Tutorial / How to Make a Bubble Wall - Tutoriel / Comment faire un Mur de Bulles

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • Tutorial how to make a bubble wall
    Tutoriel comment faire un mur de bulles
    Open to see more below !
    Check my other videos : / @namsanled
    - Plexiglas alltop 2000x980x64x16mm
    - LED Strip RGB SMD multicolor with remote
    - Air pump 470 mbar
    - Alu frame white
    - Wooden box white
    - Music : Fev.r (Adam Fr.eland R.mix)

Komentáře • 236

  • @erwin280
    @erwin280 Před 3 lety +3

    I made this 5 years ago.
    It was almost done but i was struggeling with the pumps and bubbles. The aquarium pumps weren't strong enough to withstand the water pressure so i bought a piston pump for it. After that was okay i couln't get the bubbles the same amount in each shaft. After a couple of minutes the outer two were losing pressure so maybe just not enough power. I didn't use a tube with holes but covered the bodem of the plate and made a nipple in each shaft and connected it to a rail that is connected to the pump.
    After this i made an adjustible air valve after each nipple to regulate the amount of air to every shaft. After a couple of tweaks it worked well but the valves were bad quality because they were leaking water. Shortly after this i was forced to move to a other appartment and had no room for it and stored it away. But within 2 months i'm again moving to another (bigger) appartment and i already have plans to finish it.

  • @galaxytraveler5779
    @galaxytraveler5779 Před 9 lety +2

    Wow, what an in-depth tutorial! .......

  • @wickedgrafix
    @wickedgrafix Před 4 lety +3

    Did I really just watch a 2 1/2min video of photos! Great clear photos I guess!!

  • @BayareaJay
    @BayareaJay Před 10 lety +22

    OOOoooh......so that's how you make it! LOL!!!

    • @Henrix1998
      @Henrix1998 Před 6 lety +2

      1/ buy the parts
      2/ build the rest of the thing

    • @shadowr2d2
      @shadowr2d2 Před 5 lety

      Buy some stuff from Amazon. Than put it together. There you go.

  • @RoveAlongwithAtif
    @RoveAlongwithAtif Před 4 lety +1

    Amazing, i am struggeling to find PLEXIGLAS in saudi arabia

  • @beslanabadi6294
    @beslanabadi6294 Před rokem

    czcams.com/video/sCs_K_ehzhE/video.html - для детей в реабилитационном центре г Гусев
    czcams.com/video/23VjBnpVR-c/video.html 3-х колонная композиция
    czcams.com/video/jUIjtC816N8/video.html Выставка с пояснениями
    czcams.com/video/L0OGYLQImQg/video.html Выставка Мосбильд
    czcams.com/video/xM73ff5nMDU/video.html Колонна
    czcams.com/video/jvV10_NDnSE/video.html маленькая колонна
    czcams.com/video/dSZZshQtLnc/video.html Панель по радиусу
    czcams.com/video/xnTGRz_rZbo/video.html 2-х слойный акрилайт в колонне
    czcams.com/video/XCVqqOIZ6hI/video.html уголок релаксации и психологической разгрузки

  • @NamsanLED
    @NamsanLED  Před 11 lety +2

    This is a message for everyone who have sent me messages on this forum
    forumconstruire. com
    . Since the upload of my video, I have many private messages. I did not think that there will be this many people who are interested in making a bubble wall. A big thank you for all the support.
    I am sorry that I do not have the time to reply to each message, and i will find the time to reply when I can.

  • @cassiejo0012
    @cassiejo0012 Před 2 lety

    Absolutely incredible!!

  • @pameladreid3807
    @pameladreid3807 Před 2 lety

    Can you a video slower. I love the concept .

  • @pixildot
    @pixildot Před 6 lety +2

    such a amazing tutorial vdo, i learn a lot

  • @NamsanLED
    @NamsanLED  Před 11 lety +1

    Thanks, yes one hole per compartment but you can use two if you want.

