BMW M3 & M4 RGBW DRL Mod (F80 F82 F83) - Set your M3/M4 apart!
Vložit
- čas přidán 25. 07. 2024
- Looking to take your F8X M3 or M4 to the next level? Our brand-new RGBW DRL modules for the F8X LCI2 are the perfect upgrade for you - featuring an easy install process (without having to change your headlights or open up your OEM headlight assembly), these modules will transform the front end appearance of your F8X by allowing you to customise your DRLs to whatever colour suits your mood!
Compatible with all 2017-2020 M3 F80, and M4 F82 F83 with LCI2 LED adaptive headlights.
🌈 Get yours now: bit.ly/4aBFj5F
✅ OEM functionality retained (White daytime lights, Amber indicators)
📱 Mobile app can be used to override the default white daytime lights for RGB colours
🔓 Vehicle unlock with welcome colour effects (This can be changed via the mobile app)
🟦 Comes with a bluetooth controller which will require wiring (12V power and ground)
💻 No coding required
❌ No errors
⬅️ Fully reversible to OEM
- Chapters -
00:00 - Introduction
00:20 - Remove Front Wheel
00:40 - Product Overview
01:14 - Wire and Install Bluetooth Controller
01:52 - Splice and Solder Module to Factory Harness (Brown Wire)
02:13 - Splice and Solder Module to Factory Harness (Red Wire)
02:21 - Mounting the Bluetooth Controller
02:57 - Feed Wiring to Top of Engine Bay
03:20 - Remove DRL Heatsink
03:50 - Remove Factory DRL Module from Heatsink
04:49 - Installing the New DRL Modules
05:50 - Repeat Process on the other side
06:02 - Wiring the Control Wire to the Factory Harness
06:17 - T-Tap Instructions
06:42 - Install the DRL Module Ribbon Cables
07:03 - Plug Factory Harness into New DRL Modules
07:15 - Reinstalling the Heatsink
07:35 - Run Ribbon Cables to the other Headlight
08:22 - Install the DRL Module Ribbon Cables (other side)
08:44 - Reinstalling the Heatsink (other side)
08:55 - Tidy Any Wiring
09:08 - Front Wheel Back on
09:21 - Showcase
09:34 - iilumo Command App
09:53 - Startup Animation
💳 AfterPay & Zip Pay Available
🔧 Installation Available
🇦🇺 Australian Owned & Operated
🌐 www.iilumo.com
📞 1800 003 888
📍 22 Atlantic Drive, Keysborough, VIC 3173 - Auta a dopravní prostředky
One of the cleanest installs I have seen, so many people connect them straight to the batter and leave wires all over the place, shame there isn't a way to have a piggy back harness that plugs into the original one
Hello ! Where does the white cable come from that you install on the plug with the + terminal? because my white cable is connected directly to the red cable of the plug
Where you connect red cable?
Love the lights! Does this work on aftermarket IKON headlights, non-OEM ones? Thanks
This only works on OEM, as the aftermarket headlights don't use the same modules unfortunately
Hello, I love these. I have a '17 F82 M4 with Adaptive LED headlights. They are non-IKON though, will these work?
Please send a photo of your headlights to our team on support@iilumo.com and we'll provide you links to the correct module for your headlights :)
Hi, is this tutorial applicable for an F90 M5 (pre LCI). Thanks
This method may apply for the F90, but we can't confirm until we get one in to confirm the wiring.
Do I have to extend the white wire by myself? Mine is very short and like a loop connected back to the controller. Please help.
Please get in touch with our team for assistance - support@iilumo.com
Did you get an answer to this?
@@RyanWilliamsonTM please get in touch with our team - support@iilumo.com if you require assistance. There are 2 options, but in short if you've already wired yours, it's far quicker to just extend your current white wire if yours was shipped with one that has a loop.
Do you have this kit available for the Pre LCI F30 xenon headlights?
Yes we do. Best to send a photo of your headlights to our team to verify and provide you with the link to the modules - support@iilumo.com
Hello my friend. After locking the car, the headlights don't turn off, can you tell me why?
It may take a little while before it turns off as the circuit used takes a little time for it to completely cut-off power.
so what happens when i drive off, will they return automatically to white?
It will not automatically switch. It will stay on the selected colour until you change it again via the app.
Would this work for Bmw f30 LCI
We would have DRL modules for the F30 LCI, you would require a different set. Please reach out to our team at support@iilumo.com with a photo of your headlights, and we'll be able to send you a link to the correct DRL modules suitable.
F87 LCI is exactly the same way to do it?
Not the exact, similar way though. We will have a tutorial for that coming up soon
What is the app called? I can’t get the QR code to work
It's called "iilumo Command"