Oh how I wished I'd took up motor mechanics or anything to do with autos as a young man. If I could re-do anything in my life, An Auto Mechanic would be on the top of my list.
Steering drag link tie rod replacement? One tie rod end screws on but the other side is welded with no visible way to remove tie rod or install one? Do I need to buy entire drag linkage new
WOW!! You like crazy Rigs in 1:1 Scale too I see! That's quite a build.... not much Samurai left!! Doesn't look like the cute little wheezer motor either! That suspension is crazy impressive as well. That MUST be fun!! My friend and I built a Samurai around 1990. We were much better racers than crawlers back then.... We just reinforced the chassis, added CJ axles, Trans and gearbox - and a 3.8 litre, Turbo Buick engine out of a Grand National. 😲😲 Believe it or not, TOO MUCH power is actually possible! On the slightest incline, if we hit the throttle a little too hard - it would BACK FLIP!!!! 😁 😕😲😲😲 Looks like you did it right. ~ Carmine
That thing cost me an arm and a leg and another arm and another leg and another arm and another leg and another arm and another leg ... stop? I eventually sold it - not complaining - was good fun - was great watching it being built and was good fun driving it - but like everything else it has a time frame and that ship sailed now...... and moved on to more manageable cars, hence: RC Cars :)
I REALLY understand that! I was a Drag racer, and also did oval Modifieds and Sprints.... BIG money pit! However, I wouldn't change a thing if I could.
Did u build this in India because i can see "gypsy" badge on rear replacement door and "Maruti" badge on the replaced hood ? Samurai is sold as gypsy in India.
Built in Malta. We have the Maruti Gypsy here - the rear door and the whole front part of this Suzuki is from a dismantled Maruti Gypsy. It was cost effective to get these and use them and sell off the original Suzuki parts :)
I know it's late , but those tires are called extreme trackers right ? who makes them ? any info would be appreciated . Great job on the Zuki !!! It looks like a Beast!! Dont know where in the world you are , but here in Nevada USA , I cant find any info on these tires. Thanks for your time , I subbed , Peace Bro !!
The tyre is an "Insa Turbo" by brand and the model, if I remember well, is "Special Track" - but it has been a few years now and I am not 100% sure about the model name!
If you are going to start a new project it would be good if your donor car was in good shape but then it can also be repaired - depending how far you want to build yours, most of what you have will be replaced anyways!
The Samurai has King coil over shocks in both front and rear and were ordered specifically for it to ride that high, with the ability to change the ride height and stiffness.
S30Uploads Will not need a map - small island lol - better food than beer lol - this is where I'm at :) www.google.com.mt/maps/place/Ba%C4%A7ar+i%C4%8B-%C4%8Aag%C4%A7aq,+In-Naxxar/@35.9386827,14.4552183,3690m/data=!3m2!1e3!4b1!4m7!1m4!3m3!1s0x0:0x0!2zMzXCsDU2JzIxLjEiTiAxNMKwMjcnMTkuMiJF!3b1!3m1!1s0x130e4f99110a2a09:0x508995f71142a5c9
Blaž Benčič What's in a sum? Labor cost here could be totally different from your there - just imagine, I could have bought a new car complete with trailer !!!
so 15k dolar. i wouldnt go as extreme as you i would weld the chasy with co2 and i would put some tar(katran) on it. i would buy bigger shocks and tires and fix the body work and paint it i would do it by myseld and my dad
Well done, perfect car... what axes do you use? are front and rear axes with locking diff? possible to built one for me,? if so than could pass my contact details for private chat?
Piękna metamorfoza 👍❤️
Thank you :)
Wow thats top notch custom building there. Definitely subscribing! I bet its gonna be hard to stop that lil beast. Thumbsup
Thank you for your encouragement :)
Thank you for the inspiration.
Absolutely incredible job!
Thank you for your kind comment!!
Very cool vid. Looks like a ton of work went into that project. Looks like a beast.
Thanks for sharing :)
Joe Conti absolutely thank you. Do you do ur own work?
slip knot Nope - if i did I'd be richer but with a broken back hahahah
Joe Conti well hats off to whoever did the work! I really like that samarai.
wow love it! u did a great job!
+Hugo Duran Thank you :)
Gorgeous... just gorgeous!
Thank you :)
Very good job, you have been great. thumbs up
Very glad you like :)
Nice work pard sweet Lil sammi!!
+CAT POWER (ALLDAY) Thank you :)
Far as I could say, that's a tiny monster in its class. Weight, horsepower, price, off-road u know. I simply like this machine.
Thank you :)
@@JCRC here in India, we all missed the original susuki made engine. Maruti has shredded her
We have them both here - the SJ410, SJ413, SJ80 and the Maruti long wheel base
@@JCRC u guys are lucky. Have fun. 👍
that is awesome buddy..theres a lot of work done there..but the out come is 100% kick ass
Goddamn right Ramsay!!! Lol throw a boat under that bad boy and float it here. I got trails for that rig...
slip knot ha ha ha u got that right..
