Ho cambiato il motorino e mi ha funzionato, ma ultimamente mi capita che non sente quando esco la chiave dal quadro. L’errore non inserisce il bloccasterzo e non mi permette il riavvio del Morore quando reinserisco la chiave. Insistendo parecchie volte uscendo ed inserendo la chiave tutto rifunziona. Ma da cosa dipende? Forse si deve fare la riprogrammazione della chiave?
Do you have a phone number would like to see if I could send you mine in. Replaced the motor in my esl but still won't start I am guessing it is the nec chip
hi Every one it happen to me and i have try to get some quotes but every one is like taking advantage and asking 300 to 650 pounds but i decided to do it my self and ordered the motor and i will make a video and its so easy only 4 screws and then remove your ESL is steering is not locked but even if its locked just tap with a some thing on the ESL where motor is located on the ESL while Connected with the cable and it will work then there are videos how to open esl and dont need laptop or any thing to connect just replace the motor and put it back together and just connect the cable and try the key in the ignition and hala you will be surprised that how easy it is and these people on ebay and the garages asking so much money for this small job. i will make a video and i will upload, hope this will help if any one need help then just message me i will be more then happy to help.
Oh my gosh, I just did that - tapped a locked and unresponsive ESL with a hammer and hey presto, it unlocked! I can now do the simple job or replacing the motor.....Thanks Kamran!
Shemek Best this has happened to my car. Is the a diagnostic toll that I can get to ensure it is definitely an ESL issue? Secondly if I DIY this, where do you get the computer software to reprogram the new ESL with the key? Dani.lewis314@gmail.com
Hi, thank you for the video, can you please tell me were you can buy the motor as after taping mine, it has started working again, but i think the motor is weak, so want to replace it before it stops working altogether. many thanks
Gareth Rendle hey, I used to get it from Simon Touch, here is the link: www.keyprogtools.com/mercedes-nec-device-esl-w204-steering-lock/mercedes-mb-nec-esl-motor But it was few months ago and I had quite a lot at the time from this guy. Thanks, S
This is What Im about to deal with now.. Car will Not Start Mercedes Dealer says if its Locked they will have to get new steering column. Then I watch this guy fix ESL.. Wow Where is your shop can i come to you.. ?
I just paid $1000 to replace the whole piece. Mercedes should hire you to test and fix this unit instead of making their clients pay such amounts for a 10 min. job. Such a stupid company will never buy from them again.
To be honest no car manufacturer does any repairs that involve replacing components , they always replace the whole module or part , they basically don’t refurbish anything so it’s not a problem with just Mercedes
this is why the newer Mercedes are crap. German engineers placed so much technical shit that would easily render their car useless and become money pit!!!
Yep! 19 years with my Toyota almost 300k miles, never failed to start... Almost all parts are original, only normal wear items changed when needed, belts, hoses, radiator, struts, ect, nothing expensive, most I can do myself in my driveway ... Still drives quiet and smooth!
This is the best ESL Tool in the market good job
Great video, really good work
Exelent video my friend !
Thanks guys...
Hi, what with last step with esl personalization after write factory with simon.? You make it with avdi? Best rgs.
Great job!!!
I can't get the screws/pins out of the case. What would happen if I drill them out? Can I put screws in afterward? Awesome info., thanks!
Nice Shemek!!
What is the fluid you use to clean the chip?
Amigo un saludo desde CHILE
¿ tienes el link para comprar el emulador para un mercedez Benz c 180 kompressor 2009....?
Por favor
It's a really good video for people like me as I've never done 1 and I'm learning here a lot thanks for sharing your knowledge.
