVE CORDOBA GUITAR...too bad ot very expensive after arrive in my country
Exactly
Is there an equitable flamenco guitar?
I have a cordoba luthier select series Torres! I’m quite curious if it’s an Englemann spruce top?
Don’t know about all that but I can guarantee it’s MADE IN A CHINESE sweat shop somewhere in Singapore 🇸🇬
@@myfriendpetePretty damn good guitars, even if it’s made in China. Extremely good quality.
Sir I want to learn how to make guitars!
Where are you guys from?
Would a beginner regret buying one?
Enjoyed the sound much better than the c10, c9 or c12.
You will grow into it, where you will outgrown the lesser models.
Is that factory Martinez?
I don't think so. In Australia, Martinez is sold as Katoh. I just bought a $450 entry level katoh flamenco over a $700 Cordoba! The lower - mid Cordobas are very ordinary. You can do better for the money.
:)
Any videos for demo friederich model
czcams.com/video/9RlmjAl6FXc/video.html
Sir, which guitar do you recommend for me to buy? My budget is 3000 dollars.
By Yamaha
The guitar playing prelude villa lobos is too short .can listen clearly
Music ? 1:12
Villa lobos prelude #1.
Just got the cordoba c10 crossover. It Should turn up today. 1 little niggle is that i just found out they was made in China. Not the happiest as it was a little over £1000.
Regardless ill see how it is when it turns up.
So, is it a good guitar?
master builders in China are exceptional at their craft.
@@glennalexander220 I have that exact guitar and it is exceptional for the price. It hits way above its cost. Spruce does take time to settle in. But thats what im into.
I was told " A great guitar doesn’t make in China". I dont know is correct or not!
soooo incorrect. Chinese MASTER luthiers are among the best in the world. You can get great guitars or crap guitars from any country...research of the company and their practices are worth the time investment!
i have a CORDOBA acero series d10ce,great sound,beautiful, but top of it cracked,i would really think about the quality of Cordoba,is a lot of money to spend on a guitar that will last only a few years.
La nueva guitarra córdoba stage el Ajuste de fábrica es muy malo biene muy alta los 2 nut el previo Fishman da problemas por bajadas y subidada de volumen oscilaciones de las cuerda no suena por igual. La cuerda 1 en el traste 12 se escurre y se sale del diapasón debido ala estrechez del diapasón el nut de la mano derecha está lijado en forma de arco perjudica la rapidez de las escalas rápidas y punteos mejor lijado recto o ligeramente en progresión y demasiadas piezas encoladas están echas a trozos. La parte de atrás 2 piezas cuando tendría que ser 1. Como la gibson chet atking.
Hi.
I have a question about the manufacture of Cordoba guitars. Where are they made in the USA or China? A cordial greeting.
china-usa-spain depends on model
Don’t ya just love the way the guy HARD SELLS you MADE IN CHINA go be like the BEST IN THE WORLD AT 2:45 What a total let down. 😩😩😩😩
I was about to buy a luthier select until I found out it was made in China. I went with the Alhambra because it is made in Spain.
That was a big mistake. The Alhambra's cannot hold a candle to the high end Cordoba line. I've played both and have owned several classicals ranging from $5k to $10k for comparison. There is no comparison. Kenny Hill's China factory is rock solid, and their attention to detail blows the doors off the Alahambra factories. I have owned 2 Kenny Hill concert models out of his shop in California and several of the mid range Cordobas in both Spain and China for comparison.
@@seancasey5024 I’m glad you pointed that out. Otherwise it seems like he is biased based upon the country of origin and its connotations and stereotypes.
I owned a Cordoba made in Spain super excellent quality , the Chinese one was terrible
Had me at making them in Spain, lost me making them in China...
China today? Im so sad because of covid-19 :-(
Loved till I heard the speech for transporting jobs to China. Money grabbers.
Everything they said was selling until I hear China.
If they have trained some very good luthiers in Spanish making techniques, that's fine with me!
