Poco M3 Disassembly Teardown Repair Video Review
Vložit
- čas přidán 11. 09. 2024
- Poco M3 Disassembly Teardown Repair Video Review
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
Still the BEST video I've seen on the disassembly and reassembly and the narration for the procedure. Downright professional it is....and we don't have to listen to some crappy music to hear you do it !! THANK YOU SIR 111
Thanks for the super video. Thanks to you I managed to locate and fix the proximity sensor. Poco M3 is my favorite phone right now. Zero problem, very satisfied. Even the proximity sensor problem happens only after I replaced the broken screen, so I guess I made something wrong, but at the end I fixed it quickly. Thanks
You're welcome, glad it helped.
thanks for the good video .... keep up the good work .... if u may , please say a bit of more information about the items while removing them ... for example this is the snapdragon xxx chip, this is the XX Gb and model of the rams, this is the XXXX mAh battery , these are X cameras and each camera XX MP and bit of the camera specs (XXX for the numbers "model, size , Etc." )
Ok will try to mention more info in future, and thank you.
I'm from Pakistan when i first saw your channel and also made a subscriber
Hi and thanks!
Hey, thanks for the video! Is there any immediate warranty stickers that you void when you open up the phone? I need to replace the volume button and don't feel like waiting months by giving it to warranty
Yes, there are two screws with xiaomi logo stuck on, impossible to unscrew without drilling the paper logo.
The dead boot in POCO M3 is an insane issue. Please give a tip on how to turn back turning on.
It's many times now happen on my phone.
I am pretty attracted by the Poco M3 so thank you for your good video , not fast and explained . Could you make a teardown of the Ulefone Armor X8 please.
what do you think about the new fingerprint sensor?
is it better than previous?
what is the model?
I did not use the previous model so I am not sure if it is better. Not sure of the model of the fingerprint sensor.
Finally POCO create a bigger size LTE antenna. Ensure help getting more signal and Mobile data smoothly 👍
It kinda looks like the cyberpunk edition of OnePlus 8t
Ya, looks similar to it.
It was good, thank you, I bought a phone this way today
Thanks and you're welcome :)
Thanks for the video, you are awesome !
You're welcome, thanks
Cool, very informative 👌
👌
Are you interested to make OnePlus N10 and N100 disassembly?
So far I don't see anybody doing it and I will buy N10 once it's available in US
Hi, yes will try n do it within the next week. Thank you.
Hi, Could you confirm if an adhesive is used in the assembly regarding removing the back housing? Tks
Hi, there is a thin strip of adhesive around the camera lens cover, but the back housing is just clipped in, so you don't need to re apply any adhesive or there is no adhesive really holding it down aside from the clips.
Will disconnecting the battery and screen cable cause data lost?
Nope
Thanks mate very appreciate 🙏
No problem 👍
Like numper 11 👍
my poco m3 its not receiving/making any calls , maybe I need to replace the
gsm antenna!?!?
Make sure your back cover is properly seated in place and has not lifted up in any corners since the antenna contacts on the back housing need to touch the contacts on the main board. So if the back cover has separated or come loose, then they will not make a connection.
Meer bahi camera thora wide angle use kry or disassemble jb kry to sary part pas pry nzr ay video mai achi look ay gi jasy Jerry everything ki videos hoti h wasy
Not sure what you are saying
I love Poco M3 ☝️🤩🤗💪👍
👍👍
Are you satisfied with it?
What tool do I use to heat the adhesive on the screen?
You can use a hair dryer or heat gun but hair dryer is better since you wont accidentally over heat it.
Why your removing the battery last?
Not sure, it's just the order I am used to doing it in for teardowns.
Horayyy❤❤❤❤❤❤❤
:)
Is there any p2i coating or any other protection for for water resistent?
This one seems to be easy to repair
Yea pretty easy
hey! I am from the Philipinnes. Does this process fix the device with having the issue of cannot turning back on after being drained lowbat?
i'd be thankful for your response.
Hi, not sure. It's not normal for the phone to not power on after a drained battery. I know back in the day with the iPhone 5C there was a similar issue sometimes with the phone not charging anymore if the battery was allowed to completely drain on some units, but sometimes that was a battery problem and required the battery to be replaced and sometimes it was a problem with the main board chip that handled the charging.
@@PBKreviews Thank s a lot sir, I'll try to get replace its battery
Oneplus n100 vs poco m3 what do you think !
Its a tough call, the M3 has a higher MP camera but I would feel the oneplus might be a better built phone. But the M3 is an easier phone for repairs also.
Very good video. Is there anyone else with a POCO M3 phone that won't turn on nor charge? I tried the tricks with the volume and on/off buttons and I tried opening and disconnecting/reconnecting the battery, but it didn't work
I read somewhere that it's due to a problem with a micro-capacitor that won't discharge,
the trick is to disconnect the battery (nape)
and wait 48 hours, then reconnect the battery (nape)
and finally your type c charger, and you're done!
Now Flash Cyberpunk Ported Custom Rom to match it to Oneplus 8T
Haha yup
Hi
Cool, 6000mAh battery.
👍
Is poco m3 is worthy?
F* yes
My Poco has died during the night meanwhile was charging, what is the problem?
Could be a bad charger port or battery.
@@PBKreviews can i buy another battery and replace the old?
Bom
👍👍👍
👍
Hey!! How about OnePlus Nord Disassembly 🔥
Hi, that one has been done by many people already, so would not be worth to spend the money on doing that phone when not too many people would watch it.
@@PBKreviews I agree. thanks tho, love your videos!
@@prakharagnihotri5579 Thank you, Glad you enjoy them! :)
I think you made a mistake, the phone's midframe is most likely magnesium
I think its an aluminum alloy but I could be wrong.
@@PBKreviews I too think it's a magnesium alloy.
Obviously not pure magnesium because that's just insanely brittle and is a fire hazard. So it's commonly alloyed with several % aluminium.
Pure aluminium is just insanely soft and easy to bend, and much easier to scratch. It wouldn't be all that much more useful than a plastic subframe if you could just permabend it with your fingers. Again due to this fact actually harder alloys with several % magnesium are very common, and more additives may be needed to make the material castable.
I think magnesium alloys are preferred for phones because they cast thin long walls easier, and provide more rigidity to absorb deformation and prevent damage to the LCD panel and glass layers. There isn't much between alu and magnesium on cost, with magnesium being potentially cheaper to manufacture.
More or less reliable ways to tell alu and magnesium apart is you can apply vinegar to the surface, nothing should happen on the aluminium, but some bubbling will occur on magnesium. Also if you scrape off some material into a powder and apply a flame to that powder, if it's high in magnesium, you should see white sparks and you might even make a self-sustaining fire, which if you do make a fire, resist the temptation to quell it with water, as that can just make it stronger, just let it burn out. Aluminium doesn't burn like that.
I'm not a metallurgist or anyhow an expert in a related field so i'm mostly speaking out of my behind, it's not something to rely upon, it's just things i read or heard somewhere along the way.
I thought I heard Pokémon
Lol
Redmi 9 power vs poco M3
They are pretty identical spec wise, but the redmi 9 power has an additional camera lens, so I would lean toward the redmi 9 power. It is also rated splash proof.
Can i get a heart 🥺?
Looks soo easy, until you try it yourself.
Bang ada jual tutup mainboard poco m3 ga?
Not sure, your best bet would be to look on places like ebay for someone who may have parted out a phone.
@@PBKreviews okee thanks bro
My poco m3 has dead
What happened with it?