Bad Fuses
Vložit
- čas přidán 3. 07. 2023
- This video looks at the quality - or lack thereof - of cheap, no-name automotive blade fuses.
ATC Blade Fuse Datasheets:
www.littelfuse.com/media?reso...
www.eaton.com/content/dam/eat...
HRA2Z companion website: a-2-z.tech/
HRA2Z Merch site: hamradioa2z.myspreadshop.com/ - Věda a technologie
Thanks for sharing this. This is taking slow-blow fuses to a new level... never-blow. I have a box of no-name fuses too and will be getting rid of them.
Why not just test them first, at least the lower amperage ones?
It's just... I too have such fuses and I know that they blew in my car at some point. 🤔
Sooo... My course of action would be to test the fuses that I can test with the equipment I have.
@@oilybrakes I can totally second that. I never got burned with cheap fuses. Some of them were a bit beyond their rating but i never got any that would never blow. Test 1-2 of each amperage and if they blow within spec, they're a keeper. Cheap isn't always bad and expensive isn't always good,
@@oilybrakes and only use the ones that blew when they should have ? Should I buy 5000 so I can take a sample large enough to get a good measure of tolerance and still have many left to use?
@@tricky778 Once you tested them, you will know that they are in spec. What else do you want?
@@oilybrakes once I know they're on spec they will not conduct. I want them to conduct.
Glad you did this test. I had always assumed off brand fuses woukd be at least close to thier rating. Thank you.
I go to a generally recognized national auto parts store for my fuses (I generally use Bussman). The price difference between the better fuses and the generic ones is pretty minimal compared to the value the better ones provide, in the larger picture. Nice video.
Yikes!
Talk about “penny wise, pound foolish.” It’s never occurred to me that I might be using no-blo fuses. Time to do some testing!
The ones to watch out for the most are cheap no name fuses made in China. Chinese manufacturers are known for not making things within spec.
This is not the first time I have seen this style of demonstration. I was amazed at the data that the demonstration produced. Essentially the same outcome as your test, but lacking your sophistication.
I was staying at a friends house several years ago, & I was given a spare room in their home to spend a night with them. This room was awaiting a contractor to tear out the ceiling & walls & install first grade insulation & such other work as he deemed necessary to make the room cozy in the coming winter.
My friend had purchased an electric heater (1500 watts) & it was plugged into a wall socket that was a dedicated 20 amp circuit. About an hour after retiring I awoke because of an odd smell. I sat up in bed & the electrical heater was engulfed in flames, & the power cord was burning along its length. One door in the room opened into the house proper, & the other opened into the back yard. I had left my jacket , trousers & outside boots beside the bed . I turned on the night table lamp, pulled my boots on & grabbed my coat & removed my leather gloves(work style, not "dressy" style), grabbed the handle of the heater (which was already starting to melt) , opened the outside door & heaved the heater into the yard, & then turned & pulled the power cord from the wall socket, & threw it into the yard. The rug was on fire, but it was a material that was very slow burning ( treated as "fire retardant"" & it joined the rest of the immolation in the yard. The next door neighbor saw the flames & ran into the back yard with a CO2 extinguisher & snuffed the burning bits out. My friend ran 9into the rook & did the same to the rug & we opened the two windows in the room to lose the smoke. Another neighbor had summoned the fire dept. & they & the police arrived together. The Captain declared the fire officially out (a second co2 bottle was used & they made certain the flooring beneath the rug & the wire & wood behind the melted outlet was
flame free. The fire Captain said that the Provincial Fire Marshall's office was attempting to have that particular heater banned from sale. The next day we bought a new 20 amp duplex receptacle, & I installed it . The lady of the house plugged a floor lamp into it, & turned the light on & all appeared well. I went to close the door on the entrance panel , & noticed that the dedicated breaker was open, but the light was still on ! I reset the breaker, & it was not latching. I removed the floor plate on the breaker board & removed the 20 amp breaker & took it apart, to find the contacts were welded shut !! My friend asked me what I thought. I told him that I thought that he should call a Provincially licensed contractor & have him
examine the panel installation, & anything else he deemed necessary, & to give you a report. The panel was made in China, & all its internals were as well. Most of the wiring had to be changed as well. My friend engaged his insurance company at this point, because his sister from whom he had purchased the house & who had paid a local electrical contractor to upgrade the house from a 60 amp circuit to a two hundred amp service, & it ALL had to be removed & approved equipment installed at great expense.