    • @chasitysantiago9589
      @chasitysantiago9589 Před 3 lety

      Hi namsam..make one n tell me how much it be..i dont have the time btw wrk online school n my kids..hit me bac

  • @surhypolancogabin5560
    @surhypolancogabin5560 Před 6 lety

    Fabulous your idea. Congratulations and thanks for share with we.

    • @beckylu3863
      @beckylu3863 Před 6 lety

      Surhy led water bubble wall
      www.alibaba.com/product-detail/China-supplier-bubble-wall-led-used_60773484161.html?spm=a2747.manage.list.19.280e71d27B0W4Q

  • @AM-ny7wq
    @AM-ny7wq Před 10 lety +6

    This would looks so pretty in blue in a bathroom 💜

  • @lka6043
    @lka6043 Před 9 lety +1

    So Beautiful !

  • @laerciosantos3347
    @laerciosantos3347 Před 4 lety +1

    Good Morning ! Please tried to make a panel I spent a lot with silicone for acrylic and gave leak was applying silicone until stop the leak later when I put the water the weight of the water was loosening the acrylic plate of the divider columns Which glue to use ??? thanks for the support !

  • @forasec
    @forasec Před 4 lety

    GREAT MUSIC

  • @teddycordova4145
    @teddycordova4145 Před 3 lety

    Fantastic, men

  • @forasec
    @forasec Před 5 lety

    great music

  • @absaloncontreras3307
    @absaloncontreras3307 Před 4 lety

    Excelente la Rola: Sarah Vaughan Fever Adam Freeland Remix

  • @maho101n
    @maho101n Před 3 lety +1

    How to divide the crystal into squares

  • @jorgesarduysousa
    @jorgesarduysousa Před 9 lety +66

    Nice video, but I wish you could have done a tutorial, that explains the step by step process.

    • @herndonnailsalonspa2423
      @herndonnailsalonspa2423 Před 8 lety +1

      i am building a bubble water 12 feet by 10 feet, if you have an instruction steps by steps please help send me , i really appreciate it

    • @jorgesarduysousa
      @jorgesarduysousa Před 8 lety

      dont have any info, but send me your updates, I wish to build one a bit smailler

    • @teslabwall4638
      @teslabwall4638 Před 8 lety

      +Herndon Nail Salon & Spa that is large bubble wall. so you will need skilled workers

    • @sweetbrandigirl
      @sweetbrandigirl Před 7 lety +1

      I agree he went way to fast I couldn't even see what the steps were.

    • @Zootalaws
      @Zootalaws Před 7 lety +2

      At the end of the video he has a link to full construction details. Didn't any of you bother watching to the end?

  • @anthonycharles1930
    @anthonycharles1930 Před 10 lety

    Very nice!!!!

  • @deepakvyawahare6947
    @deepakvyawahare6947 Před 4 lety

    Song was nice👌🤪

  • @sheelamarkad8811
    @sheelamarkad8811 Před 4 lety +1

    Can u post the tutorial and details of materials

  • @koulalmohammed3719
    @koulalmohammed3719 Před 6 lety

    Sory , it's your video: 🚵💨💨💨🚵💨💨🚵💨💨💨💨💨💨💨💨
    For what ? For this 🏆 ?
    Congratulation 👑

  • @nectarinehair0115
    @nectarinehair0115 Před 2 lety

    Dang that’s some kick ass sexy music 🔥

  • @gerardbouffard6543
    @gerardbouffard6543 Před 5 lety

    Merci très beaucoup.

  • @mode54321
    @mode54321 Před 11 lety

    Nice job & Tutoriel .

  • @dxprimexr117
    @dxprimexr117 Před 10 lety

    It really worked! Thanks!

  • @pavelvoronovich1695
    @pavelvoronovich1695 Před 7 lety

    Класс, себе такую сделаю!

  • @sacdesac
    @sacdesac Před 5 lety

    thanks . great!

