Home depot husky 52 flat black tool box Model H52CH6TR9 overview.
Vložit
- čas přidán 12. 09. 2024
- Home depot husky Model H52CH6TR9 textured black flat black tool cabinet box review overview.
My youtube channel / e36m3jeffkennedy
Please comment, like, subscribe and click on the bell if you want to be notified when I post a new video.
Thank you guys for watching, if you would like to support my channel a little by buying a product that I use from amazon please use these links, Amazon pays a small commission for me sending you to there site. Thank you and here are some of the products I use and support. I will be updating this list as time goes.
PNY Elite Performance 64GB amzn.to/2nIKEQt
Metal Phone Tripod Mount amzn.to/2oetrSQ
oso sweet kershaw amzn.to/2oOvlaG
scarlet focusrite solo amzn.to/2nhVodf
gummy bears amzn.to/2nIRV2t
boker subcom amzn.to/2nhXHwP
AUKEY Ora iPhone Lens amzn.to/2oeDrvo
Streamlight 88049 ProTac 1AAA amzn.to/2oexuyC
Streamlight 88061 ProTac 1L-1AA Dual Fuel amzn.to/2p6HLdb
Maxpedition E.D.C. Pocket Organizer amzn.to/2oeyaUi
Lavalier Lapel Microphone amzn.to/2oetXjK
Microphone Suspension Boom Scissor Arm amzn.to/2oeEbka
Anker Bolder LC40 LED Flashlight amzn.to/2nPP7kY
Really like your under the hood light
Great light hack.
Great idea 💡 with that HarborFreight magnet bro 🧲 👍🏼
damn good idea for the light!
Had the same box, and the large socket drawer would hang up when opening it on the left side only. Eventually upgraded to a 72 inch US General.
helo very good video!!
and do you have a tutorial video how to installe the 3 center Ball bearing slide in the midel of the big drawer ?
What is that screwdriver set?
The ones you said we should know about.
Great video, and love the light too. How has the box held up after 5 years?
Good video man
Great setup. What are the side holders for the aerosol cans? I see it is on both sides. I love the light hack.
Harbor freight can holders, painted with flat black. Cover the magnets with tape when you paint it, it will come off and stick to the box if you don't.
Dig the light idea...good work!
That light mod though...................genius! That makes the entire box much more than just a tool box.
Great idea with the Light man, nice setup!
I just bought one and I love it. filled it already.
I took your idea with the light. I screwed one of those cheap HF bar magnets into the back of the light housing and just stuck straight to the hood of the box. Works amazing. Thanks!!!
I have the 56" husky box and I did the exact same thing with the light and even used the harbor freight magnet. I was surprised to see someone else did that as well. Great minds think alike.
the light mod is incredible.
Mike's Tool Shed I'm glad you like it, is been working great, I shot a little more detailed video on it if you want to watch it, czcams.com/video/fljoorTO_RY/video.html thanks.
Great video man! I bought the exact same one. I love how when you push the drawers they shut themselves. You have me some great ideas with the light!
Thank you, I am really happy with everything.
e36m3 Jeff Kennedy
I run my sockets in the top and battery and air tools in the big drawer in the bottom cabinet
Just got this box.. love it thx for the video. Gave me some very useful information
nice review, almost bought the standard 52in box from the Depot today, glad I saw your video! I like the soft close draws, and this one has the plugs. the other 52in doesn't have those 2 options. And I like the all black. perfect for my garage for working on my own car/truck and snowmobiles. Thanks
also like the better wheels and locks on this 52. The standard 599$ 52in I was looking at today had no wheel locks and no power strips and no soft close draws. so for 100$ more I think this one is worth it. also the 56in box manufacturer looks similar to the cheaper52in I was looking at. ?
The standard isn't bad but for the $100 its well worth it to get the flat black, in my opinion.
I just got one. I wish I got one sooner. Filled it up quick.
Brilliant review, I love the overhead light !
Love the LED light hack
Where did u get those plastic trays for loose stuff?
Harbor freight, they needed to be trimmed but they can be made to work
Neat tool box video Ken. I need to do a tour video of my Milwaukee 46 in. tool chest and rolling cabinet set.
