Cool video and dragster! Guys, I'd suggest an introduction video telling who you are and what your plans are for the channel. If I didn't already know Slick 50 from Puddin's videos I'd have no idea who you are and what the channel is about.
Check the tuneup before you hurt it, the EGT's are way too hot. The flat spot stumble isdue to not enough pump shooters. If you don't know how to read read plugs on alky put a pyro in #7 pipe, 1150 - 1200 is safe. 40 deg total timing to start out. Welcome to the past.😎
CLAY MILLICAN WILL BE YOUR FRIEND IN TF, MERLIN AND SHIN WILL BE YOUR FRIEND IN OLD HOT RODS, AND FAB RATS AS YOUR MIND EXPANDING FUNNYNESS AND FABRICATION
You guys need to come up with some of your own designs shirts and merch! both you sporting the puddins fab merch! here for the support! wanna see the front engine drag go down the strip slick 50!
you need one of them muffler hanger remover tools to get them old shocks off there. Not much money for the hassle it saves. Great to see Slick and not sure who this Charlie is but hey, a guy with a clapped out f body cant be all bad. Keep up the great work. Looking forward to metal working how to. I watch Make It Kustom with Karl Fisher and if yall teach half of what I have picked up from him It will be great. Definitely need some tig how to and go ahead and film that chop fix on that five window. Thanx!
Good luck on the channel guys. My only suggestion would be to use wireless lav mics on both of you because when you're not right next to the camera or talking while not facing the camera, your voices don't get picked up very well.
We'll throw the conventional shack. The only work one direction, if they're a gas shock, they worked both directions or I should say they've got pressure on ithey. Basically, you have to push like hell to get them to compress.😂😂😂
Slick the older tipe of shock hasn't have gas in them . To bled the air out of them keep them upright bo it on its side you pout air in valves hope it helps you
Charlie and Slick got some learning to do, I am here for it. Looks cool so far. I like the music and video editing in the videos I have seen. Let's Go! That Dragster is too freaking cool!
Roadster has a m20 Muncie and the dragster has a 2 speed power glide. The power glide grenaded on the 3rd pass, but Joey loaded another one in for more testing. 😎
Man I’m so glad slick started this! Love it already.
Heck yes, Bout time Slick started a channel. 👍
Poor Charlie ain’t gettin no love- most comments calling it Slicks channel but Charlie’s killing it! No hate on Slick, he’s cool too.
None of that matters to me. I am so happy to see all the love for Slick 50. It's amazing. Puddins army showed up big!! Thank you 🙏🏼
Cool video and dragster!
Guys, I'd suggest an introduction video telling who you are and what your plans are for the channel.
If I didn't already know Slick 50 from Puddin's videos I'd have no idea who you are and what the channel is about.
Thank you! Definitely need to work on that! I appreciate your advice. 😎
Pumped that Slick 50 finally gave in to the CZcamss!! 💪🏻🇺🇲
It might take awhile for us to figure this deal out haha! Glad you are here! 🇺🇸
PUDDIN GOT YOU!!! CHOOSE AN EDITOR WELL, AND YOU MIGHT TAKE OFF REALLY FAST..... DO WHAT YOU DO, AND LET THE EDITOR ENHANCE YOU!
I always said Slick 50 should have his own channel. Im so glad he finally did it. I cant wait to see where this goes. Subbed with in a second.
Good morning from Cape Cod ⛵ you guys are killing it Charlie and Slick. I'm loving the drag content 👍✌️🇺🇲
Here for the support go slick 50...
Thank you for the support!
That’s right Charlie 💪🤠
Yes!
That's old school. A digger being pushed by a three wheeled golf cart.
Check the tuneup before you hurt it, the EGT's are way too hot. The flat spot stumble isdue to not enough pump shooters. If you don't know how to read read plugs on alky put a pyro in #7 pipe, 1150 - 1200 is safe. 40 deg total timing to start out. Welcome to the past.😎
Sounds like you have been here before!! Really good info! Thank you!
CLAY MILLICAN WILL BE YOUR FRIEND IN TF, MERLIN AND SHIN WILL BE YOUR FRIEND IN OLD HOT RODS, AND FAB RATS AS YOUR MIND EXPANDING FUNNYNESS AND FABRICATION
And with you as ALWAYS, PUDDINS FAB SHOP, TO TEACH MORE ABOUT YOUR YOU TUBE EXPERIENCE!!!!!
What is EGT's? Pump shooters? A pyro? I sincerely wish to know what this means. Thanks
Slick!!! I’m in!
Thank you!!! 😎😎😎👊🏼
A like and a comment for the algorithm. 👍OK Speed and Custom.
Nice Rods!! Look so clean and tough.
Fun Times were had !
Absolutely!! 🇺🇸
Man cool the first time iv seen a lady that wasent standing there on there phone in the way.... great video 👍👍👍👍
She is awesome!!! Thank you!!
Love it! Reminds me of the American graffiti John Milner story!
That dude is cool. Love that he had a 32 Ford!
Awesome stuff 👍
Awesome video! Good stuff! Get it!
Thank you! I have never edified before. I will work on making them better!
-Charlie
great beginnings guys - keep it up!!
Good to see some Slick 50 dragster action 👍
ty for ride along that was amzing
You guys need to come up with some of your own designs shirts and merch! both you sporting the puddins fab merch! here for the support! wanna see the front engine drag go down the strip slick 50!
