Biggest Kitchen first fix for me, plus data cabling, Exotic life of an electrician
Vložit
- čas přidán 19. 10. 2019
- lots of me pointing and talking as usual, massive job for me and Adam so had to crack on. hence why there is not much footage of use doing much work
www.expertelectrical.co.uk/ci...
www.downlights.co.uk/downligh...
Use BUNDY10 at check out
Win £500 shopping spree downlightdirect.wishpondpages...
Discount code for Napit registration use: NB1019 for october, message me if you need any more info.
My Instagram: / n_bundy_electrical
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.
If you would like to support me further I now have a Patreon page. If you would like to become patron please follow the link below. This will enable to me to create much more content for you, thank you!
/ nickbundyelectrical
Never more amazed to see the lengths people go to for their TV system even though there is bugger all worth watching on it. You would think with a bundle like that a rack server is going there !
Nick is a G. Love how he told the plaster that he is filming. 😂
Good to hear your using feet and inches with Adam. My son is my apprentice and i use mm, feet, inches and of course that measurement of "just a little bit". He seems to be getting it.
Yes please lads love to see the end finish and well done both of you.
Lost me at "Hi guys" on this one Nick!!🤣
Defo get the second video up. Sure it will look tremendous 👍
Doing a great job with young Adam, he looks to be growing in confidence with each video. Well deserved beer after this shift I hope🍻
Of course we want a second part !!! Great vid mate 👍👍
Would definitely enjoy second fix episode mate. Good vid as always. Great seeing Adam cracking on with you, should hope his tea making is on point by now too!
Would love to see it’s finished! 👍🏻 part 2 please
Great video! Deffo part 2. Adam looks like he's doing well and seems keen to crack on! Fairplay
yes Nick and Adam it will be good to see the second fix and kitchen finish
Please do a part 2, would love to see it finished... Keep up with good quality work & videos 👍🏼
Would absolutely love to see a second part to this, one of the best vids by far
Would be good to see it finished mate. Keep up the great work and vids. Take care of Adam, seems like a good lad.
Would love to see a part 2. Would also like to hear more about Adam. How did he come to be your apprentice? What are his aspirations for the future? Is he enjoying college life?
JP83 acc yh that sounds good
Nonce
Connor McAdam en.m.wikipedia.org/wiki/Cryptographic_nonce
Adam has the makings of a fine spark ..he just gets on with it while you can chat for ever..
The LED downlights with the replaceable "lamps" looks like a good idea.
As long as they continue to make them. Designs change so quickly these days - they may only be avaiable for the next couple of years.
Like us all 😂🥴
@@shilks8773 You could try to convince the customer to purchase a few spare lamps just in case it ever does fail and the parts are no longer available.
Keep up the good work mate, definitely a second part needed!
Be great to see 2nd fix on that mate
Would love to see a 2nd fix vid matey and to see the final product of all of Adams hard work
And yours of course
great job lads keep up the good work.. yes definitely do a second fix video
Great video as always, can't wait for part 2
Another great video nick would definitely love to see a part 2 👍
Excellent video, Nick. That's one hell of a kitchen. I think we could do with more from Adam to be honest. See how he's finding it etc. Keep up the great work. Love your videos, ermmm and yeah you do erm sound like Chris every erm now and again.
Yes please for part 2....👍🏻
The state of that plumbing
Need a part 2 Nick! Great video
3 core + E cable to the light switch is a super idea 👍
Would be great to get a part 2 👍
by thats a hefty job nick hope it went well for you its always better when plasterers have done
Thanks for this. Please do a part 2.
defo need to see a part 2
Looking forward to the second part mate
Adam was lifeguarding on the ladder!! 🤣
Deffo do a part 2!!
Part 2 would be great!
Looks like you certainly have a big job on there guys!
Was an interesting video, thanks. Would certainly be interested in a part two, seeing the lighting and speakers going up.
Definitely part 2 mate
Part 2. Progression would be awesome to see
Part 2 is a MUST plz👍
If your using a plasterboard back box on side of cupboards the cupboards will be 18mm thick, remember to make space either side for the clips that hold the box in, they don’t sit right on 18mm
John Dugdale MK 2062WHI is the right way to go 👍😉😁
Great video! Second fix please.
Eww the plumbing is such a mess
Excellent, part 2 please
Hey Nick... great vlog... looking good .. don't forget a Heat Detector in kitchen area👍
already one there bud
Great video mate. Did I call you while filming 🤦♂️🤣. Adam is progressing well. Clearly has a decent teacher 👍
Spot On Craig! Great Teacher to learn from👍
lol not this one bud, and yeah he a very quick learner
The hybrid 9s look great. Unfortunately some variations are out of stock. They're going to need a bigger stock room
Part 2 would be ace 👍
Nice video mate have a go with walldawgs made by dewalt can get them from screwfix can screw directly into block, life savers !
Definently want to see part two
Part 2 is a must
Second fix definitely
Pitty the ext light was cut off. Could have changed the switch wire to a perm feed N.
Awesome looking job though mate !
In the nicest way possible. I do like your videos and you do a great job. But with the amount of work going on in that space I'd had pulled the ring final back to a point and started again in that room. That way the 2 legs that come out the floor can be isolated and chopped off to save the hassle and you could had incorporated all sockets on the ring with no spurs and junction boxes.
I'm not there on site with all the facts from the job but from what I see that's what I'd had done. And that I'd had done the same with the lighting.
On these jobs we do normally turn up and the builder has pulled all ceilings down for M&E to be fair so it's much easier to do it.