The tool box tours get lots of views, This was one of my first videos, I need to do a update at some point. Thanks
Just got me a husky tool box and i think its a great box not as full like this one but its getting there 👍
Nice Box , great setup .
Thank you
Great video, man. I just bought a similar box from HD. That light hack was worth the view alone. I wanted an LED, but I didn't want to deal with a battery. Also, yeah, separating out the 1/2 sockets from the others is probably what I will do too. Doesn't make sense to cram it all in one drawer.
hey nice tool box. i also wish the drawers were a little deeper. i had these rails for my sockets that i thought would fit perfect but after i got it i had to change how i wanted to set it up bc the drawers werent as deep as i thought. but you can check out my tool box tour on my channel. nice set up by the way.
I was just at home depot and they have a new bow that is 24" deep and made in Canada, the price was double this box though and the display is blue, the flat black sold me on this one. I'll try to go back and shoot a little video on it, I forgot to because I'm just not used to whipping out my camera everywhere I go.
Nice tool box bro. I really life the LED shop light mod. Might copy that idea. Subscribed to your channel, put out some more videos.
RealTechReview thank you sir, I am trying to put out 1 or more videos a day on something I think is interesting or useful. I also enjoy your videos, how is Hyundai treating you?
e36m3 Jeff Kennedy I am enjoying Hyundai far more than Kia. it's going GREAT. I had considered going back to Chrysler, but chose not to. It's good to initially just make videos. Helps build your channel, figure out what exactly you want to do with it. Then after a while comes editing... but I wouldn't worry about that until you have 50+ videos up. Just my 2 cents. I don't even edit like I should. lol. I look forward to watching your future videos.
RealTechReview thanks for the advice, I'm sure what I post will change with the seasons also.
A good video. That is a nice tool box. cheers .
I see in the May flyer that HFT is now selling the Husky 46 inch bench with wood topoer, branded the a Yukon.
I would rather they made a US General 46 inch version.
I haven't seen that yet, I will keep my eye out for it, thanks for the heads up
They have 2 versions of this box, the standard at 20 gauge steel and the 18 at 20 gauge steel for 798 vs 698 for the standard. Is it worth it for the heavier gauge? I think the drawers are an inch deeper as well.
cool
Thanks for watching
How did you make the hammer holder?
Thank you for the review.
Shawn NONAME it's made from wooden dowel rods from an old oak bathroom towel rack and a couple pieces of 1x6 for sides, attached with small angle iron.
e36m3 Jeff Kennedy ok thanks . I see now. Thats great idea.
Hey Jeff, thx for the video. I was wondering where you got all of the black trays is see throughout your box? I could really use something like that to help organize. Thanks!
Jake Davis harbor freight, just cut the edges off to fit
I suspected as much, thanks for confirming. Nice job!
Did you make a vid on your hammer holder? If not can you show it a little more in depth
Sorry I never did but it's made from 2 dowel rods (oak) and 2 pieces of 1 x 6 and attached with angle iron into the handle mounting holes on the box.
Nice box I have the model just prior to the one you have it is full now very nice setup thanks for sharing your opinion and tools. I have a tour of my boxes on my channel if you want to check it out.
John Gibson I will check it out 👍
Awesome, I have a little light but haven't found any good magnets, thanks for the idea. I will definitely do this.
Do you know kr have you thought about trading the 2 little drawers for a a bigger one? Dont know if husky will sell you one drawer that will fit inspite of the two smaller one.
I don't see them selling the 52 inch matte black one anymore but they do have the top drawer tool chest and bottom tool cabinet. I can pretty much buy those two and it'll be the same?
Where did you get the side holder for the hammers? Been looking for one
What are the black plastic dividers you have in a lot of the drawers? That you stick the miscellaneous wrenches etc in? Have a link?
6 Compartment Drawer www.harborfreight.com/6-compartment-drawer-organizer-99729.html
I cut the ends off and butt them together
Damn, I'm doing that with my hammers free up a drawer
In your top left "screwdriver" door you had some small drivers in a shallow black holding tray. Any chance you remember where you got those? I cant seem to find any small trays. Great vids btw
2lazy4agoodname that tray is from harbor freight, I cut down the longer ones and get like 5 pockets I think. Just use a good sharp utility knife and be careful.
e36m3 Jeff Kennedy Thanks so much!
