what tools do I need as a scrapper?
Vložit
- čas přidán 22. 02. 2021
- In this video I go over what tools a new scrapper may need to get started scrapping, and some tools they may want down the road, this is my no means a full list of all the tools a scrapper may use or need,
Thanks for watching, Please Subscribe, Like, & Share
“As an Amazon Associate I earn from qualifying purchases.”
www.amazon.com/shop/okiescrapper
looked like the cat wanted to steal the show great video thank you
yeah peanut butter likes to get into the videos, I may have to put him up a channel some day, Thanks for watching
You kept walking past the vise. That comes in handy, sometimes. LOL!
yeah after I finish the video it dawned on me that I didn't mention the vise, or hammer, I did a short clip on the hammer and added it, thought about the vice after that, and I almost forgot the magnet, Thanks for watching
Love it
That is what I started with
Hammer, ax and adjustable wrench
Bucket with tool bag
Good advice
thanks Adam we have to start with what we have and grow as we go
Thank you from another Okie. Southwest Ok
You are so welcome Bradly
Excellent video and tips for new scrappers
Glad you enjoyed it, Thanks for watching Rob
I can't believe you haven't picked up those 420 channel locks yet my go-to tool. Cheers from Jacksonville Florida
I use them a bunch, good for prying, bet the weather is warm down their
Very good list.I just purchased some big toys last year such as my torch but we do a lot of commercial jobs
Keep on scrappin
A torch is a nice thing to have for cutting short iron (prepared steel) and other job's too, I bought my tanks about 25 years ago. Thanks for stopping by Dylan
I have a small gen in my truck all corded power tools. Old school tools. I have pipe wrench with cheater bar for those tough pop off valves and the normal tools you displayed. Also nice having generator to test stuff on the spot to see if it's a working item. I do a lot of cutting at road side so I can fit more in the truck. Like chairs tables so everything lays flat.
That sounds like a nice setup, being able to cut on sight is nice. picked up a few swing sets and no way to cut them down. they take a while to pull the bolts out, the generator is a nice touch, I have a 500 watt inverter that I used to run a small air compressor when I was doing junk cars, now I have a 1 gallon cordless Ryobi, Thanks for watching
hello scrappers, watching while i scrap myself, have a great day
Thanks, you too!
When I go curb side scrapping my essential in-the-car tools are: (a) A magnet, (b) a pair of side cutters and (c) an impact driver with a long number 2 philips head. I reckon you should add a hand file to your list, since that can be used to work out if its brass, ally etc before you fork out for a bench grinder or angle grinder. You can tell the difference between stainless and aly by how soft it is when filing.
I did mention a file toward the end of the video, if you look at the thumbnail pic it is inside the hack saw. yeah that is a tool that I rarely use, but is needed if you don't have a bench or angle grinder and starting out may not have much cash to work with, a file is cheap
Nice shop that is what I need hang in there thank you
Thanks Joseph, take care and thanks for watching
I keep on moving in a small total of water to put under anything I'm grinding when I'm out collecting scrap
It's kind of nasty though keep bleach in the water
Very useful information thanks for the video.
You're welcome, Thanks for watching
11:13 Peanut butter was trying to point out the blue handle Channellock pliers.
Top five.
1 Magnet
2 Side cutters
3 Cordless impact driver
4 Channellock pliers
5 One BIGGGG hammer
yeah I almost forgot to mention the magnet, and I ended the video then thought about the hammer so I made a short clip to add to the video,, Thanks for watching
Good advices there buddy👍👍👍
Thanks 👍Thanks for watching
Hi. New to the channel. Thanks for the tool tips and for going over how to tell aluminum from stainless that was helpful. Peanut Butter was a great helper.
Glad it was helpful! welcome to the channel and thanks for stopping by
I have remember to get some of those twine cutter blades
they work well, I used to use the flat standard blade but they would go dull so fast so I started using them, Thanks for watching Red
Its relaxes me lol
glad you enjoy it
I know what ur sayin 100% I been a scrapper for 17 years an worked at a scrap yard as well I just like watchin u do ur thing puts me to sleep lmao
should I make a loud noise or yell at times or are you wanting to sleep, lol. I like to get some work bench time every day if I can, helps to unwind and relax
Hi Allen. Sorry I'm a little late to the party, but I've been preparing for heart surgery a week from today.
Great video, very informative. ☮️
for you? or are you doing it to someone else? lol. You take care of your self Randy, thanks for letting me know, will lift you up in prayer,
Allen, it's on me. Thank you for the prayers!
You just earned a subscription from me! Keep up the great content. Right up my alley!!! BTW I take EVERYTHING apart myself. Like you and K&D. I even unwind steel BX so I can strip the copper inside. LOL Not too time consuming either.
welcome aboard, K&D has some good videos, Thanks for watching
In al scraps if in need to use tools number 1 well be screw driver an wrench thin flat tip screwdriver
Hello there from Montreal Canada 🇨🇦 well you pretty covered it all thank you for sharing hi Peanut 🥜 Butter 😃🍺👊🇨🇦
You are so welcome Rob, Thanks for watching and stay warm up there
I like those Diamond wheels a lot ....way safer
yes they are, and they last a long time, Thanks for watching
BIG SMILE
Thanks for watching
Hmmm. Tools as a scrapper.... A hammer, a bigger hammer and a bigger bigger hammer. Band aids come in handy too
lol. not much you can't do with a hammer, yes Band-Aids the wife made sure that I have a first aid kit out here in the shop and in each truck
Pozdrawiam
Thank you, and Thanks for watching
I know you have probably answered this, but how do you get the stuff to scrap? Due you buy electric motors and stuff at auction? Dumpster diving and curb finds are getting harder with allot of new scrappers
well tom I live about 6 miles outside of a small town and we have an electric coop, and they put out a small paper every month, and I run a free add in the paper for scrap metal wanted, also the town has a transfer station that I can go to and get scrap, the transfer is like a dump, except they have a compactor for house trash and 4 roll off dumpsters for the bigger stuff. a recycling bin and a place that people can dump scrap metal, there are a few others that get scrap from there. I listed my add this month, I have to have it in by the 10th for it to be in next month's paper. March and April may be a little slow but come May I will be very busy. another town that I drive through on my way to work is having a large trash pick up soon. thanks for watching
U dont need that many cutters just 1 to cut wire off of things an copper things like that bend it in to pecies tell u get done with object thin cut it up
I was showing the different cutters that would work ,and that I have seen people use, so if they had any of them they could use it to start, I was not saying they needed all of them. Thanks for watching Jason
A veiw
Does the cat go with the tool box
no he is the wife's cat. he doesn't know it though
HAMMER!
I got You, you didn't watch till the end did you?. lol. yeah I forgot the hammer and then did a short clip showing a claw hammer, a ball peen, and a cross peen hammer and added it to the end of the video, but the hammer should have been in the top 5 tools, Thanks for watching
@@Okiescrapper no I did I was shouting hammer at the beginning. I have 10 just in case I can’t find the other 9 🤣
A magnet
I did mention a magnet. I almost forgot to. Thanks for watching
Missing one very important hammer .just saying
what kind of hammer I show a straight claw, a ball peen and a cross peen at the end of the video, I did forget them and had to do a short clip of them and add it to the end. Thanks for watching
@@Okiescrapper u could watch my once