You never know these days.
I'm building a van and you just scared the crap out of me!!! I just order 2 big boxes of Littlefuse blades.
Thank you so much.
Thanks for the heads up on these fuses. I have a bunch of these fuses in a box and a few in service. I will now toss all of them.
Those fuses are nothing more than pretty plastic covered nails.
I suspect they're all the same, that's why spent the extra resources on the different colors
@@Eduardo_EspinozaThey certainly look it from the pics, all the wires look the same thickness
Those no-name fuses can come in handy since it would be difficult to get a penny in that blade fuse holder.
Discovered the same thing about 10-12 years ago when a cheap fuse from one of those kits failed to blow when a wire shorted to ground on a motorcycle. The end result was a small fire and many hours of labor replacing the bike's wiring harness. I contacted the seller and let them know what happened; they didn't believe me.
Testing the fuses found the same thing as in this video, they just didn't open under 2x-3x their rated load.
You've created some work for me with this video... Thank you.
Same haha...damn.
Thank you very, very much for this video. As a motorhome owner this is very worrying as I have been using those cheap fuses for years. I have been very lucky.
I am buying a set of decent ones straight away and replacing them all. Thanks again.
Fuse wire is made from a special metal alloy wire that will fuse(When any wire melts open, it is said to fuse) that is suspended between the mounting connections hence the added value.The giant bag of fuses for a dollar that I have inspected seem like the fuse wire in them is just part of the stamped out aluminium mounting blades hence no value. Great video N0̷PXJ
Hi, Tom. Thanks for the very informative and interesting video. Blade fuses are a type of commodity item I've never really thought twice about. I guess not all of them "just work". I'd hate to have one of those 5A no-name fuses "protecting" a sensitive circuit in my vehicle. Well done.
Marc (N1QGM)
Same here - I never thought you could screw up a fuse!
Pay attention. Any fuse like these, no matter what manufacturer, will NOT protect 'sensitive' equipment. They are only intended to protect wiring systems.
I remember a Marconi engineer looking at a duff transistor. "The three pronged fuse has blown!"
Thank you for doing this and sharing it. I have for years used any old fuse I could find (correct stated rating though). I will avoid noname fuses from here on out! Shocking results.
Thanks for the eye opening information. I've always used Littlefuse and Bussman fuses whenever possible, but now I'll stay with them all the time.
I ditched the cheap fuses not over the (unknown to me) failure to blow, but rather over their inconsistent thickness and inability to reliably make contact with sockets.
Many off brand fuses are some random pot metal that doesn't seem to fit correctly, and have all sorts of strange geometry on the legs that you push into the sockets, compared to the Bussman, LittleFuse, and other OEM fuses that all fit snugly and have well formed connection legs.
Great job!
Sometimes a return to basic component information is invaluable. I think another component that needs examination is clone Anderson Power Points. Many of them look right, but do not use the proper materials and arc at very low currents!
Hope you'll do more things like this....
I have heard about fake PowerPoles. That’s another one I need to check into. Thanks for mentioning it.
I bought a similar pack of bargain fuses, and had some suspicion, based on the thickness of the internal conductor, that their rating was off. You just verified what I suspected, in a rather dramatic and more accurate fashion. Thanks!
Great video! Excellent warning about cheap fuses that often get taken for granted. Please note though, that those types of heat guns observe a rather large conical region in front of them to determine the temp. They do NOT measure the point at the red laser dot. Unless one is measuring a larger area (like a frying pan for example), they are inaccurate for small spot measurements like the fuse - the fuse is likely to be much hotter than one it displays since it is averaging same of the desktop temp with the fuse. Nonetheless, awesome video. Will be sharing this with others!