  • @Xquisitews
    @Xquisitews Před 10 lety +1

    Hi can someone please give me a step by step guide on how to make this panel thanx.

  • @TheSteveyd023
    @TheSteveyd023 Před 11 lety +8

    or just how much its cost?

  • @cubitusfr
    @cubitusfr Před 10 lety +2

    Bonjour pouvez vous nous faire une petite liste pour le materiel, car l'explication de la video en image va trop vite et quel pompe a aire devons prendre ?
    MErci

  • @MichelleKohlerArt
    @MichelleKohlerArt Před 8 lety +4

    Could you be more specific with your slides?

  • @JohnSmith-nr5us
    @JohnSmith-nr5us Před 11 lety +1

    Nice job! How many holes did you have in the tubing for each of the 15 compartments of the plexiglas? Was it just one tube hole per compartment?

  • @shaikismail4487
    @shaikismail4487 Před 4 lety

    Can u answer me how u did that means every time bubbles are changes how u did dat i want to know

  • @SDMTAPIZADOS
    @SDMTAPIZADOS Před 4 měsíci

    Donde puedo comorar el plexiglas?

  • @shortsnow91
    @shortsnow91 Před 5 lety

    nice

  • @foxylalapsp900
    @foxylalapsp900 Před 9 lety +69

    ????.......wheres the tutorial?......

  • @TheSteveyd023
    @TheSteveyd023 Před 11 lety +2

    are their LEDs under the glass too? or are they just on top and sides

  • @babysmile1376
    @babysmile1376 Před 7 lety +1

    An interesting solution. I'm afraid I will be hard to repeat. If there was a more detailed instruction how to make Bubble - I would then be able to do the same)

  • @m.imransheikh
    @m.imransheikh Před 4 lety

    Hi, can you please explain in detail about the material you use other then the glass?

    • @paulogama2879
      @paulogama2879 Před rokem

      Não é vidro não,esse material é acrílico

  • @sakeer710rehdil7
    @sakeer710rehdil7 Před 5 lety

    Nice

  • @mr4kgamer
    @mr4kgamer Před 8 lety +72

    This didn't show me shit

  • @manolotangarife3171
    @manolotangarife3171 Před 10 lety

    Como haces para limpiar el agua cuando empieze a ensuciar? Gracias.

  • @gregoriomulazzi2670
    @gregoriomulazzi2670 Před 9 lety

    Hello from Venezuela very good project but I need you to be more specific for building your project you would appreciate thanks

  • @marianomarsili6749
    @marianomarsili6749 Před 3 lety

    Alguien sabe como se llama ese plastico en argentina ?

  • @vocepodevocefaz1125
    @vocepodevocefaz1125 Před 8 měsíci

    Beli trabalho

  • @ericlawuan
    @ericlawuan Před 3 lety

    Does anyone know where to buy the multi-wall plexiglass

  • @Coopersuhail8
    @Coopersuhail8 Před 4 lety

    hi mate, this music is really good can u share the link of this song

  • @llgoswamiarjunll
    @llgoswamiarjunll Před 11 lety +1

    can you please post the link of the air pump you used or some similar pump available online

  • @coalachaos6486
    @coalachaos6486 Před 5 lety +3

    Hey man. Really nice! I have a question... How to you collect vaporized water at the top? And if it is a closed system, how do you relief the pressure? Cheers

  • @TheSteveyd023
    @TheSteveyd023 Před 11 lety +3

    could u send me a link of where u bought the plexiglass?

  • @bienloca1695
    @bienloca1695 Před 6 lety

    please please please remake this. I must see every step

  • @robertviniczai77
    @robertviniczai77 Před 3 lety

    What airpump?

  • @PersianFamVibes
    @PersianFamVibes Před 9 lety +5

    What kind of water do you use?
    And do you need to change water?

