Let's Build a Model Steam Engine : Oiling System!
Vložit
- čas přidán 29. 01. 2021
- This episode on Blondihacks, I'm building a lubrication system for my model steam engine! Exclusive videos, drawings, models & plans available on Patreon!
/ quinndunki
Buy Blondihacks stuff in my store! www.blondihacks.com/store
Buy the Bearing and Steam Cylinder oils from Michael at highiron@aol.com. He serves the US model engineering community.
Pin Vise - amzn.to/3nUlGfW
Jeweler’s fixture plate : amzn.to/3nVDirX
Here are links for many of the tools that you see me using:
(I earn small commissions on these links)
• Mill clamping set : amzn.to/2xc9vqr
• Thread checker : amzn.to/2xgO2gc
• Chamfering Tool : amzn.to/2IJsAUs
• Zero Flute Chamfering Tool : amzn.to/3bmPLPe
• NOGA Deburring set : amzn.to/2Jv3RlW
• NOGA Reversible Deburring Tool : amzn.to/2X07WX1
• Knurling Tool : amzn.to/2FblXb1
• Tapered Reamer : amzn.to/2Gn0b3G
• Chucking Reamer set : amzn.to/3odnVvh
• Nicholson files : amzn.to/2VcHkls
• Nicholson needle files : amzn.to/2BDt7ph
• 1-2-3 Blocks : amzn.to/2EvAsGq
• Dormer center drills : amzn.to/2X7U6ij
• 6” Divider : amzn.to/2GTncM3
• NOGA arm with magnetic base : amzn.to/2U2bGTI
• NOGA arm Big Boy : amzn.to/381acji
• Collet Block set : amzn.to/2UkF1vZ
• DeWalt drill and driver kit : amzn.to/2Gp6IeJ
• DeWalt portable band saw : amzn.to/2U4Mhsw
• DeWalt band saw blades : amzn.to/2H2J4X0
• High Speed Steel parting blade : amzn.to/2YcdYBv
• High Speed Steel blade holder : amzn.to/2JgO0IK
• High Speed Steel tool blanks : amzn.to/2H1qoqr
• Grizzly Pre-ground tool bits : amzn.to/2H4yr5z
• AXA tool holders : amzn.to/2V1gOHl
• Quick Change Toolpost : amzn.to/310mshq
• Norton oil stone kit : amzn.to/2EbLEH3
• Norton small sharpening stone: amzn.to/2PQwex9
• End mills : amzn.to/2U76Vsf
• Milling machine starter pack : amzn.to/2tA2M4e
• Forceps : amzn.to/2Ww5dFT
• Mill Parallels : amzn.to/2lfW82i
• GearWrench ratcheting tap & die set : amzn.to/2lMwZfV
• Step bits : amzn.to/2q54yfJ
• Starrett automatic center punch : amzn.to/2DCI7C9
• Budget transfer punch set : amzn.to/2yfDgHi
• Precision shim stock : amzn.to/34lJlME
• Jet 2-ton press : amzn.to/2SLas1s
• Gear Wrench locking puller : amzn.to/2ubBV1W
• Starrett tap wrenches : amzn.to/35jxM9e
• Goldenrod oiler : amzn.to/2TTS0En
• Acid brushes : amzn.to/36qWCo5
• Cratex (Bright Boy) block : amzn.to/38fNm72
• Scotchbrite deburring wheel : amzn.to/3ks0P2V
• Fein Turbo I shop vac : amzn.to/2vXpech
• Loc-Line (1/2”) : amzn.to/2U7JznB
• Loc-Line Pliers : amzn.to/2vWlXKf
• Machinist’s scale : amzn.to/2Zk6oVj
• Mixed metric/imperial dial caliper : amzn.to/2KKARYY
• Mitutoyo dial caliper : amzn.to/2IMIxJE
• Mitutoyo micrometer set : amzn.to/2GtICPx
• Mitutoyo depth micrometer : amzn.to/33M8aSH
• Mitutoyo edge finder : amzn.to/2G36omq
• Mitutoyo dial indicator : amzn.to/2H09gBr
• Mitutoyo dial test indicator : amzn.to/2E5lRQw
• Coaxial indicator : amzn.to/3bbBEwE
• Mitutoyo telescoping gauge set : amzn.to/2Z6houn
• Fowler dial bore gauge : amzn.to/2KQJNf2
• Fowler inside micrometer : amzn.to/2TVm7Jo
• Starrett 98-6 Level : amzn.to/38K7lMD
• Grizzly Height Gage : amzn.to/2PDTr7i
• Thread Checker : amzn.to/2CpvAUU
• The Amateur’s Lathe book : amzn.to/3jIYlwe