Ramsay slip knot Tell you what - you come here and you can drive it yourself! You can also put your stickers on it lol Deal?
Joe Conti DEAL..Let ya no when I got the ticket :)
Joe Conti deal!! Haha
that's awesome I'll definitely be getting one haha
Great job man!
Thank you :)
Nice! Thanks for posting.
+Tom Nelson and thank you for watching :)
Великолепная работа! Я впечатлён.
+Миkaэл Лихманов Спасибо. Цените ваш комментарий.
WOW! NICE WORK!
rc suzuki samurai Thank you :)
really amzing machines, congralatate my friend
Thank you :)
Great build. Miss my1988 sammi. They are a fun rig
Thanks .. sold it since then .. miss it too!!
Oh how I wished I'd took up motor mechanics or anything to do with autos as a young man. If I could re-do anything in my life, An Auto Mechanic would be on the top of my list.
It is never too late!
Thank's my man!
@@macreal65 Plenty of time. Did you get into cars?
@@ra-dg5rf when I turned 50.
That’s bad ass!!
Thanks :)
Oh! I 💖 it!
You have gold fingers man. Amazing.
+Cyril Hondo Thanks :)
very nice build,
Thank you :)
perfect thank you very much!
Welcome :)
have a Suzuki Samurai and I want to fix it up like you did, I want to know how much it cost you? Thank you
Steering drag link tie rod replacement? One tie rod end screws on but the other side is welded with no visible way to remove tie rod or install one? Do I need to buy entire drag linkage new
Impresionante!!!
+Serg Orton Thank you :)
this lil samurai is a monster
+lxH8xURxFACE Not so little when you stand next to it :)
+Joe Conti suh dude !
you are a legend...
lol
beautiful rig
Thank you so much :)
Nice work
shane lord Thank you :)
WOW!! You like crazy Rigs in 1:1 Scale too I see! That's quite a build.... not much Samurai left!! Doesn't look like the cute little wheezer motor either! That suspension is crazy impressive as well. That MUST be fun!!
My friend and I built a Samurai around 1990. We were much better racers than crawlers back then....
We just reinforced the chassis, added CJ axles, Trans and gearbox - and a 3.8 litre, Turbo Buick engine out of a Grand National. 😲😲
Believe it or not, TOO MUCH power is actually possible! On the slightest incline, if we hit the throttle a little too hard - it would BACK FLIP!!!! 😁 😕😲😲😲
Looks like you did it right.
~ Carmine
That thing cost me an arm and a leg and another arm and another leg and another arm and another leg and another arm and another leg ... stop? I eventually sold it - not complaining - was good fun - was great watching it being built and was good fun driving it - but like everything else it has a time frame and that ship sailed now...... and moved on to more manageable cars, hence: RC Cars :)
I REALLY understand that! I was a Drag racer, and also did oval Modifieds and Sprints....
BIG money pit! However, I wouldn't change a thing if I could.
Nor would I - I would do it all again :)
Amen to that brother!!
Over 100,000 views. Thanks you :)
***** :) :)
400000 +
Nice build bud.
Thanks for that :)
Joe Conti No prob. Feel free to check out dirty d's rc on youtube. Some vids of my modded losi mrc in my back yard rock course.
Dirty D's RC Subbed
if i put a 33 inch wheels....what kind of used axels should i use ??
lada niva ?
or somthing else ?
On mine I used the Toyota Hilux LN6 series axles.
Ha ha love the vid mate
***** I figured that :)
sweet
Thank you :)
Hey buddy.. great looking ride
please think about doing a video detailing and reviewing your mods
or a list at least :D
thanks
Since then I sold the car sorry! Would have been nice to put your request up!! :)
Man.. Really wanted to know what else you had under there :D
Thanks and all the best for your future 1:1 offroader
Yogit Goresia Maybe this one will help :)
czcams.com/video/EDcOHxXKgjQ/video.html
Nice to see someone building a samurai right instead of molesting it in thier shed out back.
That's a few years ago now :)
what should I be looking at to pay for a decent one ?
Well in Malta you're looking at around €4500
Did u build this in India because i can see "gypsy" badge on rear replacement door and "Maruti" badge on the replaced hood ? Samurai is sold as gypsy in India.
Built in Malta. We have the Maruti Gypsy here - the rear door and the whole front part of this Suzuki is from a dismantled Maruti Gypsy. It was cost effective to get these and use them and sell off the original Suzuki parts :)
Whats the difference between sierra and the samurai?
+bestian4 Same car - different name in different countries. Read this:
www.wikiwand.com/en/Suzuki_Jimny#/Second_generation_.281981.E2.80.931998.29
ได้ดูวีดีโอคุณแล้วผมชอบมากได้ความรู้จริงๆขอขอบคุณที่แชร์ครับ
ขอบคุณมาก
ahh shit that sucks still an amazing samurai though I wanted a jeep again but might have to look for one of these beasts now haha
They are great fun, even as an everyday run around (not this one - have another road worthy one) good all around fun
What axels are u using
Hilux?