@@luc5798 china is mad unregulated and the wood is not the same the quality and technique is not the same with the mass production and low wages allowed in china
Chinese are some of the smartest and hardest working people on the planet 😂
The reason China has a bad rap is not from the craftsmen, but because they are known to use the cheapest materials, fiberboard instead of wood,cheap alloy instead of strong metal, But if you provide them with quality materials and accurate instructions then you will get an excellent product.
spanish guitars made in china but sold in america. aint that funny
Cordoba is great about making really nice guitars but they have to work a lot on marketing and demonstrations. Just selling good amount of guitars does not mean that you can sell 3 times more than you are currently selling, with some proper demonstrations, marketing and pricing strategy.
For example we ca never see electric nylon string guitars played in different equipments etc. Most of the so called acoustic amps sounds terrible. Guitar jack to the amp, amp to the external good sound card and computer managing all the sounds usually sounds much better, especially video etc. sound recording. Even Guitar jack straight into a very good external sound card and a computer (with good monitors/Speakers) probably sound much better than most of the amps. However. Cordoba never actually properly shows as all these different options to get a sound from the Cordoba guitar. Acoustic demonstrations are quite good but % 99 of them too short.
Cordoba could sell may more guitar than they are currently selling.
More yıou sell, cheaper it gets to produces per unit of the guitar. Cheaper it gets to build a guitar (Without sacrificing any kind of building quality! Material etc. also gets cheaper more you build, so the quality increases even more), easier it gets for consumer to buy it and there you go, you become the number one guitar selling brand in the world that sales massive amount and dominates whole market.
However, Guitar market is so empty, complicated and unbalanced, non of the brands actually pushes hard enough to get to the top of that market. Electric guitars dominated by Gipson. If you even ask any person that has no whatsoever interest in the guitars or music, probably would say "Gibson" is the electric guitar brand they know. Even Gibson actually not pushing hard enough to become the coca brand, marlboro etc. of the guitar market.
Corcoba should find a way to sell C5-CE under $200 USD (Without sacrificing wood, build, material etc. quality at all) all over the world so everybody from beginner to pro player or somebody not even thinking about playing guitar will buy it no matter what. In the USA and EU around $450 USD for this guitar is not too bad! However, resty of the world US Dollar and Euro currency keep increasing daily. One day $100 Worth 120 İn your currency and next week it becomes 700 in your currency! So the guitar (Or anything) you buy, goes 7 times more than it is within a week! (Beside USA, UK, Germany, Canada, Saudi and United Arabs, USA dollar worth average 4 to 10 times more than local currency in whole rest of the planet! So, any person in those countries buying products average 5 times more expensive than the person in those listed countries)
Yamaha and Honda for example, have great simple strategy about that. They sell their motorcycles cheaper than they sell in USA and EU and/or simply build a factory (Those produces entrance or mid class vehicles, manufacture high end expensive products in the USA, EU etc.) in those countries so manufacturing (labor) cost way cheaper, so the products cost cheaper to buy. They ship these bikes into USA and EU, which makes mid or lower end products even more affordable in the USA, EU, Canada etc.
However, may brands thinks that they are too smart and trying to do this strategy with building products in the India and China, which completely ruins all of the products and also the brand name, reliability etc. Also, shipping products into the EU, USA, Canada etc. becomes expensive and time to ship it becomes too long! Additionally, these countries do not give a shit about brand rights, copyright etc. As soon as they start manufacturing a products for a brand, they imidiatly make hundreds of fake versions of it and completely ruin the market, as well as ruining the brand names! No person would like to see "Made in China or India" label on a guitar.
However, there are alternative countries like Ukraine, Turkey, Bulgaria, Romania etc. Those very close to EU, have proper international copy, right, branding etc. rules, laws and regulations, labour is way cheaper than EU, USA, Canada etc. but manufacturing quality is 10 times better than China, India etc. Indeed, Ukraine and Turkey is great about producing all kind of goods in very good quality with very reasonable prices, while Ukraine has great and cheap wood products quality and Turkey have great manufacturing, designing, producing capacity at anything from textile to most advanced defense systems and so on.
Corcoba will also make very high end classic, flamenco etc. special guitar (thos have "made in Spain" label on them), which will get up to prices like $5000 USD or more, which will bring the actual profit.
They need to reduce their price to a level appropriate to the quality of the guitars. They are over-priced. You can do better for the money.