Video není dostupné.
Omlouváme se.
How To Install An "IKEA BEHJALPLIG" Sliding Hinge On Bosch, Neff or Siemens Integrated Dishwasher
Vložit
- čas přidán 4. 09. 2024
- In this video i show how to install the IKEA Behjalplig sliding hinge on an integrated dishwasher. If you have a kitchen with large furniture doors, then this video can help to put a door on your dishwasher with the step by step instructions.
If you are looking for the Behjalplig, then you should be able to find one here: amzn.to/3dLJNvL
Thank you, without your video I probably would never know about this system. Saved me from a lot of problems. Update : I had 145 mm distance from the bottom for a Bosch dishwasher and that is not mentioned in the manual. I used the 135 mm holes and everything is fine.
I came here to find out exactly what you wrote about the distance being more than 135mm. Thank you, sir!
@@develko glad to hear I am not the only one 😅
@DIY Helper thank you for this post. I bought the Ikea system and i saw i had 145mm and i started to think what now should i put it higher or what and saw you comment.
So you also had 145mm and did the A hole’s for 135mm and everything was great? I am planing today to do it and was realy woried…
@@brankosimeunovic3481 yes you can use the 135. You can adjust the front after that with the 2 wheels that grip on the telescopic bar.
Thank you I was already worried 🙏
Sensational video!
Tip for those who like me have a taller than A point on the little metal measuring thing (ABC..), just make sure your dishwasher is as flush as possible with the countertop and use the highest possible option ("A" in this case), even if your measurement is higher.
Worked for me with a Beko dishwasher that was +22mm higher.
Thanks for the great feedback
Can confirm with a Bosch that has 140 mm !
Can also confirm that it works on a 148mm offset dishwasher (Ariston / Hotpoint LTF 11M132C). I had to grind the stop blocks on the aluminum railings so it wouldn't catch, but other than that, works great!
This is the info I was waiting for the whole video. I'm at 150mm and was wondering if I should even try and assemble it or just return the whole thing to IKEA. Thank you!
Awesome video, gives you so much more confidence than the printed instructions. I just installed this with a Bosch series 4 replacing the Ikea dishwasher that died in our Ikea kitchen. Extra tips would be to emphasize that you need to install the dishwasher 1-2cm deeper when using this as it is a extra layer between the panel and the dishwasher, and also clearer directions on the last step with the two white clips to prevent the door from popping out of the clips on the installed bar at the bottom. Total lifesaver video. Thanks so much!
I had this device installed by a third party company, they did an awful job. I realized today that they installed the large plastic piece out of track, they never read the instructions. I managed to disassembly it and do it correctly thanks to your video! thank you so much!
Thats great that you have done it, well done. Thanks for the feedback
The staff at my ikea didn't know it existed. Even though they had 140 in stock.
Recommended an alternative of €110 from another reseller.
During the kitchen planning nobody mentioned anything about this problem. They only put 'old dishwasher at consumers own risk' in the order confirmation.
After I searched the Internet I found out about the sliding hinge.
After seeing your video I found the behalpjig hinge at the ikea.
Had to Google it because I couldn't find it on the ikea site.
Thanks a lot for saving me €60 and making it easy to install.
3 years later this video still rescued me from a 12 round fight with Behjalplig! Thank you
No problem glad it was helpful for you. Thanks for the feedback 👍
Thank you good sir! You really helped me get this done. The original handyman that installed it had done such a poor job that the door kept falling every now and then until I had to completely change the mechanism. Your video gave me the confidence that I can manage it. And I did :). Thank you again for taking the time and putting this together! Cheers from Bulgaria.
This is always great to hear that it was helpful for you. Thanks for the feedback 😊
Fair play. The IKEA instructions on this one were not up to scratch in my opinion. So thanks for the help, don’t think I would have sorted it otherwise for my 450.
Great to hear it was helpful for you, thanks for the feedback
Thank you for this video!! We've just used it to install our new Bosch dishwasher. The Behjalplig is a slightly different shape now and it didn't line up with the dishwasher door screws, but we just drilled new holes into the Behjalplig panels and it's worked fine. As below, our dishwasher was also approx 145mm at the bottom but the 135mm holes have worked fine. Thanks again.
Great to know this was helpful for you. Thanks for the great feedback 👍
I was a bit of a loss reading the instructions until I came across this video. Brilliant. Thank you.
