Repair Your Mini Blind Pull Cord Without Removing the Mini Blind From the Window.

www.fixitforge... As an Amazon Associate I earn from qualifying purchases. If your mini blind is sagging on one side when you raise it all the way up the pull cord is probably wearing out. In this video, I will show you how to easily replace the cord without removing the mini blind from the window or wasting any of your expensive mini blind cord.
Visit our website, www.fixitforge..., for more DIY projects.
SONG: Acoustic Meditation 2, ARTIST: Audionautix, LICENSES: CZcams Audio Library.
Here are some affiliate links to the products mentioned in the video. Thanks for stopping by.
SGT Knots Mini Blind Cord - Durable Polyester
amzn.to/3jueZ4g
Stainless Steel Hemostat Straight, 6"
amzn.to/38KLb1z
Scotch Precision Scissor
amzn.to/3xszWoy
4 PC PICK AND HOOK SET
amzn.to/3KtQTCF
3 3/32-Inch Flat Head Screwdriver with Cabinet Tip
amzn.to/3KubRS9
2 Inch Mini Spring Clamp Set - 12 Pack
amzn.to/3O3meOT
Cigarette Lighter 10 Pack
amzn.to/3MeJNTl
E-22 Plastic Hammer
amzn.to/3E1WtcY
Folding Metal Step Stool
amzn.to/3jqNDw8

[@una8567]

Best, most efficient way to fix a lift cord. Everyone else should take down their videos. Thank you!

[@Fixitforgetit]

Hi, Una. Your comment was so kind. Thank you.

[@marcidehm8083]

Thank you so much! I just finished the project. Only issue I had was that the "splice" gave way inside the rail on the 2nd one. Fortunately, I popped just one half the blind and was able to see where to thread it. Thanks again!

[@Fixitforgetit]

My pleasure, Marci. I have had that happen too. I'm glad you got it sorted out. Thanks for stopping by.

[@ndaihan]

Awesome !!! It took me much longer time to get it done. Please have donation button, thank you !

[@Fixitforgetit]

Hi, Han. Thank you so much for your kind comment. No need for a donation. Just knowing that you were helped by the video is reward enough. Thanks for stopping by.

[@inesvanzandwijk9297]

Thank you very much for this usefull instruction. I have now the convedence to do it myself. Ines from Holland/Europe 👍

[@Fixitforgetit]

My pleasure, Ines. Good luck with your repair.

[@cmcbride2128]

Thank you! Very good idea. I started this, found the little plug was missing on one side, argh.

[@Fixitforgetit]

My pleasure, C McBride. Good luck with your repair.

[@chrisnewfie]

Good video. I accidentally cut of my two pull cords…. Can you do a video how to install the cords? Thanks

[@Fixitforgetit]

Hi, Christina. Just watch this video. Replacing the pull cords is what this video is about. Good luck with your repair.

[@rhodevans6523]

Useful - thanks! Would it have been better to do the bottom first and then sort out the length of the toggle end afterwards maybe?

[@Fixitforgetit]

Hi, Rhod. Sorry but I'm not sure what you mean. I appreciate your input though.

[@rhodevans6523]

@@Fixitforgetit Hi - it's only a detail but what I mean is that after you've run the cord through, instead of working on the toggle end, leave that end long, knot the other (bottom) end, close the plug and THEN cut the toggle end to length. Hope that makes sense.

[@Fixitforgetit]

@@rhodevans6523 Thanks for your suggestion.

[@user-jw3bj5gf2i]

John, on the mini blind restring is critical that I replace the cord with the same millimeter? My broken string is 1.2 and I can only find the right color in 1.0 millimeter. Will that work?
Thanks

[@Fixitforgetit]

Hi, Gerald. Unfortunately, I'm not sure what will work on your blind because my blinds are the only ones I have ever worked on. I used a 1.8mm Polyester cord which is slightly smaller than my original cord and it worked. It is important to use a polyester cord or it may wear out prematurely. This is the cord I used. amzn.to/3jueZ4g Good luck with your repair.

[@yellowNred]

Nice 🙏👍

[@Fixitforgetit]

Thanks, aeon. I appreciate you stopping by.