    • @AFXGaming
      @AFXGaming Před 9 lety

      I imagine just normal water not cooled though because you don't want condensation idk but you would change it if it got cloudy

    • @teslabwall4638
      @teslabwall4638 Před 9 lety +4

      destilated water

    • @drjay7879
      @drjay7879 Před 5 lety

      Distilled water will work best. Tap water will leave spots due to minerals. To keep the water clear; add a bit of hydrogen peroxide or bleach. It will kill bacteria (slime).

    • @drjay7879
      @drjay7879 Před 5 lety +1

      If someone is adventurous; use water with laundry detergent or mixed with antifreeze (outdoor use too!). Apply a blacklight and the "water" will "glow". Look it up.
      If you used clear refined coconut oil instead of water, the bubbles are much slower, due to viscosity.
      Bubbles are created from a simple aquarium air pump. Add a diverter valve before the air manifold and you can control the bubbles better, or shut them off, etc etc.

    • @zToggled
      @zToggled Před 2 lety

      distilled

  • @suomalainenolio
    @suomalainenolio Před 10 lety

    The alltop from plexiglas is about 85 euros, sheet size: 2000x980x64x16mm

    • @carlosmartinpavon8483
      @carlosmartinpavon8483 Před 10 lety

      where can i get one in spain? O.o

    • @suomalainenolio
      @suomalainenolio Před 10 lety +1

      Carlos Martín Pavón well www.techoscalabuig.com/ in Valencia could be place where you could ask it from.. or some other place in spain.

  • @joselintutiven8344
    @joselintutiven8344 Před 3 lety

    Que material es. Esa lámina

  • @lonestarposse21
    @lonestarposse21 Před 11 lety

    Would polycarbonate work instead of alltop? Alltop is so tough to get here.

  • @manolotangarife3171
    @manolotangarife3171 Před 10 lety

    Que es lo que tiene alrededor de la mangera como algo de color blanco

  • @kaverikitchen.motherstasty2543

    recipes
    Nice videoLike it n SBD :)

  • @fadyroshdy5913
    @fadyroshdy5913 Před 4 lety

    show us how you fix thee inner strips

  • @MRT-yt2ni
    @MRT-yt2ni Před 4 lety

    Acrylic ya polycarbonate

  • @Bibble1989
    @Bibble1989 Před 4 lety

    You should record the bubbles

  • @MrJareth
    @MrJareth Před 5 lety

    What makes me sad about this is that this beautiful bubble wall is in the basement by a laundry room covering up a clothes hanging unit, sigh, need I say anymore? This should be in a gallery.

  • @Relaxingthings654
    @Relaxingthings654 Před 4 lety

    please reply , where u buy this panel sheets?

  • @crystalabdancebutton6071

    It would look much better if it was in the wall and you could see through to the other side

    • @moonbunny1chuk964
      @moonbunny1chuk964 Před 6 lety

      Thomas Downey this is what I am looking for!? If you should find a tutorial for a see-through fountain, will you let me know, please!!!? Thank you!

    • @beckylu3863
      @beckylu3863 Před 6 lety

      Moonbunny1 Chuk there is the product link www.alibaba.com/product-detail/Modern-high-end-led-water-bubble_60154295792.html?spm=a2747.manage.list.85.785371d2JAx2ZF

  • @shaundalindsay8882
    @shaundalindsay8882 Před 4 lety

    Nice job on the video but some of us need verbal tutorials...Had to mute the music it was so bad (sorry Adam Freeland).

  • @vinit716
    @vinit716 Před 4 lety

    I want more details for this related video

  • @vinayakfountain5045
    @vinayakfountain5045 Před 7 lety

    good

  • @victorialocklear8465
    @victorialocklear8465 Před 4 lety

    Full tutorial please 🙏

  • @Happybubblewall
    @Happybubblewall Před 11 lety

    hi there, namsan, please first would you mind posting step by step of making bubble wall, with all materials used. but english .
    2. why do you use pvc tube , and later , i see only the hose at bottom of wall.