You really helped me man... I spent a few days installing a new Ikea kitchen and than almost the same amount of the time installing this "PÄRAPLÖGICK" evil Martian mechanism... This video really helped me understand what's going on.
ikea support told me there was no other solution other than to cut the door down to 720mm to fit a hotpoint dishwasher. Only by luck I came across thr behjalplig hinge , great that a video exists and saves the hour you need to fathom out their awful instruction sheet, thank you
No problem. Glad this was helpful for you
Handy video, looking forward to installing it in 2022 when when its eventually in stock.
Hi, personal experience - they don't have it in stock, ie. you can't find it on-line but, to my surprise, they just put it on the inventory list when I was buying a "cabinet" for alternative dishwasher. Just told them I got mine (dishwasher) so they asked if I needed 'the kit', I said 'absolutely' and they just added this to to the order. Got this with all other items I ordered. Part number is 604.923.49 and current version has slightly different parts that go on the dishwasher (seems like cutting costs as they removed good chunks of unnecessary material). Got it all within last 2-3 weeks. Btw, it was IKEA in Poland.
I just bought it yesterday. Oslo Norway. Orderen in the kitchen department.
@@macshyha Bought mine in Hungary a week ago. Surprisingly they did not remove the material, rather changed the shape. The black thingy attached to the dishwasher is in the L shape. The rest is identical.
@@annamazurkevich1236 Yup, exactly. Looks like it's thinner towards the bottom (comparing to the version in the video).
Just installed it as per video and with assistance of manual in Romania. Still some space remaining when lateral supports flex in single screw. Any idea how to make it more rigid top side?
we are so grateful for this video! Where we live, we were not able to find any professional that would know how to install an integrated non-Ikea dishwasher into an Ikea kitchen and your video is a step-by-step guide. You saved us stress and some money - thank you!
No problem. Glad this was useful for you
Thank you sir! I just had my kitchen installed without the dishwasher door. I used Samsung's instructions only to realise that the 80 cm Ikea door just wouldn't work. Now I know that I have a solution. Have a great one!
That's great to hear it was helpful for you. Good luck on getting the door installed. 👍
@@lords-electrical Aaaaand it's done! Thank you again! 🙏💃
So finally plucked up the courage to fit the door slider, using your video it was quite an easy task ! The door woods were a slightly different shape but I guess a couple of years has passed since your video was shot apart from that it was exactly as you showed….quite chuffed, enjoy the coffee !
Great to hear the video helped, thanks for the feedback.
My kitchen is from IKEA and my Dishwasher is Bosch. This video has made me aware of this product and showed me how to fit it in. Thanks very much
Glad it was helpful!
Best installation video I've seen saved a lot of brain ache. I'm trying it on 45cm machine into a 60cm space, fingers crossed.
Good luck!! Thanks for the feedback
Thank you absolutely brilliant have bought same for my IKEA kitchen had two kitchen fitters who were unable to install my dishwasher. Thanks to this video I can do it myself 👍 God bless.
Glad it helped
Thanks a ton for this video, you saved me from panic from looking at Ikea guide. All went well with following you. Greetings from PL.
This was very helpfull and very clear. I haven't even look at the manual, I just watched what you did and copy-pasted it.
Glad it was helpful thanks for the great feedback
Excellent video and thank you. Was a pleasure to fit this product and I would have struggled without your concise and accurate instruction.
No problem, glad it was helpful for you. Thanks for the feedback
Brilliant video! We couldn’t quite fathom the instructions and were struggling! A finished kitchen is now in sight, thank you!
Great to know it helped. Thanks for the feedback
Bought this about a month ago, even though I wasn't quite ready to go ahead with the installation of the door (and I'm still not), but I just found out that the product is no longer available in the Czech Republic and Germany. So lucky me!
Same with me
@@charliebrown6461 In the meantime, I have installed it. Worked well, but it was very fiddly and there's so little space behind the dishwasher, that pushing it in far enough was the most difficult part - together with getting the door onto the rail. But I'm glad I got this
An ancient proverb says "clamps are one of those things that a man can never have enough of". So time to buy (many) more. I enjoyed the video by the way: thanks.
Love the Ancient proverb. Off to the clamp shop I go. Thanks for the feedback
Thanks a million. I managed to do it on my own rather than paying someone else ton of money to do it.
That's great to hear, well done.
Thanks for explaining it In that easy understanding way.I will try to use it as to remove the existing panel with one of different Colour. Without your video I doubt I would manage.