Nice work mate, great video!
good job
good video
Great video! How did you re-seal the box after someone opened it poorly? I drilled 2/4 of mine out…
Good Job (Y)
had e250 cgi esl go but it was not locked still no start cost me 480 to put a brand new one in and the green key
Ho cambiato il motorino e mi ha funzionato, ma ultimamente mi capita che non sente quando esco la chiave dal quadro. L’errore non inserisce il bloccasterzo e non mi permette il riavvio del Morore quando reinserisco la chiave. Insistendo parecchie volte uscendo ed inserendo la chiave tutto rifunziona. Ma da cosa dipende? Forse si deve fare la riprogrammazione della chiave?
Do YOU or WILL you fix mine. Mailed ESL and Ignition switch ???
I wish this video was up before I had spent 1000€ replacing it...
como comprar um motor steering lock
Where exactly are you filming this ?
Good video for thouse whi have the tools to do it
good
Do you have a phone number would like to see if I could send you mine in. Replaced the motor in my esl but still won't start I am guessing it is the nec chip
Hi if I send you my nec would you be able to repair it if so how much ?
hi Every one it happen to me and i have try to get some quotes but every one is like taking advantage and asking 300 to 650 pounds but i decided to do it my self and ordered the motor and i will make a video and its so easy only 4 screws and then remove your ESL is steering is not locked but even if its locked just tap with a some thing on the ESL where motor is located on the ESL while Connected with the cable and it will work then there are videos how to open esl and dont need laptop or any thing to connect just replace the motor and put it back together and just connect the cable and try the key in the ignition and hala you will be surprised that how easy it is and these people on ebay and the garages asking so much money for this small job. i will make a video and i will upload, hope this will help if any one need help then just message me i will be more then happy to help.
I got to say that you have been quite lucky....and well done mate!
Oh my gosh, I just did that - tapped a locked and unresponsive ESL with a hammer and hey presto, it unlocked! I can now do the simple job or replacing the motor.....Thanks Kamran!
this has just happened to my w204 c220 can someone give me advice on sorting the problem without being took took to the cleaners
In what position did your steering lock end up?locked or open...
fully turned and locked
Graeme Parkinson hey,
Contact me on bestdiagcar@gmail.com
Shemek Best hey how can I get your phone number I need help with my c300
Shemek Best this has happened to my car. Is the a diagnostic toll that I can get to ensure it is definitely an ESL issue? Secondly if I DIY this, where do you get the computer software to reprogram the new ESL with the key? Dani.lewis314@gmail.com
iyi iş
Where you from?
ingeniero usted vende ese curzo
Hi, thank you for the video, can you please tell me were you can buy the motor as after taping mine, it has started working again, but i think the motor is weak, so want to replace it before it stops working altogether. many thanks
Gareth Rendle hey,
I used to get it from Simon Touch, here is the link: www.keyprogtools.com/mercedes-nec-device-esl-w204-steering-lock/mercedes-mb-nec-esl-motor
But it was few months ago and I had quite a lot at the time from this guy.
Thanks,
S
SAKIN ALMAYIN ARKADASLAR
This is What Im about to deal with now.. Car will Not Start Mercedes Dealer says if its Locked they will have to get new steering column. Then I watch this guy fix ESL.. Wow Where is your shop can i come to you.. ?
I just have the same problem with w246 and it s not the same nek
NEC sorry
do you repair them for customers?
I used to but not anymore...
@@ShemekBest how come?
boudia galera
I just paid $1000 to replace the whole piece. Mercedes should hire you to test and fix this unit instead of making their clients pay such amounts for a 10 min. job. Such a stupid company will never buy from them again.
To be honest no car manufacturer does any repairs that involve replacing components , they always replace the whole module or part , they basically don’t refurbish anything so it’s not a problem with just Mercedes
this is why the newer Mercedes are crap. German engineers placed so much technical shit that would easily render their car useless and become money pit!!!
Yep! 19 years with my Toyota almost 300k miles, never failed to start... Almost all parts are original, only normal wear items changed when needed, belts, hoses, radiator, struts, ect, nothing expensive, most I can do myself in my driveway ... Still drives quiet and smooth!