Very interesting
I'm a mechanic and I didn't know that all fuses were not created equal
I will no longer be buying cheap fuses
Thank you
I bought some Blue Sea circuit breakers and tested them. There were many amps over the rating and several minutes to pop. They are very slow to go and their tolerance is very high.
Good info.
😮!!!
Im sure I have a box or two of chinesium fuses that I need to check.
These fuses are the best kind! All the other ones blow out so fast! This is the last fuse you will ever need to buy.
This is a great bit of advice, and a nice catch. I can only imagine how many of these no-name kits have been sold, and how many devices out there are virtually unprotected due to the use of imposter fuses! As another viewer commented, some of the dirt-cheap fuses are made with some rather dubious metals that rust/corrode, and that's a deal-breaker in and of itself!
I'm not in the radio field, my interests lean more towards automotive and computers, but I've always used Littelfuse or Bussmann - leaning more towards Bussmann as the fuse bodies are more translucent and easier to see gaps. I feel more comfortable with a brand I've used for years, over some brand I've never heard of that has so many vowels that I'm not exactly sure how to pronounce it. The price differential isn't significant enough for me to "go cheap." Sometimes you really do get what you pay for!
When I first saw the 5-Amp in your test rig on the bench, my initial thought was "that link is WAAYYY too thick to be a fiver..." At a glance, it looks like a 20-Amp or 25-Amp. I know what some of you are probably shouting at your screen right now: "you can't properly rate a fuse based on looks alone," and generally speaking, yes, you're absolutely right and I wholeheartedly agree. BUT this fuse was CLEARLY not a 5-Amp, heck, it's more like a fuse-shaped link! As you so handily demonstrated, it could easily withstand multiple long-run tests at 400% rated current. I've seen heat-warped fuse blocks once in a while, in cars that I've repaired over the years. I think you might have solved the mystery for how that happens - OEM fuses pop and some "El Cheapo" fuses the owner bought shoved in to replace them.
I watch a few HVACR channels, and most RTU (rooftop units) use a 5-Amp blade fuse to protect the control boards. I might drop a note with those Creators and suggest they buy Bussmann or Littelfuse exclusively. I assume they do, since they go through commercial warehouses, but they've got businesses to run and might consider trimming overhead by buying bulk no-names.
Nice video. And also a very important topic. These cheap "dummy-fuses" won#t save you a penny, if your car or even your house catches fire and burns to ashes. But, just for showing the seriousness of the danger (and for fun), you should have used thinner wire, that actually melts or lights up.
Anyway, amazing video, thank you. 73s
Thanks for a superb video and useful warning. I'm a glider pilot and use this type of fuse to protect the wiring that runs under my seat; I can't remember where I bought them. I must figure out how to control the current from a lead-acid battery so I can check one or two of mine!
Tom, this is great data. Will spread the word to the club.
I discovered this a while ago, After having to re wire the loom on a friends Quadbike, I tested the 45A at 60A and it melted the plastic but didn't blow. Lawson Fuses are the best.
I had some of these no name ones in our Peterbilt fuse panels until we found out some of them would actually catch the plastic on the fuse on fire and still not blow the fuse! Never again.
I have several of these boxes and DID get an expected clear on fuses below 5amps. I need to test them and also would have liked to see you text the bigger no names. Guess I need to price out name brand on fuses boxes and test my cheapies
The fuses that are hard to read, don't have the rating colored white, are the ones that are not "certified " as I understand. I found a video similar to yours stating this. I trashed my assortment from Harbor Freight, and purchased a Littelfuse assortment. Great video
I have oem ones that don't have that
Some major brand in the UK, Halfords, doesn't state that they match the DIN standard, not any set of qualities with reference to it. I've no idea whether they blow as fast as they should, nor as close to the rating as they should, and they didn't promise that they would either.
One thing you'll also find with the cheap generic no noame fuses is the blade material is thinner, therefore it doesn't have the same contact pressure and that allows resistance and heat build up. I've seen a few of thses melt in the past. I'd also check the temperature of the powerpole connectors as they are rubbish, I refuse to use them. Very disconcerting that the 5A fuse just doesn't blow at 20A though, so generally zero protection and 100% dangerous.