Helpful video!! I am currently assembling my dishwasher and have a question: the hight with the open dishwasher door is 150mm instead of 135 mm 😩 Do you think it will work the same? Thank you again for the great work!!
Yes you should be to go with the 135mm hole as other people have had the same issue
Thanks for making this. Just off to get one, the only suitable alternative is about £110-130. I was scratching my head big time with the door fouling the base of the dishwasher. It’s silly that the Ikea kitchen planners aren’t advising on this. My guy was useless.
Thank you for this video! I was desperate because I didn’t understand the ikea instructions and your video was really helpful!
Glad it was useful for you. Thanks for the feedback
Great tutorial, thank you for all the little tips and tricks! I found myself in the situation where the whole kitchen was already built up, everything else was mounted in place and the dishwasher front was stopping the dishwasher from opening all the way up, so I found this video which was really helpful for finding a solution for my problem, but the more recent problem is that Ikea doesn't build or supplies this sliding adapter set anymore, so if you're lucky enough like me you will still br able to find this adapter on eBay or Facebook marketplace, but just a heads up, you won't be able to buy it anymore in Ikea, at least not in Germany. It's quite sad because when planing and buying your Ikea kitchen there are no such warnings or "heads up" that the front won't match other dishwashers other than the ones solyby Ikea, it would have been of great help to have known this before I bought and installed my new kitchen. Once again thank you for your help and good luck with your future projects!
Thanks for this feedback, i have just checked and the product is still available in the UK, so not sure if some countries are finishing it, or just out of stock.
@@lords-electrical great tutorial video, one question, why did you place the parts 19mm in from edges. Ikea show them flush with appliance door.
@@tonygrace4946 in the manual it's 19mm 💁♂
Your video has helped us so much today! Thank you for sharing your expertise in such a calm and professional way. It was super easy to follow your instructions and saved us Anglos deal of tears and time 😂
No problem glad it was useful for you 😊
Thanks this video was really helpful and I'm now feeling relatively confident to fit a new hinge to my dishwasher. Thanks.
WOW. Thank you so much. I am able to assemble IKEA products fairly well but this video knocks it out of the park. I was considering building an entire kitchen in a new house here in the Philippines and have decided to do it.
Again thank you Sir.
Great to know this was helpful for you. Thanks for the great feedback
Awesome video, gives you so much more confidence than the printed instructions.Thank you for posting this.
your video helped me a lot Greetings from Poland 🇵🇱🇵🇱👍🏻 there were some modifications
This is great help! 🙌🏽 Couldn’t make it any clearer! 🙏🏽
Thank you! This was extremely helpful, and I enjoyed your pleasant and friendly vibe.
Thanks very much 😊
For future users of IKEA Behjalplig sliding hinge :)
The way he installed those plastic sliders with rotating wheels is wrong (11:55). They should be installed opposite than he did. The height-adjusting wheel should be at the bottom of panel. With this way of mounting (as the original IKEA instruction says - it is with mistake) the front panel will be sliding down everytime because of weight and you won't be able to adjust it properly.
I came to this video to try and shed some light on this exact problem. I figured that there must be something wrong with the system, because I followed IKEA's printed instructions to the letter. I'll try your solution and see if it works. Hopefully this also makes the white plastic locks more accessible.
I really don't understand what's the issue.
@@SavaKrstovic, the door doesn't keep the height adjustment you set from the two wheels. The wheels aren't tight enough in their plastic bushings and the weight of the door pushes down on them and slowly turns them back to the lowest adjustment setting.
@@AdrianSilea ok, I've got it. But how to install them opposite then he did, and opposite of instructions? I'm asking because I'm in situation that I'll need to use this solution because I'm assembling new kitchen and the parts should arrive next Saturday. And, by the looks of it, it's actually the same as the one on the video (LERHYTTAN).
@@SavaKrstovic , I believe the backwards installation tip isn't feasible. I am working on a different solution as we speak and will test it in about half an hour. If it works, I will make a video about it and send you the link.
IKEA doors are longer than standard doors and for that reason the rails of the hing are longer. Make sure that you know the dimensions before you go and purchase it.
thanks for this. The instructions were a little tricky without your guide. much appreciated
Thanks a lot for this amazing explanatory clip! :) We successfully managed to attach the IKEA front to our Bosch dishwasher.