BAJATWIN Hilux front and rear yes
whats the title of the first song. . background music
joel andao Go to czcams.com/users/audiolibrarymusic and search for Parasail by Silent Partner
How long did it take you to build it
Close to 3 years
I want too dude.. Don't u have full video
You just watched it!
Tintop = win
Thanos Thank you :)
I know it's late , but those tires are called extreme trackers right ? who makes them ? any info would be appreciated . Great job on the Zuki !!! It looks like a Beast!! Dont know where in the world you are , but here in Nevada USA , I cant find any info on these tires. Thanks for your time , I subbed , Peace Bro !!
The tyre is an "Insa Turbo" by brand and the model, if I remember well, is "Special Track" - but it has been a few years now and I am not 100% sure about the model name!
how much and were do you live
+Frank Smyth Sent you a PM
Is it for sale?
Come take it for a test drive and if the offer is interesting, I'll consider it. EVERYTHING is for sale my friend!
What was the first song?
"Parasail" by Silent Partner available on CZcams audio library
Omg. My friend can you do the same, with sj410?
If you wanted to
Me, I want but our sj410 is 31 years old and everywhere it has got problem but I think this jeep someone must to fix it.
If you are going to start a new project it would be good if your donor car was in good shape but then it can also be repaired - depending how far you want to build yours, most of what you have will be replaced anyways!
ok bro in some years I will trush very hard
How much did you spent?
A LOT!!!!
Can you please describe kemm what's a lot habib??
俺のジムニーより凄い‼️
格好いい👍🏻👍🏻
ありがとうございました :) :)
music please
+Mário Galba Free from CZcams
Mother of god
Pray for us!
JIMNY NICE!
What lift kit is on this?
There's no lift kit on this, as you would have noticed in the video
Joe Conti RC so you just gained height from the suspension?
The Samurai has King coil over shocks in both front and rear and were ordered specifically for it to ride that high, with the ability to change the ride height and stiffness.
How much cost you the renovation?
A LOT - FAR TOO MUCH THAN I CARE TO REPEAT LOL
I have a car like yours and i wanna know how much that cost you because I want to Renovate the car like you....
Joe Conti answer me I beg
How much money was spent on this?
+bestian4 Too much!!!
wow.... glad you have a passenger seat!
S30Uploads You and anyone else here is welcome to come for a ride!
Joe Conti I'll pay for gas, beer and a map! Where are you from anyways? I saw you on RC FPV vids and thought I'd come troll your channels vids.
Joe Conti hahah i can tell from your Lic.plate you are nowhere near Southern California!
S30Uploads Will not need a map - small island lol - better food than beer lol - this is where I'm at :)
www.google.com.mt/maps/place/Ba%C4%A7ar+i%C4%8B-%C4%8Aag%C4%A7aq,+In-Naxxar/@35.9386827,14.4552183,3690m/data=!3m2!1e3!4b1!4m7!1m4!3m3!1s0x0:0x0!2zMzXCsDU2JzIxLjEiTiAxNMKwMjcnMTkuMiJF!3b1!3m1!1s0x130e4f99110a2a09:0x508995f71142a5c9
im only about 6,715 miles away! you weren't kidding, it's like a tiny spec on a world map...
Couldn't watch it. The steering wheel was on the wrong side and it made me dizzy.
hahahaha
What year is this Samurai?
1988
Joe Conti RC thx i thought is 1991.
How much spent pls tell me.
Blaž Benčič What's in a sum? Labor cost here could be totally different from your there - just imagine, I could have bought a new car complete with trailer !!!
so 15k dolar.
i wouldnt go as extreme as you
i would weld the chasy with co2 and i would put some tar(katran) on it.
i would buy bigger shocks and tires and fix the body work and paint it i would do it by myseld and my dad
need to take thoughs fenders off lol
Agree but cannot on our roads
Well done, perfect car...
what axes do you use?
are front and rear axes with locking diff?
possible to built one for me,? if so than could pass my contact details for private chat?
+Gocha Kupradze My Samurai is up for sale - contact me for details if you like!
+Joe Conti gocha.72@gmail.com please send car details with some photos , country origin of shipment etc, we can talk about price in private, thanks
+Gocha Kupradze Email sent
Que neumático es
www.4x4tyres.co.uk/265-75-16-insa-turbo-special-track-mud-terrain-112q_0302071720003
Not Suzuki samurai it sj410
Originally was a Suzuki Samurai SJ413
estaba quedando bonito, hasta que le pusiste esas bucheras horribles
It is the law here to have it on the road. I agree with you!
Ghal bejh jew?..hah
Mhux hekk!!!!???
It's auto tho
Street legal - thanks for watching!
z
A
My land rover sh* ts SJs
***** You must be feeding it a lot of SJ parts!
2nd song ACDC ripoff!
Alex Cole CZcams free to use music.
Nice work
Thank you :)