Could you please explain further what is bad about power pole connectors?
Well I’m about to order some new name brand fuses and throw out all the no brand stuff on my bench right now.
Thanks Tom!
just this week I had smoke come out from under the dashboard of my car , 2 wires dead shorted and went red hot , burnt all the outer covering to a crisp , they where supposed to be protected by a 10 amp fuse , all that the fuse did was melt a little bit , but did not blow. I think the cars battery is a 60 amp. I will be replacing all the cheap fuses with brand names asap. thanks for your video.
Thanks for taking the time to share this information! Before throwing them out, maybe test them on a car battery in various parallel configurations. Then maybe you can repurpose the 5A fuses to protect 00 wire...😛
I was randomly recommended this video and straight up bought spare bussman fuses (the littelfuse kits were about the same price) just now. Glad I never had to use the spares I bought a couple years ago, those will go straight to the trash. It seems like the knockoff kits spent all of their money on a case so maybe I'll put the good bussman fuses in that. Thanks!
Tanks Tom another really informative video. Look forward to more in the future.
Just shocking. Never thought the China fuses were that far off , it’s simply so dangerous that the companies that put them up for sale should be sued. Thanks for an interesting test.
I saw a doctor in china comparing medical thermometers. They were all showing different readings. China is simply too corrupt to produce quality products.
How ? are you going to sue Brandon
ESPECIALLY BRANDON!!!!
I have some no name fuses and no longer use them. One was melting, turning black, smoking, and almost caught fire after running at capacity for a long period of time.
Had always assumed a fuse was a fuse, and even though I have a couple kits of brand-name fuses, I also have probably that exact same kit of generic fuses. Throwing it out. Thanks!
Thanks Tom,really good info. Never gave it a thought till now will check my that hang on wall. Thanks again.
Extremely helpful video! I've got a package of Bussman fuses on order and am going to swap out all my current no-name blades as soon as it arrives. Never thought about fuses before and just assumed a fuse is a fuse is a fuse. Thank you so much for this informative video! 73!
This information is soo needed.
This was 101 in my day.
Trust but verify… especially when expensive equipment is involved.
Thank you for sharing your testing, something I had not been considering a potential issue. I will examine and replace all my fuses now as well.
Wow! You're right, thanks for testing these. I have a box of no name fuses also, I just tested several 5 amp fuses on a quality 20 amp power supply - they didn't blow, I even tested the ten amp fuses.
... some months ago i had my fuse box melt down while i was driving, and i had no idea how the heck it happened.
looks like i might have just found out.. ty so much, i am gonna go grab some bussmann resettables and pray they're authentic i think XD
I'm most impressed! Very important info. Now I got to go check my fuses. Don't forget to check what goes in your car, lots of sensitive stuff in there.
Excellent video, thanx for the warning. I did buy a non-branded kit "ABN". Tested the kit on my PSU and the fuses up to 20A cleared in a timely manner. Looks like the fuses you had were just bits of wire between the lugs... Thanks again.
Great knowledge. I` m going to check all my DC fuses in our RV.
Thank you for testing these fuses, and for making this video!
Thanks I'm changing my fuses today!
In the UK, I have found those "cheap and nasty" fuses have blades made of aluminum 0.5mm thick. The decent fuses have blades made of nickel plated brass, 0.7mm thick. So there is potential for the cheap fuses to give a bad contact. I once made sure I gave eveyone in my car club a "free fuse" and told them that if you can easily bend the blades like you can on your free gift, don't buy it...
yes, my experience Aluminum is soft and forms a high resistant connection over time. Dito throw away the non-branded fuses.
Brass is a pretty dismal conductor of heat, whereas aluminum is as good as it gets, excluding copper and silver. Since fuses are really just self-heating resistors that melt themselves to oblivion, removing heat "too fast" will delay or even prevent blowing.
@@raymiller5738
That's why aluminum has been largely banned for AC mains wiring - joints tended to be unreliable and cause fires. There are problems with both oxidation (aluminum oxide is an excellent insulator) and "cold flow."
