Alternator internal component testing
Vložit
- čas přidán 19. 12. 2015
- A comprehensive video covering the testing of each of the main internal components of an internal regulator (IR) Alternator. Tests cover Rotor windings, Stator windings, Brush pack, Rectifier and Regulator units. Extremely useful information when trying to diagnose Alternator faults...any questions please ask, I check my Channel daily. Also check out Charging Systems ON CAR video too...
- Auta a dopravní prostředky
I watched this video about 3 years ago and thought it was outstanding . I just wayched it again today, and will probably watch it again. Very good video !!
Thank you :-)
Best video to learn about how to diagnose Alternator for faults.
I fixed my alternator using this video. Taught me how to diagnose the problem. Found an issue with the 18:22 rectifier on mine, searched online for the part number and part I needed, ordered the rectifier and new brushes ($38shipped w/tax), installed them... tested it out at autozone... and tests showed 100% good. Previously, the test at autozone, showed bad. AWESOME!
where did u find brushes and rectifier?
Great video explaining how all the components work. If your alternator fails it’s 99% caused by worn brushes. Before brushes completely wear they cause sparking which can damage the slip rings through overheating and premature wearing. If you get a red battery warning light on your dash don’t ignore it. Generally, swap out the brushes and you are good. The hardest part of any alternator repair is getting to the alternator and getting it in and out of the car!
Absolutely fantastic work. Thank you. I used to have fractional hp motors rebuilt (1970's) but no body does that anymore. Seeing this I really understand my vehicle so much better. I have found kits here in the States to rebuilt alternators. I'm amazed. Like you say shops won't do this because of labor costs but I can fix my own. Empowering.
probably this is the best video out there on how alternator works and how to properly understand what's going on to fix it, thank you very much
An absolutely fantastic primer on alternators and testing their components. I wish my college teacher would have been that good. Hats off to you sir, and thank you for this great presentation.
Definitely the best and easiest understood video I have seen on testing alternator components with a multimeter, exactly the video I was looking so I can repair my alternators rather than replacing them and not knowing why the failed, thank you Andy Mechanic for making this video.
The best video on CZcams describing how to breakdown and test the various alternator components. Excellent job! Just what I was looking for. Thank you very much!
As others have said,I work as a hgv mechanic,but never really understood alternators,mainly due to the lack of this type of in depth training at college,what an excellent video thank you.
Andy check the time you posted the video and now(25/12/22) , I'm so grateful for the best lesson on alternator testing as I tried watching even by passing your video not knowing it had the full package. Thanks and happy Christmas to you and the family at large. Exceptional presentation ever!
I never leave comments but have made an exception. Beautifully clear diction and video thank you
this is one of the best videos regarding inspecting and testing an alternator I have seen. Well done. Good explanation while still relatively technical. Thanks.
I must say this is one of the most clear explanations on the subject, well done. I would like to chat more off the social media if you don't mind, and this is my email laz.mayumbelo@gmail.com.
I actually work as a car mechanic and I never really figured out how to measure an alternator when I was in school though we took some apart but this video has helped me a lot, finally I know how to test it. Thank you so much for a fantastic video!
No problem, pleased you enjoyed the video. Cheers Andy
Thank you for a great video on testing the components of a Denso alternator! You explained all of the parts and their operation wonderfully. Not another instruction like this that I could find.
super quality video / information! well done. my brain just grew
I've only just found you thanks to some land cruiser forums! I'm an automotive student at a polytech in tauranga and you seem like such a better tutor than I have, used this video to get my cruiser up and running
Awesome, great to hear you like the videos. Good luck with your course. Cheers Andy
At last, a real alternator video, not the dumbed down version we normally see on youtube! Thanks!!
No problem Mark, pleased you found it helpful. Cheers Andy
Thanks Andy, especially for emphasis on the diode setting in the multimeter, I thought my rectifier may have been faulty, I just had to correct the setting on the meter, just as you mentioned, make sure it’s set for diode testing, the symbol popped up on the screen and then all checked out ok.
Excellent video for diagnosing the internal components 👍thumbs up!!! 17:13 USA
Excellent in depth, detailed explanation on alternator function. Very very very well done!
Thumbs up , so far this is the best i have seen. All the way from Namibia , africa 🤓
I watched probably 10 videos already and still confused how to test an alternator. Once you explained the voltage regulator at 3:27" it all became clear. Thank you!
Awesome! Really pleased to be of help. Thanks for the feedback too. Cheers Andy
The best video about how to test an alternator. Very good explained.