That's great to hear this video was useful for you
Thanks for the feedback 😀
Thank you so much, great Video. I would emphasise to viewers to watch right to the end as it turned out to be very important for me.(those little wheels and what they'r for) Thanks again. I'd have been lost without you. Cheers
I’ve got round to fitting mine. Regarding the two side screws on the dishwasher door. That wasn’t sturdy enough for me.
The manual seems to skip using the original attachment lugs that the door would usually hang from, I didn’t see you acknowledge it either (when you mentioned nearly bashing the counter with the clamps.
I took a punt on attaching the lugs that slot into my door and it’s a lot firmer fitting to the dishwasher now. I can’t see how those two thin screws would last long term. Maybe I missed something.
Also have a similar problem
Thank you for the video, now i can assemble it correctly! The ikea manual wasn't very clear about sliding the two plastic things on the rail.
Super vidéo! Même chez ikea, ils ne m'avaient pas conseillé ce mécanisme. Mille merci👍🏼
Have just spent an hour sat on the floor in front of the dishwasher getting very frustrated trying to put my IKEA door on and getting no answers online.
So glad I found this, by far the most clear and concise tutorial I’ve watched 😅 now feeling relieved and away to order this product. Thank you!!
Sounds exactly like what i did before making this video. Glad it was helpful for you, and thanks for the great feedback.
Excellent video - I have hit this problem today with a Bosch dishwasher.
Thank you very much, now I know that this will suit my dishwasher! Very helpful to see such a detailed video, it saved me a lot of time!
Glad it was a help, thanks for the great feedback
That's the internet advice I was looking for! Thank you! 😊
No problem, glad it was useful for you
Bravo. Very clear and useful. Good job. My wife said she would marry such a man like you. I have still a lot to learn then... greetings
Very helpful. Wondering if you have the same problem as us with this after 8 months of so of use. Because the two inner verticals are only screwed on half way up the dishwasher door, we are finding that there is too much flex and the door comes away from the dishwasher a little bit with every opening - it’s not damaged yet, but all feels quite cheap. I’m concerned that that is only going to cause real problems over time, and am probably going to make two little U shaped clamps or bends of metal to grip the slider mechanism too the dishwasher itself
That sounds like it could work, it also sounds like the dishwasher may not be screwed in correctly, or may have moved slightly if the door doesn't open smoothly. I have found mine is still ok at the moment.
Usually there's 3 holes on each side of the dishwasher's door to fit a 'normal' kitchen door directly. The dishwasher comes with 6 long screws for that reason.
You should try using those holes to secure the sliding mechanism with additional screws. The holes are covered with short screws that you need to remove first, FYI! There's one at the top, one in the middle (which is used by the sliding thingy according to IKEA's manual), and one at the bottom on each side.
Pretty stupid that IKEA use only 2 screws! Thanks for the heads-up, BTW! I'm about to purchase one for myself.
Thanks David Brent, that was such a great video.
Thanks so much. This is a brilliant instruction video and I don't think I could have managed without it.
You're welcome!
Question about pushing the dishwasher back 1cm when the door was sitting proud. Did the horizontal bar at the bottom need to be relocated too?
No it didn't need to be relocated
Thank you very much!! Without your movie I would not put it together!!!
❤❤❤ спасибо большое дружище, выручил как никогда кстати ❤❤❤❤❤
Thank you, this helped me find the product I need to buy in order to finish my kitchen.
No problem, glad it was helpful for you
Decent vid. Really helped me visualise it before I install.
By the way, I would call "the plastic part" a shuttle or trolley.
I'm just gonna say thank you, but I would gladly buy you a beer.
Awesome video - absolutely terrified at doing this but you made it all very easy. Thanks mate
Thank you very much ! I didnt' think I could be able to do it by myself but I finally made it thanks to your super clear video !
Glad it helped, thanks for your feedback.
Can I ask please , my dishwasher is in between a base unit at 60cm and end panel at 62cm - can I ask how that works please
You are amazing with a very humble and helpful heart. Thank you so much for making all efforts and time to create this video. This will be very helpful. I am planning to install the same today.
Thanks for the feedback, good luck with your installation
Dear Lords Electrical. Thank you for your video, but I would like to ask something: what if I measure at the first step 160 mm insted of 135 mm? The instruction guide doesn't include this opportunity, that what to do if the height is bigger than 135 mm. Thank you for your reply in advance.
Did you get a reply? What did you do?
Mine is 150mm
Thanks for this useful and well explained video. I am about to install the Behjälplig today and this will help a lot.