I have a small single-AA cell, single mode flashlight I really like except for one problem - the tail cap of case was notorious for going high-resistance between the cap and body threads. A tiny bit of a zinc paste (Gardner Bender OX-100B), intended for use on aluminum wires, on the threads fixed the problem nicely.
Well shit, I just got a whole bunch of cheap Amazon fuses. I've got a scope and PSU, I'm gonna set up the same test you did and see if they are junk. Thanks for posting!
I pushed 4.2 amps through a 2 amp fuse for a couple mins. I'll need to build a way to do higher amp tests. But I'm gonna try to return this crap to Amazon.
Now I also have to rip my motorcycle apart to pull out the fuse I put in.
@@rjmackenzieDude, you need to go and read about fuses and their characteristics to understand why a 2amp fuse could easily pass 4 amps. The idea that a 2amp fuse ought to blow after 2amps is nonsense. A fuse can withstand many times its rating before it blows.
Wow! I'm not a radio guy but really appreciate YT for suggesting this video. I recently bought one of those cheap fuse kits on Amazon to keep in my RV. Not only will I toss that kit out but I'm going to have to go through all the fuses in my coach because I've a bad feeling that the manufacturer of my RV may have used these cheap fuses. I can only wonder how many camper fires might have been caused by one of these poorly made fuses. Thanks!!!
A very good demonstration and an eye-opener to modern day equipment. I have very little new equipment as I am a homebrewer and operate boat-anchor vacuum tube equipment. The fact that the voltage on the power supply drops to 0.6 volts and still maintains 20A is amazing to me. That is 12 watts of heat being dissipated in the fuse, as your temperature measurements indicated, which seems like it would melt the fuse link in a reasonably short time. Apparently not...
My power supplies are all the linear brute-force type and shorting one of them will likely not drop the voltage any significant amount so we would end up with the full 15 volts (as in your example) at 20A for 300 watts being dissipated in the fuse and we all know where that is going to go and hopefully the fuse will protect the equipment from catastrophic damage and possible fire.
With over-current sensing in SMPS in modern equipment, it almost seems redundant to put a fuse in the output side, although I think it is still a good idea. 73 WA4QGA
Ok, you've spooked me! I like littelfuse but have some cheapo genetics. Ordering replacements now. Thank you!
Did not realize this about fuses. Will be checking what kind of fuses I have. Thanks
I'd of never thought that no name fuses would be THAT bad! I think I have some and will check them and probably through them out. Thanks for making this video. I too am a Ham Radio guy.
About that fire extinguisher - you might want to get one with metal handles. I've heard stories about the plastic ones breaking during test. (Especially if you fail to properly remove the safety.) They're a little more expensive and a bit bigger, but still a good investment.
Thanks for the tip!
@@HamRadioA2Z Another tip: Get CO2 extinguishers for dealing with equipment fires. The other types will make a mess of things and potentially create a bigger problem as the electrical fire heats things up.
@@russellhltn1396 I usually reccommend Foam extinguishers. Sligthly less effective than powder, but doesn't destroy everything that the fire didn't damage.
@@HamRadioA2Z Have you ever seen the mess created by a dry powder fire extinguisher, especially in a relatively confined space?
What makes matters worse..the powder is hydroscopic, and will corrode metals if you don't vacuum every last trace.
Go dry water mist good on most fires and using reverse osmosis water it's none conductive and once dry leaves no residue
I was concerned about this exact issue, so I didn't get one from amazon. Thanks for confirming my concern.
Thank you for this video! I had cheap fuses laying around and tested them, this is what i found:
1. 3A fuses did not blow at 10 amps even after 3 minutes
2. My switching-mode power supply blew a couple of 2A fuses at
You have illustrated overcurrent protection in the precise way it is intended to work. The startling issue I had not expected is the lack of specification on the chinesium fuses. Very nicely done and an important warning.TNX
For 44 years, I taught aircraft electrical/avionics/weapons control systems maintenance. I do not remember one new student knowing the true purpose of fuses/circuit breakers. When we got done, they knew.