2lazy4agoodname no problem, thanks for watching👍
What brand of tools do you use for rc cars and helicopters..you didn’t go into detail
Mip for allen screws, wiha for Phillips and flat head, and I will modify handles to use those brands tips. For 10th scale I like the old associated aluminum handles, my mini z cars I'm using atomic handles.
9,000 views already damn... what does e36m3 stand for?
Bill Long e36 is the body code for my bmw, like sn95 is a mustang body code, and yeah this video is doing pretty good. thanks man
Those "hobby screwdrivers" a link or place where you bought them at?! - thank you!
Jordan Narlock I will try to post a link in the description when I get near a computer but you can Google "team associated factory team tools" should be around $40 for a 5 piece set give or take. I have a couple sets plus the Phillips and flat head. the other tools I have there are ofna, team integy, and mip. eBay might be a good place to look also.
I found the top box available for like 200! you think it's worth it?
I like the box but with just the top I would think you'd hit your head on the lid, it's kinda designed to be used all together.
You said you got that large light at Harbor Freight? Battery powered?
Robb A if your talking about the big one stuck to the top of the lid, the light came from sams club, its a Honeywell led shop light, it is being held up with the free with coupon magnet strip from harbor freight.
e36m3 Jeff Kennedy awesome! Thank you sir.
I seen one at Home Depot that was wobbly and I want know is your wobbly? Or do the wheels hold it good?
Gerardo Perales the wheels fell off mine when I rolled it out of the store, but thats because they don't assembly them correctly. I torqued the bolts down pretty good after than and no it doesn't wobble now. I honestly really like the box for what it cost.
Hows it still holding up for you? I've only had mine a few months but a lot of my drawers no longer auto close and when I took the drawers out to figure out why I found that the little clasp the drawers close on to engage the soft close have broken on about 50% of my drawers..
I have not had any issues, all drawers still self close, it does stay in the same spot and I am the only one using it though, I would contact the mfg if I was you, they were very helpful getting the correct keys when i bought the floor model.
@@e36m3JeffKennedy Awesome thanks I plan to contact them and I'm thinking its because I've been working in some extreme cold lately. Garage was -15 the last month.
@@JeepingNet yeah that could be playing a part, grease turns into epoxy at those temps, but you already know that
where did you get the big m3 sign from
Off of ebay a couple years back, a guy in Florida was making them. It's fiberglass, not perfect but looks cool. Closest I've found is a guy cutting aluminum signs on ebay now. Type this number into the ebay search bar (251777435987).
Thanks!
extra handle for $34.62 at home despot
Awesome, thanks for the info
i been waiting for 3 weeks now and its still not online i musted whent to all the home depos here in houston and none of them have it
pipiripau 78 are you talking about the 52 in box combo? all the stores up here have them, I just looked yesterday. Good luck.
e36m3 Jeff Kennedy i just whant the bottom and i whent to home depo and they told me its an online thing only and i ask then if they can call anothere homedepo to see if they have it and none in the houston area are available.
pipiripau 78 yeah this particular box I have never seen available separately, the top box drawers are deeper if that means anything. Good luck, I hope you find one.
Yes thank you and very nice video man take care..
Love your video but slow that camera down its moving to much and not focusing long enough on the things your pointing out
Boo Wescott I'm sorry this was one of my first videos, is there anything in particular you were wondering about? It's difficult because the phone is such high resolution and it gets reduced and yes I need to slow down.
What brand are you hobby rc car tools?!
Anything Adrenaline team associated, ofna, team losi, integy
e36m3 Jeff Kennedy nice you've got them all. That light idea I'm going to try. Thanks again
Thats a Tony the Technician edition tool box! =) OH what pliers are those next to the screwdriver trays? Stop by my channel if you like pliers =)
I had my box and video before Tony, those are snap on 5acp they don't make that exact number any more but they have come out with a replacement. 👍
Anyone know if this ships to uk?
Cost ??
Man... I can't afford to lose 2 inches! This is a real problem!
That is what she said!!
what you pay bro
GAS,BASS,ASS,AND BRASS666 666 $699 full price, I have not seen it go on sale. If you are a vet they will give 10% discount.
Cool tool box, check out the video I posted on my channel, I'm going to be an Automotive tech I need feedback on what tools I'm missing. Thanks