Thank you for this video, very usefull. I am about to install my Behjälplig. This way more usefull then the manual.
Thank you so, so much for this video!! We would have been lost without it (we were already lost with step 1 and 2 ikea instructions ;-)) Greetings from Germany!!
That's great to hear that it was useful for you. Thanks for the feedback
Thanks so much for a very helpful video. I wondered if you might be able to help with a question. The distance of the opened door to the bottom of the cabinet in my case is about 150mm, do you know if that means I should use "A" on the tool, or is 135mm meant to be the maximum? I.e. that would imply the hinge won't work for my model (a Beko).
It should work ok, if you use "A" then you should be fine as it has worked like that on another one i have installed. Good luck and thanks for the feedback
@@lords-electrical Thanks so much! You've done a real service with the video.
@@charlesknox-vydmanov9609 Hello Charles, mine is also 150mm. Have you used "A" on yours and did it work without problems/side-effects? Thanks!
Thanks for this great and useful video! I am about to buy this for my new bosch dishwasher, but before I do that want to clarify something. At the end of the video you mentioned after fitting in the system and the door, the whole thing wasn't in line with the other cabinets but that we can push it back until it sits flushed with the rest of them. When you push it back did you also had to move the horizontal bar that you installed at the beginning? What steps would you recommend in order to avoid mistakes and installing it correctly from the beginning? Thanks!
Wspaniały film oddający bardzo dobrze instrukcję zamontowania tych prowadnic. Dziękuję bardzo za pokazanie szczegółowo montażu. Pozdrawiam!:)
Nie ma problemu, cieszę się, że było to dla Ciebie pomocne
Man thanks so much for the video. Got everything done but for some reason my rotating bar at bottom keeps popping out of holes. Really sucks cos I thought I had everything perfect and this mechanism is really bad as it does not push very hard to to the side cabinet.
From memory, this is where the dishwasher is not quite square in between the units or not screwed in as tight as it should be.
Love what you're doing here. Thank you for posting this. Would you please measure the distance that the sliding mech uses from the inside of the cabinet door to the front face of the dishwasher? I've only got a max of 9mm to move it back further. I could cope with a 1mm protrusion but much more than that and it will look wrong! I can't see the thickness it needs on the Ikea website either, so really hoping you can help! Cheers
Thanks i needed that the installation instructions may have well been written in Chinese
Glad it was helpful for you.
Awesome, thanks for the breakdown. Only annoying thing is that the white clips at the end don’t stay in place. When I close the door fully they fly out. Any ideas?
An excellent video, made the installation so much easier! Thank you so much.
Thanks for posting this - really informative. I think I'm going to have the same issue as you with it protruding slightly. Does the bottom bar have to be adjusted for this (as in will the bottom be sticking out also, and the holes need re-drilling?) or is it adjustable? Cheers!
I fitted this today and no, the bottom bar does not need adjustment
As a Swede it's always fun to hear non-Swedish people pronounce Swedish words. But it's also kind of strange that IKEA use Swedish words. Anyway, the word "BEHJÄLPLIG" means helpful and the H is silent.
Ah thats great, i didn't think to translate it, but it was certainly helpful for me to get the dishwasher door on. Thanks for the feedback
You might Just have saved my weekend! I have a question, will this not make the kitchen door further out in the room so it is unaligned with the other fronts? With this system in between there has to be some ekstra space? If you understand what I mean
When it is all in place the front of the furniture door will match with other furniture doors in the kitchen. You may need to make sure there is a little extra space for the dishwasher to be pushed back compared to the standard way of fixing the door on.
Thank you so this video helps me so it's like magic.
Great. Thank you for the instructions. Greetings from Germany
Hi,
Firstly:
I wanted to say what a great video this is. Really clear and easy to understand. Great work!
Secondly:
I bought a second hand sliding mechanism and it came without the installation metal guide for holes. A,B,C,D,E. Does anyone still have that and could they measure for me the position of the holes, from the bottom and left side of the guide?
Thank you in advance
Very useful thx !
They changed the design, or it is not the same around the world. The one I got is in plastic and is very flumsy. Only one screw in the middle of the dishwasher to hold it is def not enough. They didn't update the manual and tell us to put only 1 screw and that's really not ok. They also say to check the manual of the dishwasher itself to know if you can drill through it but it is not mentionned in the Ikea dishwasher bought at the same time ...