I had some of these fuses around and used them once for some relays, a fan they were controlling got jammed and it should have blown the fuse but instead melted all the plastic off of the fuse and got everything pretty hot. I bought a box of legitimate brand fuses and made sure that I never used the cheap ones again.
Thanks for sharing this. I always say that government has a function. One of those functions is to protect consumers.
When safety devices fail to do their job, the government should prohibit their sale as a risk to safety.
My only concern with your test is you showed only one test of a 5 amp fuse. I'd like to see the results of 5-5 amp, 5-10 amp, and 5 -15 amp fuses.
Certifications are important. But even without them any safety device should perform as expected or be prohibited from sale.
I did try several of the 5’s with similar results. Stay tuned for a follow up video.
Yeah, well, it seems the government is about as effective as these fuses, but we don't get a bargain price for them!
Thanks Tom. Great info
Thanks for the chart, one more data point, typically those chinese fuses are aluminum, and aluminum on standard tinned brass terminals is a corrosion and fire hazard when exposed to wet environments. I had a piece of outdoor equipment, 30a fuse for the glow plugs ended up burning up the whole fuse block. clipping one fuse leg will show if its tinned brass or aluminum. Buss fuses are a guarantee to be tinned brass
Thanks for the warning!
73's, Martin
Thanks from SA. Harry.
Thanks for the heads up!
Excellent and informative video! Time to double check my fuses!! Subscribed!!
Very revealing! Thank you! And to think some amateur airplane builders might use these cheap bad fuses as their circuit breakers!!
Thank you so much !!! You are seriously saving things and people with this.
Thanks for the information about fuses.
I had that cheap chinese fuse kit. After seeing your video 2 months ago i threw them all out and bought all Bussman. I did use the chinese plastic case.
I still have my cheap Chinese/noname fuses, but only for doing more tests or videos. Not using them in any of my active equipment.
Great video.. I was just mentioning to my brother a few days ago not to buy no-name fuses and to stick bussmann, etc. For individual fuses, I usually purchase them from digikey or mouser to be safe.
Afterwards Happy 4th of July, Tom. Good to see you back again.. 73 de Uncle Günter 💯👌🙋♂
Amazingly worrying - thanks for alerting everyone.
Great video. It is pretty scary that they are allowed to sell such a bad product that is supposed to provide safety. I am tossing all of my no name fuses out immediately.
It is pretty scary that they are allowed to sell such a bad product
Politicians sell their words to disciples and other eager listeners -
and the naive people buy it - keep voting for these marketers of
political BS - people keep voting for them and wave their miniature
flags at them --- How stupis is that ?
THe Politicians NEVER SAY or state in a sworn affidavit that they
promise to do what they say.
YES- The people are totally stupid
And all CORPORATIONS and various manufacturers know that.
Even the U.S. Government knows that the population cannot count
to ten without using their fingers
The US currency is the Metric system - and it is because the metric
system for the currency has been made compulsory.
The reason why people 'Domestically - in General use the modified Imperial
system is that it has not been made compulsory for common domestic use
[ Only one state in the US uses Metric for distance Measurement i.e. Km. and not Miles. ]
Interstate 19 from Nogales to Tucson in AZ is measured and noticed in Km.
The ONLY U.S. Highway to have Metric Road signs.
The USA committed to the metric system in 1875 by signing an international agreement.
'LA CONFÉRENCE DI MÉTRE' in Paris [FRANCE]
Signed by M. Ashbourne the U.S. Envoy to France
All its units have been defined to the metric standard since then
The Metric system is the official and preferred measuring system in the
USA for Trade and Commerce.
International trade would be difficult with different measurement
standards - which is why the Metric System is the international system
for weights and measures - >>> including the USA
Excellent advice based on your tests!
Outstanding video and demonstration. Thanks for sharing this. 73’s N2STX
Thanks for the enlightment!
Thanks for the tests. Just 2 comments, it could be sped up only, mentioned twice sloowly the ebay amazon (we got it the first time around! ;)). Second thing the mic scratching can be painful after a while. I hope it will help make your next viseo even better!
great video and a solid reminder to ALWAYS buy name brand fuses that specifically list the specs and have the UL seal of approval. Remember... you get what you pay for.
