Looks like another great new and exciting product to be introduced by Koch Chemie here in the US of A! That browning action was insane! Koch Chemie looks like they have done it again! No doubt this will become a new favorite for many a detailer here in the US.
KCX keeps adding on, I’ve used their products since I’ve started my business, I had to go elsewhere for strong tire cleaners but not anymore now I’m just waiting for them to get a strong water spot remover and bring on some more ceramics
As an old person at 52 you see circular product cycles. There was a time when we got away from tire cleaners that did this because: “Tire sidewalls turn brown mainly because of an element added to the rubber called antiozonant. It saves tires from premature drying and cracking due to the process of oxidation. Tire browning is usually called blooming. It's a continuing process that can be prevented by thoroughly cleaning and protecting the tires.” The problem is when you use too aggressive a cleaner and you are then pulling the tire protection. That browning to me does not look like dirt or grime. Yes, is great to use a tire cleaner to remove dirt, grime, and old tire coatings. In this video it shows me an example of too aggressive a tire cleaner. I would only use this for my wheels. I’m not a Koch Chemie hater I use PSS for my tires and GUM for my floor mats. They are excellent products. The worst offender of a too aggressive tire cleaner is Adams. I’m old and may be completely wrong as tire technology has advanced. I’m only going by the appearance of what is being “pulled” from the tire and that it does not look like dirt. I’m open to any other explanations of the browning occurring.
Correct. However, to reset the tire to stop that from happening so fast you need a good tire cleaner to knock it down. A good dressing was applied after to keep that browning away.
I was using a strong degreaser for tires until I noticed it drying them out so I’ll use every once in awhile to get a deep clean then maintain them with green star, water based dressings help too. I like longer lasting but I think the solvent is bad for the tires
Superior products has a cleaner that’s super similar to how this works and its 27$ a gallon “non acid universal cleaner”. I dilute 1:5 an get exact results
I do the same vehicles about every ten days. None of them are rough. So a heavy cleaner does more stripping of the dressing than I like. Usually after three rounds of Perl 50/50, a fourth isn't needed. How is this product with stripping dressings at your ratio? Sometimes you want to strip them, sometimes you don't. Hard to give up BrakeBuster, but I'm not married to any product.
I believe KC products are made outside the US? I've heard nothing but good things about their products, however I prefer chemicals made in the USA. Thanks for your review.
It’s diluted 5:1 27 oz water 5 oz of Awh More than enough for all 4 wheels. I get atleast 2 vehicles out of one fill. I use a lot of foam per wheel as well though.
Koch Chemie does a good job with their cleaning products for sure. MWC is hands down the best wheel cleaner I've tried.
MWC is wonderful
Looks like another great new and exciting product to be introduced by Koch Chemie here in the US of A! That browning action was insane! Koch Chemie looks like they have done it again! No doubt this will become a new favorite for many a detailer here in the US.
Very impressive at 5:1 dilution. Thanks for the demo, Justin.
KCX keeps adding on, I’ve used their products since I’ve started my business, I had to go elsewhere for strong tire cleaners but not anymore now I’m just waiting for them to get a strong water spot remover and bring on some more ceramics
You should be able to use their acid wheel cleaner for water spots.
As an old person at 52 you see circular product cycles. There was a time when we got away from tire cleaners that did this because:
“Tire sidewalls turn brown mainly because of an element added to the rubber called antiozonant. It saves tires from premature drying and cracking due to the process of oxidation. Tire browning is usually called blooming. It's a continuing process that can be prevented by thoroughly cleaning and protecting the tires.”
The problem is when you use too aggressive a cleaner and you are then pulling the tire protection. That browning to me does not look like dirt or grime. Yes, is great to use a tire cleaner to remove dirt, grime, and old tire coatings. In this video it shows me an example of too aggressive a tire cleaner. I would only use this for my wheels.