I would also always get the builders to put a 50mm duct to the island to future proof it. Easily pull cables in and out.
Jcc fittings are great we use the v50s. Cant fault them and the price is fantastic.
Hadnt seen those hybrids I may take a look 👀
Stick some LED strips in the lanterns pal!
2nd part please mate 👍👍👍👍
Still not sold on the led down lights, cans and quality lamps for me.
YES DO IT
YESS second part :D
Yes to the 2nd fix video, will be good to see the end result. May also be interesting to some to see things like connecting up the induction hob and cooker hood. Mention was also made about the Wago connectors being rated at 32amp. What was the argument about and what do Wago say about the size?
The Insure are rated at 32A.
@@drummerbod OK, thanks for letting me know.
Whether used as MF or not, there's no need to use 32 amp rated connectors for a 32 amp 2.5mm2 RFC when either extending the leg through one box or adding a spur (the cables are only rated at 20 amps anyway), the 773-102's/104's, rated at 20 amps (de-rated down from 24 amps when MF) are perfectly acceptable (assuming no correction factors are applicable); although the 222's can be used if desired but are not actually needed because they too are de-rated to 20 amps when used MF, so negating the perceived benefit of using a 32 amp connector. All the info needed to understand what's required can be found here: www.connexbox.com/resource-centre - in short, the documents show 102's/104's (rated at 24 amps) can be used when accessible, and the MF document shows they can also be used when MF (but de-rated to 20 amps, as are the 222's, as seen in table 1).
Did you edit part 2 for this? Really interesting! Excellent work!
Yeah part 2 please
When I do velux windows I cut a blank plate in below and join the flex in there and then run to where it’s controlled from
Nick would you be able to make a 2nd fix of the kitchen been working on in the 1st fix please follow electrician
Can you review the work pack?
part 2!
Great video Nick, and excellent work as always 👍 out of interest, what laser level and tripod do you use ?
Yes I’d like to see a part 2 to this video too.
Keep up the great work
its a bosch clr15 i think bud and tripod was a b@q special
how did you price for all that investigating or is it part of your price per point for the new works
Run a cat5e cable for an Access Point? Wifi coverage in a place that big probably won't be great.
Part 2 please
yes 2nd video
Very nice mate. Get part two up 👍 check Adam out...you have your own camera man now 😁👌
Nick, what’s the company who built the conservatory ? Looks exactly the same as the company I used to work for evern down to the actuators on the lanterns
Do part two mate
Hi mate I'm going to Join napit and use your code.
How much discount do I get ?
Where's Wally come from😂😂😂
Is there a second fix video for this kitchen
I heard a few people having to change the jcc hybrid 9 fittings a few times because of failure have you encountered any of these issues with these?
Eamonn Blake
Yep - you will be changing them.
JCC replaced my failed ones FOC no reimbursement for labour.
I returned unused units.
I pulled out another 2 last week , LED’s ok it’s always the integral driver that’s shite and fails.
Hi nick! Where do you get the snickers work packs from?
my local wholesaler has them but not sure for you guys sorry
Superrrrrrr
hi nick need to see part 2 now?
Nice. Was that shielded Cat6 running with that power?
Looks like customer specd it? However, mains noise would have to be very bad to interfere with data integrity on unshielded. Shielded can create more issues if not terminated properly at both ends and the devices have to support shielding at both ends.
drummerbod looks like DC power cables.
a fused switched spur to control 2 sockets...why not keep part of the kitchen ring main? For the sake of sticking in an extra cable. Bit of a weird one thats all, not incorrect cause will pop the 13a fuse if overloads but just wanted to know why you done it. Cheers
Marc Robertson I agree a bit odd.
Nick can you get back to us on this why you done this then? Not insinuating anything I just wanted to know why you done it that's all mate.. think couple others would appreciate an answer back since you do say you reply to questions, especially with legitimate questions cheers mate
Hey mark sorry must have missed ur first one, if ur referring to the 2 sockets run into Conservatory high level I did put them on a ring after, both me and Adam forgot to connect them to anything on that day of filming ( they had a link between the 2 but nothing feeding them) I had to go back two days later to move the cooker and noticed I hadn’t fed the sockets so I split the ring above cooker isolation and fed a ring to them 👍
second part, please.
Push fit on the plumbing.
Can you explain the switch line again a bit clearer please Nick. You mentions using 3 core and earth but never went into detail 👍🏻
Where is the video of this finished pls??
Part 2 bro pls
Nick, can you explain the 3 core and earth switch line wiring again a little clearer please. Perhaps show it in another video if the opportunity arises. The noise of the plasterer drown you out.
Pipes look more than 150mm from the corners or cielings......
Could you not offer the customer a PIR? Switches in the cupboards is a bit meh
I think the switches go in the outside surface. !
Ring final.
How come you get a nice clean empty site to work on? When I go to 1st fix there’s hairy arsed builders with crap everywhere.
Probably his mates mum's house
how come you buy bosch stuff over milwaukee?
price really
Who else noticed the fox at 10:17
A job and a half that Nick, def a 2 man job. I felt tired watching ya :-D
Shattered at the end 😢
Why you are still doing sockets in ring? Start to preparing houses for smart controling houses, easier to manage, easier to fault finding if any happen and easy control from whole the world.
beg do a part 2
Glitchy video? Maybe watch out for memory card on the way out ...
Bloody hell mate you would have to be on mega money on them sort of jobs ( not for me ) you must be nackered
It’s a good earner this one 👍
Feed that kid will you???