WWE Toys - Build and review of Toy Figure wrestling ring WOW!
Vložit
- čas přidán 23. 12. 2015
- I build my new wrestling ring from www.wrestlingsuperstore.com and also give my review of the build quality. Check it out!
Come hang with me at wwpweewestling
I've owned plenty of these. It's a clone of the Jakks Scale Ring. The metal posts bend so be careful with how tight your ropes are. I wish this ring had a steel cage. The ring aprons are a big plus for the ASR but for ropes. I just ordered tons of elastic from eBay. the plus for the WSS ring are the buckles are easy to get on and the posts are one color. Each ring has pros and cons. It all depends on what someone prefers.
+Eric Williamson I agree I am now noticing the apron sway to big, some how i need to tighten it up for the wrestlers to stand better
+WWPWEEWRESTLING did you put the straps under the middle piece where the post and leg goes? That's what always was for me
+Eric Williamson yes I have tried a couple ways. I think what I am going todo is velcro the sides to the ring and paint the top a gray or color like todays matt I am not sure yet. I am getting ready to start stop motion with a whole new story line so something has to happen lol
+WWPWEEWRESTLING id say use double stick tape and really pull down the skirt/ mat for a cheaper result. If you wanna spend a few more bucks, go to www dot ringskirt dot googlepages dot com and they sell ring Mats and skirts. A friend of mine makes them. You can get your logo on all of the stuff. I have my logo on all the stuff made from him. Hope to see your videos soon I really enjoy what you did with the setup.
+Eric Williamson thanks for watching :) I will check out your friend asap!
The ring is no longer 59.99, went up to 79.99 like the WWE one.
4:41...the ring is 21 1/2 x 21 1/2 inches.
I own this ring, and I'm going to say this, he's right about it, this is a really good ring. My only complaint is that the ropes are a pain to get on, but it's worth it.
I'm currently trying to work on getting the ropes and turnbuckles on it now. It's a pain in the ass
I've found it's easier if you put the ropes on three of the corner hooks, put the turnbuckle pad on the fourth, and then unhook the rope one corner at a time to put the pad on. It's much easier than putting them on one corner at a time.
I have a wwe scale ring love mine plus on ringside collectables you can get different color ring ropes plus they have other ring skirts did mine in WCW look which I got from them
WWWcviol32🎂 gráfica mixta Austin
Im kinda older now and dont have many of my figures anymore but i always wanted this ring when i was younger still kinda wanna get one for centemental reasons
you won't regret it, nothing wrong with fulfilling a dream :)
There are some bad reviews, but this is my first ring that isn't 20 dollars.
Anyone know if the ringposts would work with the old jakks rings like the hardcore action ring or the attitude cage ring ?
Where can I get it because I’ve looked for it everywhere and I don’t know where it could be
Amazon has one but I don't know if it is made by the same company.
Update yeah it is made by the same company. Just buy it from Amazon.
You put the ring mat on Wrong. That’s why it doesn’t fit tightly..
Can you put the other ring Aprons on this ring?
Any update to this question?
Yes and no. Yes, there are other types of ring mats with aprons you can buy for this ring, at wrestlingsuperstore.com, I think there's a solid blue mat and apron, and there's a light blue mat with blue apron for it. No, the mats and aprons are one piece, so you can't mix and match. None of them have logos.
do those ring posts fit on the mattel one
No it’s too thin
CMITCHELL505 thank you!
I 100% agree with u on this. I own the wicked cool toys and I don’t really like it. cus the apron is like short and I can put my whole hand inside it and it flips. My stepmom bought this for me and I excited to unbox this. The rubber turnbuckles is a PIECE OF SHIT TOO. ITS LOUD AF WHEN I MOVE THE RING AND THE ROPES IS WOBLY I CANT DO A REY MYSTERIO 619.
wwe didnt make it wicked cool toys did
potato....pataaaaato
talk louder
fixing the audio :)
U can see me
sorry I should not have said that
This ring went up to $99 but at least it's better than the wwe one it's not too big it looks very easy to build I don't have this ring yet but I'm looking forward to getting this ring also it'll be my very first scale ring