Thanks :-)
Excellent video...always check the rectifier first before taking apart the alternator, 90% of the time that's the problem, sometimes you can even get it off without removing the alt. from the car.
Excellent video....well put together...concise....ability to keep the viewers attention with your very clear and precise instuctions
Excellent stripdown and diagnostics
Great video Andy! I went to Unitech nearly 20 years ago (shout out to Duncan Wales). Great that that they still have guys like you!
This is the best alternator repair video on youtube.
Your videos are always worth watching. This was great . I pulled an alternator at the junkyard today to use as a trail spare and I want to bench test it. I spent an hour looking at writups and videos of people testing output on the car but nothing that I needed to see. Then I thought I should check Andy’s channel and sure enough you have it covered! Cheers
This is an in depth training and I thought that I was in a class. Very informative and you took your time and spoke clearly. I'm not a mechanic but I'm trying to fix my alternator myself. On top of that, you also explained what each components do. You are a wonderful trainer and an educator. God bless you
this was a great refresher for me, I used to this in my high school auto shop class
Helped me a lot diagnose my alternator. Turned our my stator had a break and was making contact with the windings. I wish I checked this before replacing the worn out brushes.
Excellent video on the very popular Denso alternator. Thank you for posting such an informative and useful (to me, at least) video. I believe your testing of the Denso regulator is maybe the only clearly explained one available.
Great video ! Very impressive ! Hard to find this kind of basic teachings nowadays !
I subscribed.
What a lesson! Thank you very much for this comprehensive video!
Very useful video.
Thanks Andy 😊
Excellent tutorial on alternators, thank you sir
I found three alternators n took them home. Now that I saw ur video I can test them to find the problem n hope to repair them. I live in remote Community n this will help me a lots. Good video.
Couldn't expect more informative video. WOW! Thanks a lot! You're doing a great job over there
It doesn't get much better than this. Excellent!
This video is very impormative for me.. clearly explanation..about alternator mechanism..step by step..one by one..up to assemble material.. thanks for sharing your video ser
Appreciated.. great job..
Very well explained!! Kudos to you. Thank U
Super klip,do sada najiscrpnije objasnjen rad alternatora!
what an excellent video, clear communication and all the information, much appreciated!
Patrick kabunga. thx very much for all those educative videos, you make me love my trade
Viewing Guide:
Intro 0:07
Overview of the internal components 0:35
(Stator 0:50, Rotor & slip rings 1:29, Brushes 2:22, Rectifier 2:46, Regulator 3:26)
What and how we will test the components 4:53
Testing the Single Rotor winding & slip rings 7:14
Testing the Three Stator windings 12:47
Testing the Rectifier 18:23
Testing the Brushes 26:24
Testing the Regulator 27:24
Conclusion of this particular Alternator 37:32
Assumption/Alternate test method for Regulator test 38:38 & 42:44
How to properly connect the earth lead in the Regulator Test (common mistake) 39:30
Conclusion 40:20
Champ! Thank you!
Hai Andy like the way you teach from Zambia
You are such a good instructor. I have really enjoyed watching your video. Keep it up.
Excellent teaching and useful technical revelations. Thank you.
Thanks Andy ! Yours video is very good . You explanations easy to understand .
This is a great refresher for me too. Thanks much for making this video. It’s so nice to be able to watch this and get refreshed when I havnt done one in a while. Thanks again.
Michael. Liked and subbed. 👍
Damn, why didn't I find this video before? Anyone trying to fix an alternator needs to watch this. I'm not a professional mechanic, but I have been working on cars for friends and family for almost 30 years. Usually, I did the normal thing and replace the whole alternator if it was bad. On the car I'm working on now, a reman alternator costs about $160 locally. The whole rebuild kit is about $30. We need to get back to the old school art of repairing of parts, rather than replacing the whole part. That only serves to make the vendor more money, it isn't helping us at all.
So very true. Cheers Andy
Excellent video! Thank you!
Very good sir I am motivated
I have had good understanding through your teaching. Thanks
A very usefull video much appreceated .
Thank you, this saved me soooo much money. Tested all but voltage regulator and found all defects (missing bolt) on ground from regulator. Now its working perfect. Thanks again.
Great work...it's good to know the videos are helping people :-) Thanks for the feedback. Cheers Andy
You are awesome in your video and it's descriptive nature. Very comprehensive then you're wearing a great shirt too!
Very well explained and well done! Enjoyed watching! Thank you !
Cheers, appreciate your feedback Thanks. Andy
Andy Andy I love your Explanation
Thanks Andy, you explained it clearly and made it easy.
