Ford F-350 | Coil Spring Replacement

Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Replacing coil springs on Ford F350 super duty.
Please check out my other videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/...
Tools Used:
1/2" Air Impact Wrench: amzn.to/2M1bV2l
As an Amazon Associate I earn from qualifying purchases.

[@timrobison2463]

Great video. Good refresher before I go out and spend 9x this long replacing mine.

[@SemiWorkin]

Thanks for watching and good luck!!

[@johnhaerle3957]

That was freaking hilarious.

[@WhiteBoiJake]

Fax

[@jmccracken491]

Nice to see someone use proper lug nut tightening sequence I thought that was a lost art.
Very nice was to follow the video. Appreciate the effort recording and all that.

[@SemiWorkin]

Thanks for watching and commenting!!

[@m.7n6]

Im doing new front 2" plow truck coil springs on my 08 and probably gonna replace rear leaf springs at some point ordering my stuff off sd trucks

[@paulhead]

What was the reason for the spring change? I have a 24ft E350 motorhome and have been reading the stock springs are underrated from the factory and thinking to go to a higher rated coil.

[@cccEngineer]

Fantastic video! Can't wait to tackle it soon

[@SemiWorkin]

Thanks for watching and good luck.

[@bubbax7477]

whys is so hard for you guys to put the year of your trucks? Not all F-350s are like this depending on the year.

[@rusty299]

THAT'S WHAT I'M SAYING.

[@marcosmartinez5316]

Looks like the spring buckets also need replacement. Nice video!

[@SemiWorkin]

Thanks for watching!!

[@gtrdrejugfde288]

You made it look easy

[@samdon5110]

Awesome video
Could you tell me what kind of socket did You use for the bottom screw I need to order one for my f-250
Thanks I learned a lot I think you are the only video on CZcams who really shows how to do it righ

[@jesussanchez5342]

Is true 🙂👍

[@TheKymani411]

What size socket for the nut on the coil

[@investigation2039]

good job guy

[@SemiWorkin]

Thanks for watching!!

[@jesussanchez5342]

Muchas gracias por el video.

[@ChingonChingon-dn6pu]

También los cambiaste ?
Que camioneta tienes hermano?

[@elcangri797]

a un ford 350 del 79 se le puede montar un motor de ram 4000 con caja de 4 velocidades tambien de un ram 4000 , cual seria el resultado

[@125sm3]

Seems an easy job, no spring compressors required.

[@SemiWorkin]

Thanks for watching!! Very simple job.

[@user-gp2nu7te8l]

Спасибо Semi.

[@josesoto9099]

Do i need an alignment after changing springs

[@iannmiller]

If they’re a different length maybe

[@drlifestyle1817]

Anyone know the socket size for the spring

[@hustleeveryday5852]

1 and 1/8th or I believe a 30 or 31 socket.

[@user-dg5rp8dc8v]

What number is that socket? 24 or 25?

[@trizzfixbro514]

What size you use to get the coil bolt off

[@terrellscaife2411]

Wondering where those spring compressor tools work on those The ones that clamp on Both side they come in a set

[@jtg2737]

You are referring to spring compressors that are used on McPherson strut units. Without them(the pair) the spring would have so much pressure up against the tower nut that if you tried to take it off without them it would be almost impossible but most importantly EXTREMELY dangerous due to the amount energy on the compressed spring.

[@terrellscaife2411]

Those spring compressor tool I am referring to you can get them at Harbor freight for like 35 bucks and other tool co sell similar ones

[@SemiWorkin]

Thanks for watching!! This didn’t really need any special tools just let the pressure off with the floor jack.

[@bengkelriau7141]

👍👍👍

[@humbertomolina-is2ie]

44e
9

[@vikingrobot4179]

I love no BS videos without gay music, hairdos, fancy earrings on dudes and a bunch of freaking yammering and trying to act cool by drinking beer and saying “fuck” every other word.
Only thing I woulda done differently is put anti seize on every freaking nut and bolt
With all that rust gojng on under there.

[@user-sf6go8ik4u]

👍👍👍👍👍

[@SemiWorkin]

Thanks for watching!!