A certain company named after a major feature in South America is notorious for selling electrical devices of all sorts that don't carry any credible safety agency approval/certifications.
I think a lot of this stuff comes from companies that say "yes, we can make that" when what they really mean is "we can make something that looks like that."
I did once see a small wooden model that was claimed to be FCC certified. Now I am willing to admit that a chunk of wood is quite unlikely to generate EMI or RFI, but ...
Great subject, Thank you, I had suspected this, you proved it. Thanks from N8AGW
That was a great test! Very useful.
Nicely done!
I have my fuses from Ali or from al local store which is called "Schraube" it means screw. I will test them tomorrow. Very important video
I was reminded long long long ago that my auto instructor said you're paying for the metal they use for these fuses, & they were coming from a place of experience.
Just WOW. That’s great content. Good job.
If I remember correctly there was a huge bruhaha several years ago about these Chineseium fuses not working properly and were extremely dangerous.
Chineseium ... did you learn that in racist school? 😘
@@michaelseitz8938 I learned it over the years because Chinese manufactures often play fast and loose with specifications. SSRs that don't work at rated input control voltage, USB automotive power adapters that do not deliver rated current and become dangerously hot, multichip LED modules that are not well balanced and become intermittent due to bond wire problems. Just to name a few off the top of my head.
Totally agree. Unfortunately it's really hard in the UK to find any parts like this that aren't cheap C...ese crap. Britain used to make all these kinds of things, but all those companies have long since closed down. I searched for ages and still couldn't find any quality fuses.
even 'top brand' stuff is often made in china, so much is, but made to the brands specifications by some third party manufacturer
I've got cheap no name standard fuses for our lighting in the house. I'm always experimenting so I have had quite a few blown fuses (luckily lol)
The ones I got blow just fine very close to the same as name brand ones, but yeah I would not be surprised that going with any no name fuse is a big gamble.
I remember a 528e back when German cars use ceramic/thermosetting strip fuses . Red 16 white 8blue25. It was burned out in the roof from a dome light short. The fuse was replaced from white to blue.
Wow, so dangerous thanks for the video glad I only have standard height mini fuses that are no name. And my low profile ones are Bussman. Will be getting new fuses for digging into my families vehicles for the nonpainted no brand fuses
Thank you for your excellent review. I also purchase a box of 300 no name blade fuses from EBay for $16 and had quite a different experience. I replace the original 30 Amp fuse with one from 30 Amp fuse from EBay that is in line with a solar regulator. The solar regulator runs a maximum of 25 amps and the plastic that encapsulated the blade fuse wire melted exposing the fuse wire. It seems that they made of a plastic with a very low melting point. I wonder if the current did get to 30 Amps or above 30 Amps that it would catch on fire.
Thank you very much, I have same that unbranded fuse and I tested them my self... man they are unblown able ☠️☠️
There was a massive recall of these fuses a few years ago, because the only difference between the fuses was the colour of the body, as they all used the same stamped out fuse element, and simply put a different colour body on the top. Millions of boxes recalled, they had to go somewhere, so likely got sold off as lots cheap. Basically look at the elements, if they are all the same size they are all 30A fuses.
Wow, thanks for sharing this information and I am glad to have seen this video. I'll share this with my friends.
I got a bag of fifty 3A ATC fuses. I'm good to go for all my needs. I've been testing DC disconnect breakers. A 10A won't even trip at 22A.
I have considered doing a video about breakers. Even good quality circuit breakers take longer to trip than a fuse because of the nature of how they operate. As I said at the beginning of the video, fuses and circuit breakers are primarily designed to protect wiring from catching fire. They’re not really designed to protect our electronic equipment from internal faults.
@@HamRadioA2Z You might also want to look at DC breakers. Some of the polarized ones actually interrupt the arc faster when connected in reverse. I get all this stuff free from manufacturers. Sure glad I'm not having top for some of these products. It is the wild west on these CE listed products!