I'm beginning to fix alternators now.
Thankyou very much
Thank you the best explanation so far.
You being very helpful and you very informative....thank you sir 👍
Thank you very much. It helped me to understand better how to check the alternator.
A very detailed and instructive video. You have an understandable way of teaching. Other videos on the subject make my mind drunk.
Thanks Jamie, I do my best & enjoy passing on what I have picked up over the years. Appreciate your feedback & here's wishing you a great New Year.
Cheers Andy
Very helpful video, thank you!
Excellent presentation on how to test each of the Alternator components.tqvm Sir.
Thanks for this vid, very easy to understand, no waffle. It does help that i was diagnosing this exact alternator from my AE86! found a couple of faulty diodes, so hooray, it isn't mystery wiring issues after all...
Hi Andy, Greetings from Ireland. Thanks, this is such a great video. I have never had to deal with an alternator issue before now. The instructions are so clear and easy to follow. I would have been lost only for this. The best thing for me (in all your videos) is the detail you go into to explain what each component does and not just simply, do this or do that. Keep up the good work Andy, I hope you are keeping safe and well during this Covid time. Take care David
Thanks David, I'm pleased you found the video helpful, I appreciate you taking the time to send through your feedback.
Also, I just got an email to notify me of a PayPal donation from you! Again, huge Thank You, I'll be sure to put it to good use.
Thanks again & keep safe.
Cheers
Andy
As an educator myself, I must say that this is one of the best videos regarding inspecting and testing an alternator I have seen. i must commend you as well on making videos of the topics you are going to teach. the students will learn much from them also they can be watched over and over again. Well done. Thanks.
Thanks Orlando your feedback means a lot to me. Wishing you a great weekend. Cheers Andy
Excellent video clear explanation and the very best I have seen!!Thank you sir.
thank you very much Andy sure am happy with your technology
Superb sir very nice one of the best video in the youtube. To much detail explained i never know about to test diodes. Thanx a lot.
It's my best lesson ever.....Salute teacher
Thx for vital information to me
thank you, your video is what i am looking for
Bravo,great explanation, thank you very much.
Everything word near to perfection 💯
nice video sir..detail explanation..
Awesome explanation and understandable
Well presented & Informative thanks for sharing
thanks for ds greet video sir andy...frm philippines.
Impressive. Thumbs up for you
Super Great technical video.. thank you very much..❤
Well explained, I got all your points well
thank you sir this is one of the best videos
Excellent teach in, hopefully you will have saved me some money. Plus I have learned something 👍👍👍👍
BIG THANK YOU for this great explanation and presentation sir .very precise in every detail
very professionally done. congrats mate.
Thanks Kimo for your feedback, that's exactly how I used to do it in class and the students enjoyed & understood it pretty well too. Andy
Andy Mechanic Well the recipetiers for the Alternator are below the feild winding because when it’s rewinding the Alternator needs to go through the fresh hold when it’s regulated through voltage, when they regulate between the Engine it spins because they are meticulously harder to spin with lower Voltage power through pin13
Sir great narration with video such a class room like the person who don't know about alternator just spend 50 minutes is enough to understand about it
Very very thanks
We waiting for more video from electrical world
It's Clear and very good briefing I would like to say Thank you
thank you for precious information
Great video, thank you sir 👍
Great video very good to explain it thank you greetings from Mexico
🤗🤗🤗
Thanks a lot. The best video by far!
Cheers. Pleased you enjoyed it & thanks for the feedback. Andy
Thank you for the indepth video.
Excellent explanation sir,very useful
Greatest video ever made on CZcams thank you sir
wow! That's great to know. Thank You. Cheers Andy
Thank you very much good & well learned information in detail a layman can under stand easily keep posting
+D M Manju Thanks. Pleased you found it helpful. Cheers Andy
This video is the best one i've seen on how to test properly an alternator :) i've been having trouble with my cars alternator the first time took it apart it was very dirty inside,oil,dirt,copper and brush dust clean everything i did see the brush rings one worn out more then the other and the brushes do seem worn out enough or there is no tension in the springs that they don't make contact with the rings but after saying all that i put it back together at first it didn't want to charge but after a couple of minutes it started to charge properly but after about 10 days it failed took it apart again put it together and it charged ok but then after 2 days it failed again.
thank you sir.. you're explain so clearly❤❤❤
very detailed explanation! thanks for the help
+Ed Farmer Cheers Ed, good to know you found it helpful. Thanks for the feedback. Andy