I don't know how it happened!! But I just removed the lid and moved the plugs a little and it's good! Like magic and tomorrow I have an appointment with emissions 😅 so! Thanks a lot ❤
Thanks for this video! I just did my rear brakes on the 2004 F-150 due to a chewed up rotor, and the light didn't go out. I will check the dash cluster like you showed us and check if it is the issue. I always thought it was a bad switch for the E-brake, because the light stayed on intermittently, but this looks more promising. Thanks again.
There are two things you absolutely do. First, suck the solder off the connector's pins on the circuit board and add fresh solder with a good quality flux. Second, solder both ends of the bigger black resistors. They have numbers written on top, usually 151 or 820. Those that are mainly on the upper left quadrant are suspect but look for all the big ones and solder both tab ends. Don't worry about other parts. Those ends frequently have cracks in the solder. You must have a temperature controlled soldering pencil and quality flux. Anything else any you can destroy a lot of parts. If you don't have the right soldering equipment take it to one of your qualified tech friends. job done.
Fixed my brake light staying on and flickering and my burned out cluster airbag light causing my truck to do 5 beep la 5 times all at once, air bag light started working and brake light went off! Thanks
I was watching the video from 2020 about the 2004 Ford f150 brake light issue and I don't see a second video on how to fix it. Did you not make a second video for it?
Mine goes on then goes off for over a month. It’s happen twice now where randomly my truck got really rough. Started thumping as if I had a flat tire or something but I didn’t. Yesterday after I got home there was smoke coming out from the driver wheel well. Any idea what that could be?
@@gqautodiagnostics I filled it to the line and I noticed there was a sensor that was connected to the front of the brake fluid but there wasn’t a click on for the others end so it’s just dangling
@@gqautodiagnostics I’m driving long distance on an expressway right now in a 2004 F150 not even using my brakes in the ABS light just came on what do you think that could be
People like yourself that take the time to show others make the world a better place 👍🏻
This also fixed my other problem where i was getting 5 Beeps indicating an air bag problem, it was driving me nutts! Thanks for the Video!
Glad to hear that you fixed your problems. Thank you for sharing 🙂 have a blessed day.
I don't know how it happened!! But I just removed the lid and moved the plugs a little and it's good! Like magic and tomorrow I have an appointment with emissions 😅 so! Thanks a lot ❤
Amazing!
Thanks for this video! I just did my rear brakes on the 2004 F-150 due to a chewed up rotor, and the light didn't go out. I will check the dash cluster like you showed us and check if it is the issue. I always thought it was a bad switch for the E-brake, because the light stayed on intermittently, but this looks more promising. Thanks again.
Hello. I am glad that the video gave you some new insight. Keep me posted. Please consider subscribing to the channel.
Thank you and God bless
Did it work? I'm struggling with my 2005 light...
There are two things you absolutely do. First, suck the solder off the connector's pins on the circuit board and add fresh solder with a good quality flux. Second, solder both ends of the bigger black resistors. They have numbers written on top, usually 151 or 820. Those that are mainly on the upper left quadrant are suspect but look for all the big ones and solder both tab ends. Don't worry about other parts. Those ends frequently have cracks in the solder. You must have a temperature controlled soldering pencil and quality flux. Anything else any you can destroy a lot of parts. If you don't have the right soldering equipment take it to one of your qualified tech friends. job done.
Thank you for sharing.
Man you're awesome bumped my parking brake😂
Thanks! I was skeptical, but that was it. A little cardboard folded up did the trick.
Hello. I am glad that the video helped you. Please consider subscribing to the channel and God bless you.
Fixed my brake light staying on and flickering and my burned out cluster airbag light causing my truck to do 5 beep la 5 times all at once, air bag light started working and brake light went off! Thanks
I tapped on dash, light went off for a bit, dash connection problem
MY TRUCK BRAKE LITE is on i will do this,thanks.
Did it work?
I just removed the connectors , sprayed them with electronics cleaner Problem fixed that was 6 months still ok
I was watching the video from 2020 about the 2004 Ford f150 brake light issue and I don't see a second video on how to fix it. Did you not make a second video for it?
Your like 👍 and a new subscriber thank you sir
Thank you so much!
nice. Going to try this tomorrow. Just replaced my ebrake shoes and it hasn't gone off. Hopefully it isn't crossed wires.
Hello, thank you for your comment. Please keep me posted and please consider subscribing to the channel and God bless you 🙏
Good communication
Thank you for taking the time to post your comment. Have a great day and God bless you 🙏
I have the same problem i just dont know how to deal with the Pins inside of the left block
Did you make a second video fixing the cluster? Was it a ground issue or poor solder? Searched your videos didn't find part two... Thank you!
It's the solder on that connector. Did a touch up on my truck and fixed the problem
thanks for the tip
You are very welcome. Have a great day and God bless 🙏
Thank you! Its fixed
AWESOME!!! Thank you for the update. Keep up the good work and I will see you in the next video.
God Bless!
Thanks brother!
You are welcome. I am glad that the video helped you. Please consider subscribing to the channel and God bless you 🙏
Thank you so very much buddy
You never made the other video did you?
Is there a second video on the fix?
Mine goes on then goes off for over a month. It’s happen twice now where randomly my truck got really rough. Started thumping as if I had a flat tire or something but I didn’t. Yesterday after I got home there was smoke coming out from the driver wheel well. Any idea what that could be?
Break Caliper is sticking sounds like. It'll cause the truck to thump, and jerk.
😀😀😀👍how did you fixed I have the problem for 1year told me please God bless you
I from San Diego California
I had same problem it was a cracked smd capacitor on back of the cluster.
Thank u sir
Hello, You are welcome. Please subscribe to the channel. God Bless!!
Haha I think he fixed it and then a week later he regretted not recording the fix 🎉
Hello. Thatnk you for the comment, I appreciate it. Have a great day and God bless you 🙏
You never did make a Follow Up video on how to fix that connection.
Hello is there a video number 2?
Hello, thank you for posting your question. No there is not a part 2 of this video.
Nice!!!
My brake lights is on but when I floor it on the first gear it turns off. but then when I go slow it turns back on
Check the brake fluid level
@@gqautodiagnostics I filled it to the line and I noticed there was a sensor that was connected to the front of the brake fluid but there wasn’t a click on for the others end so it’s just dangling
472 like it
This is way too common. Smh
What about the abs light
Hello thank you for commenting. But I do not understand your question.
What about the abs light?
@@gqautodiagnostics I’m driving long distance on an expressway right now in a 2004 F150 not even using my brakes in the ABS light just came on what do you think that could be
@@kjkj6362 only the abs light or the red brake light too?
@@gqautodiagnostics only abs light. I turned truck off and back on and now it’s offf. Brake fluid looks low, I will add fluid
@@kjkj6362 hello. Did you added brake fluid to the master cylinder? Did it help?