I’m not a Koch Chemie hater I use PSS for my tires and GUM for my floor mats. They are excellent products. The worst offender of a too aggressive tire cleaner is Adams.
I’m old and may be completely wrong as tire technology has advanced. I’m only going by the appearance of what is being “pulled” from the tire and that it does not look like dirt.
I’m open to any other explanations of the browning occurring.
I think you’re right, I’d like to hear what a tyre manufacturer would say about this.
Correct. However, to reset the tire to stop that from happening so fast you need a good tire cleaner to knock it down. A good dressing was applied after to keep that browning away.
@@LSD04 I have some friends at Nitto. Let me check and I’ll get back to you guys. I’m curious to more in depth info as well.
that would be awesome@@MtnTownDetail
I was using a strong degreaser for tires until I noticed it drying them out so I’ll use every once in awhile to get a deep clean then maintain them with green star, water based dressings help too. I like longer lasting but I think the solvent is bad for the tires
You do a great job! I’d love to bring you my car for a full detail after spring sports end!
Looks like an awesome product! Can't wait to check it out, good review dude!
Thank brother
I like it on a dry tire
Impressive even before the agitation.
It really shows on the 2nd foam down how effective just the initial foam down was
Superior products has a cleaner that’s super similar to how this works and its 27$ a gallon “non acid universal cleaner”. I dilute 1:5 an get exact results
That looks good definitely wanna try this stuff 👍🏼👊🏼
The price is wonderful. You get 7 bottles out of one 1L bottle. Which makes the price like $4 for a 32oz bottle
Impressive 👍
Is best to use the cleaner on a dry tire and wheel or wet tire and wheel
Here for some hot wheel cleaning action
Right on!
Good review. Thanks!
Thanks for watching!
Nice video dude
Appreciate it!
I do the same vehicles about every ten days. None of them are rough. So a heavy cleaner does more stripping of the dressing than I like. Usually after three rounds of Perl 50/50, a fourth isn't needed. How is this product with stripping dressings at your ratio? Sometimes you want to strip them, sometimes you don't. Hard to give up BrakeBuster, but I'm not married to any product.
Running this product at 10:1 you wouldn’t strip the dressing. However, at 5:1 you would strip it.
Looks like a good product!
It’s wonderful!
I believe KC products are made outside the US? I've heard nothing but good things about their products, however I prefer chemicals made in the USA. Thanks for your review.
Correct. KC is made in Germany. Formulated, tested and produced in house at their manufacturing facility.
They really are the best. . In MY opinion
Awesome stuff from Koch Chemie
It sure is!
whats the dillution ratio that was used on the video sir?
@@archietambasen4150 5:1
Is safe for ceramic coating wheels
This is an extremely strong wheel cleaner. I probably wouldn’t use it on a coated wheel. My opinions
so your foam sprayer there, how much product in ml or oz are you using to water? And is that enough for all 4 wheels?
It’s diluted 5:1
27 oz water
5 oz of Awh
More than enough for all 4 wheels. I get atleast 2 vehicles out of one fill. I use a lot of foam per wheel as well though.
Looks Awsome! Is this safe on plastic trim?
Like safe as in if you get it on the trim around the wheel well? Sure thing
Yes, that’s what I meant. Thankyou!💯💪🏼
Did this product replace the AWC, green Alcaline Wheel Cleaner?
I’m not sure. I have only ever known this as Awh. I have never known a Awc.
@@MtnTownDetail Oh, okay . I found out Awc is the same as Pbn, when sold to consumer in 5 litres, they changed the name to Awc :)
Infinity Wax..... incinerate wheel cleaner bad ass fir wheels are tires 😳
does it smell good? i use brake buster and it stinks
It’s not as bad in my opinion but still smells that way
@@MtnTownDetail thanks man..guess car shampoo smell good but not wheel cleaners
@@phat_gunpla_etcyou need to try optimums new wheel cleaner if you want powerful yet low odor an grape scent! It’s amazing, only 35$ a gallon.