Thank you for the support! Puddin has set the bar! His shirts are top notch! I'm ready to see Slick 50 make a pass too! 🙏🏼
Heck yeah man! Great to see this!
Very KOOL Congrats on the first pass
you need one of them muffler hanger remover tools to get them old shocks off there. Not much money for the hassle it saves.
Great to see Slick and not sure who this Charlie is but hey, a guy with a clapped out f body cant be all bad.
Keep up the great work. Looking forward to metal working how to. I watch Make It Kustom with Karl Fisher and if yall teach half of what I have picked up from him It will be great. Definitely need some tig how to and go ahead and film that chop fix on that five window.
Thanx!
Good luck on the channel guys. My only suggestion would be to use wireless lav mics on both of you because when you're not right next to the camera or talking while not facing the camera, your voices don't get picked up very well.
Keep up the Awesome content fellas!!!!!!!!!!
Love seeing dragster videos👍🏻👍🏻
nice clean pass lets getttt it!!
Great video
So glad I got to hang out a little with yall at murphos at the round up. Cool guys.
Hey! It was nice to meet you!!
@@OKspeedandcustom your channel is going to be a blast
@@dieselmechanic9824 it's going to be fun! We were already doing this stuff much like yourself! We just decided to borrow a camera and film it. 😂
ThiS is epic!
Thank you!!
nice work! loved working on the 29 with yall
Hey those Uncle Dave Specials aren't bad!! Haha. Thank you!
SLIIIIIIIIIIIIICK!....50 LETS GO!
Let's gooooo!! 🫡
We'll throw the conventional shack. The only work one direction, if they're a gas shock, they worked both directions or I should say they've got pressure on ithey. Basically, you have to push like hell to get them to compress.😂😂😂
Cool video guys!
Thank you!!! Check out Midwest Hot Rods to see the second part. Video was uploaded today! Thanks for watching
😅😅sure didn’t take long to get her on the track , nice , more fuel is better at first , thanks BigAl California..
Thank you Big Al!
Glad your on utube👏🏼👏🏼👏🏼👏🏼
Slick the older tipe of shock hasn't have gas in them . To bled the air out of them keep them upright bo it on its side you pout air in valves hope it helps you
Ole slick !!!
Thank you for watching!! 😎👊🏼
@@OKspeedandcustom if it supports slick and helps him grow I'm all for it !!!
@@bluecollarrestoration your support helps greatly! Thanks again.
Glad to see you have a channel, quit watching Puddin
All right, slick Watched you and Putin now I get to watch your channel so I have something else to do
Charlie and Slick got some learning to do, I am here for it. Looks cool so far. I like the music and video editing in the videos I have seen. Let's Go! That Dragster is too freaking cool!
🙏🏼🙏🏼🙏🏼
Way cool
dope!
Thank you!! It was Rad to see in person!!! 🤘🏼
You can get a screen for older GoPros. You know you’re going to be on Marketplace anyway so, you might find a used one on there 🤷♂️
I didn't know that! That market place is hard to stay away from!!
Guys hope he knows about how to run methanol fuel . Drain fuel and keep check on oil for moisture and change frequently.
Going for lunch. Does that mean the Taco Boy.?
We went to Don Ciro's Tacos that day. 😎
Both places are great!
Cool video!
Thank you. Subscriber #2 🫡
Sweet Ride / Run
Thank you!! 😎
Awesome 😎
Thank you! 😎
Cool hot rod, an mates dragsters... You have a ball.. Doing this...
Oh slick! You started a you tube!!!
That's right! Thanks for stopping by!
my dawggggg.....what nice hair you have
I chopped it off 😂😂😂😩 👊🏼
Hell ya good video
Thank you! I appreciate that! 🤝
Put some lube on those surfaces. Don't dry fook the rubber parts. The end up squeeking and tearing.
Let’s go!!!!
Silent rips!!!! 💪🏼💪🏼💪🏼
Looked like 2 cylinders were not firing at the end of the video.
Outlawed for good reason ask Don Garlits
You're not wrong!!
she is big fan she lost it lol😂😂😂😂😂
👍👍👍
😎😎😎
One light... one run.. flying purple meth eater... 😆 Cool car.....be wild if y'all got to big daddy don an get him to sign it somewhere.....👍👍👍✌️✌️✌️
That man is a legend!! 🇺🇸
👍🏻👌🏻❤️🙏🏻
How much is that way to go
When are yall gonna have some OK Speed and Custom shirts for sale.
Soon! We are getting it all worked out. Thank you!
What transmission?
Roadster has a m20 Muncie and the dragster has a 2 speed power glide. The power glide grenaded on the 3rd pass, but Joey loaded another one in for more testing. 😎
I had to look up the difference between this and a slingshot. Kids these days, renaming everything . . .
It's hard to keep up with them!! 😂
Sounds like you're lean on fuel on first pass
A buddy of mine lost half his foot driving a front engine dragster.
Things can go south in a hurry!! Sorry to hear about your friend 🙏🏼
@@OKspeedandcustom he's doing alright. Had a pretty good career in racing.
@@OKspeedandcustom he's doing well. Had a great career in racing. I have a video of him firing up one of his old cars last fall.