  • @MRT-yt2ni
    @MRT-yt2ni Před 4 lety

    Air pump watt

  • @olee007ao6
    @olee007ao6 Před 6 lety

    ห้องน้ำ ตู้เสื้อผ้า อ่าง บรรได เตียง โอ้อยากมีโรงงานเป็นของตัวเองแบบนี้

  • @anisettyvvs
    @anisettyvvs Před 5 lety

    Where we get and wt is the price

  • @OnlyExclusiveRenov
    @OnlyExclusiveRenov Před 10 lety

    good job :-)

  • @maajankicollection
    @maajankicollection Před 6 lety

    From where I can purchase give me link of you have

    • @beckylu3863
      @beckylu3863 Před 6 lety

      Tech Shivaya hello,here is the product link
      www.alibaba.com/product-detail/China-supplier-bubble-wall-led-used_60773484161.html?spm=a2747.manage.list.19.280e71d27B0W4Q

  • @robinhood6369
    @robinhood6369 Před 11 lety

    Air pump 470 mbar???? what kind of pump should i use? I am going to buy it from ebay. can you help?

  • @jvvega7582
    @jvvega7582 Před 4 lety

    Que tipo de bomba usa

  • @cathysnider8283
    @cathysnider8283 Před rokem

    What is the price

  • @treasureballard7640
    @treasureballard7640 Před 8 lety

    wow

  • @Crazyart1974
    @Crazyart1974 Před 4 lety +1

    I gave you thumbs down because u didn’t show how to make it ! But looks cool

  • @Trivium1980
    @Trivium1980 Před 9 lety

    Wahou !

  • @danielemerich8770
    @danielemerich8770 Před 4 lety +1

    Before uploading any video. Why don’t you look on the dictionary the meaning of the word tutorial.

  • @biswaranajan
    @biswaranajan Před 5 lety

    but how to clean it

  • @exectwaterfalls6992
    @exectwaterfalls6992 Před 5 lety

    Wts abt the clining prosses

  • @prakashpatel72
    @prakashpatel72 Před 9 lety

    Really, Nice video. I liked very much.

  • @suryajeet74
    @suryajeet74 Před 5 lety

    What happened? Good song, congrats!

  • @trannhat896
    @trannhat896 Před 11 lety +1

    I want is this
    i like

  • @stevecytfme
    @stevecytfme Před 3 lety

    Ok...nice to look at, but...where's the "tutorial". It's just a bunch of pictures. False advertising! Misleading!

  • @sabahmohammed2723
    @sabahmohammed2723 Před 6 lety +1

    hi,i am from India. how i get this type sheet india ,pls help anyone?

    • @beckylu3863
      @beckylu3863 Před 6 lety

      sabah mohammed there is the product link www.alibaba.com/product-detail/Modern-high-end-led-water-bubble_60154295792.html?spm=a2747.manage.list.85.785371d2JAx2ZF

  • @-b103
    @-b103 Před 7 lety

    Now we just have to mount it on the floor xD

  • @nickolailaw9058
    @nickolailaw9058 Před 6 lety

    This is tutorial or slideshow?

  • @NamsanLED
    @NamsanLED  Před 11 lety

    Aqua Medic - air pump Mistral 300

  • @christophelegendre4407

    je fais le tour il y a pas moyen de trouver la plaque en plexiglas 😡😡😡

  • @tuantuananh1644
    @tuantuananh1644 Před 5 lety

    I want to buy a set of oxygen bubbles that I can buy

  • @carolinaescobar9561
    @carolinaescobar9561 Před 6 lety

    podrian hacer un video especificando de forma detallada please

  • @johnnycarter6196
    @johnnycarter6196 Před 4 lety

    One piece of plexiglass alltop delivered to UK is costing me £328, not at all cost effective. Bought an already made one from shop for £400.

  • @BiagioFerreriEventi
    @BiagioFerreriEventi Před 9 lety

    Dove posso trovare alltop in italia ?
    e le schede tecniche del montaggio,
    se qualcuno lo avrebbe già realizzato vi ringrazzierei se mi date delle spiegazzioni passo per passo.