Thank you for great work... Amazing 😊 I have needed that support...
LG from Germany
Thank you for your video. So am I right in thinking that the left and right black strips that you fit to the 7:13 are only held on by one screw on each side?
One of the best videos I have ever seen! Watched and performed today - brilliant result. Thank you very much for your effort! Best regards from Germany!!
Glad it was helpful for you, thanks for the feedback
Thank you very much! Perfectly explained. Great job!
Hi, thanks for this video its extremely helpful. May I please ask, as you mentioned at the end of the video the door can stick out because of the sliding hinge mechanism, however I have no more space behind the dishwasher to push it further back so is there any other way around the door sticking out? I want the door to be flush or in line with the other cabinets. Thank you :)
One screw isn't enough for mine.. It's some sort of a plastic frame that we have and screws don't hold
What a brilliant video, thank you for taking the time to make it.
Brilliant!!! Thank you very much!!!
Thanks so much for producing this video, it was most helpful.
However, having (I thought) completed the installation for my dishwasher, the door has now fallen off for the following reasons:
1. The strips down each side of the face of the dishwasher are only fixed with 1 screw on each side, in the middle, as per the Ikea instructions,; the L shaped metal strip which holds the 2 strips in place across the top has no attachment to the face of the dishwasher. Consequently, it pulls away as the door is opened.
2. The above adds stress to the 2 screws retaining the strips and because the screws are not long enough the whole thing just pulled off.
Looks like I will have to find longer screws and also use these to screw the side strips to the top of the face of the dishwasher. This assumes that I can remove the factory installed screws to do so.
Unless I have made a silly mistake I felt others should be aware of this potential problem. Any thoughts you might have would be appreciated.
It sounds like you have done everything correctly, i am not sure why the door will have fallen off?
@@lords-electrical thanks for replying. Again, its a combination of there being no fixing at the top of the 2 side strips to the front of the dishwasher As you say in your video there is only 1 fixing to each side and that remains the case once completed. This means that when you open the door, the side strips as well as the metal bar linking the 2 strips, falls away from the face of the unit and only remains attached via the single screws each side. In my case It would appear that the screws supplied by the machine manufacturer were not long enough to properly bite into the side strips, so it fell off after a couple of times opening and I will have to source longer ones.
However, I dont think that a single fixing each side is sufficient anyway for such a heavy door. I contacted Ikea who said they would call me back. I'm still waiting for the call!
Hi, I have the exact same problem so I was wondering whether you found a solution to the cover door not being properly secured on top? I wouldn't dare put longer screws through not knowing what the electrical system looks like inside the dishwasher door.
Hi mate, when you pushed the dishwasher back to have everything flush, was it just the top that needed adjusting? I take it it was already flush on the bottom due to it being located with the steel rod?
It is not just the top, it is the whole of the dishwasher to make flush. Don't forget the steel rod at the bottom is not actually connected to the dishwasher, just the furniture door
Thank you so much from Hungary! Thanks to this video I was able to finish the kitchen myself.
However the door is leaning on one side. I tried the roller in the mechanism, but it looks like I could only adjust both of them at once. Do you have any advises or ideas?
Thank you once again, the video is great!
Not too sure what it could be, i would first off all check to make sure the dishwasher is level. If it is level then there shouldn't be a problem with the door being straight. Good luck
Bonjour et merci infiniment pour votre vidéo sans laquelle, je pense, je n'aurais pas pu ou su monter cette façade de lave vaisselle.
Alors oui, un grand merci à vous.
Content que cela vous ait été utile, merci pour votre retour
23:20 what if those wheels aren't strong enough to keep the door in place? I have an IKEA kitchen I have just bought (1 month) and the door keep sliding down for about 1 centimeter despite using said wheels for trying to fix it
I have been using this system in my kitchen for about a year and it has been fine with no issues
I have the same issue. Do you have a solution?
Thx for the great video. Just one question. Those brownish plastic thingies on the back of the door. You need to screw them down on both side right? That’s not really obvious from the manual and unfortunately you are going over this pretty quickly, too
Yes they need to both screwed in place.
Thanks for a great video :)! Do you know if this also works for the 45cm dishwasher, been looking on the specs of BEHJALPLIG and also amongst the comments below and seem to have missed it if the info is there.
Hi and thank you for your video. I have a problem. I want to roll up the front, but it will roll back down slowly by itself, just like it’s too heavy. Is there a stop mechanism? Do I miss something?