• Anchor Lube : amzn.to/2H9X6oQ
• Boeshield T-9 : amzn.to/2TCE0wB
• Brownell’s Oxpho Blue : amzn.to/2YhZTmR
• JAX Metal Blackener : amzn.to/2MVe8wj
• Dykem layout fluid : amzn.to/2U7KQts
• Dykem dauber : amzn.to/2uoXtbm
• Tap Magic cutting oil : amzn.to/37uYzRS
• WD-40 : amzn.to/2GYV8rY
• Super 77 Spray Glue : amzn.to/2YScxZl
• Loctite 603 : amzn.to/2EYsPbi
• Loctite 242 : amzn.to/2RIt3sQ
• Way oil : amzn.to/38Gl9qW
• High pressure grease : amzn.to/2GloHTd
• CMD Extreme Pressure lube : amzn.to/36JPNy9
• Dry graphite lube : amzn.to/2U0YEZH
• 3-in-1 oil : amzn.to/36in43e
• Kroil : amzn.to/2uCf1RL
• Evaporust : amzn.to/36NSkII
• Brasso : amzn.to/3buE6yL
Commenting policy : blondihacks.com/commenting-po...
Want more content like this? Try these places:
Blondihacks on Instagram : / blondihacks
Blondihacks on Twitter : / quinndunki
Blondihacks on Patreon : / quinndunki
As an Amazon Associate, I earn from qualifying purchases.
Ambient Piano #3 by Benjamin Mastripolito. Used with permission under CC license. benpm.github.io - Věda a technologie
Warhammer? Trains? Machine Shop?
You have excellent taste in hobbies!
Yaaarrr
I didn't realize you knew my uncle Lenny! He's better now, luckily.
"Is that brass in a live steam environment?" Ha! I can just imagine this little engine popping up on Keith Appleton's channel in 20 years time. "It's a really well engineered little engine but the original builder used a brass union to attach the displacement lubricator. This is no good. I'm going to remake a new one out of phosphor bronze."
Where is Wal these days!
I definitely read that in Keith's voice, lol.
“Everyone calm down and enjoy the hobby” wise words.. interesting to know about the oils.. 🤙🏼
The island of misfit parts. Somewhere there is a good little boy or girl whose steam engine could use these parts, you know, the ones with oval cylinders and square flywheels :-(
I was just reading the “Commenting Policy” listed in the description. I’ve never noticed it before, and don’t know how long it’s been on your videos, but it should be required reading for all! Your channel has always been top notch, and I’ve learned an incredible amount of things from my frequent journeys into Blondieland! Thanks for your product! We love it!!
Thanks for the info on commenting policy. That’s good stuff. 👍
Well spotted, I hadn't seen it either. Loved the xkcd cartoon. It had me rolling with laughter 😀
Hear hear!
I just want to know when the super awesome firefly-theamed Barbecue is now.......
Finally I know why Uncle Lenny was never invited to parties...
As an old lube oil refining guy I enjoyed your description of steam cylinder oil.... good job...gold star
I’ve been curios for years how the lubricayion really works why it does not wash away or burn. Finally you were able to swiftly answer all that in 2 minutes most.
Re: over-oiling - I ran into a similar problem on a hot air engine I built. In a model engineering forum, I learned you can use a sewing needle with cotton thread to run through the hole. It acts as a wick. Need less? - Thread 2. I left mine proud on the side to the part and coiled up a bit in the cup. I like elegant solutions like this.
My lathe headstock bearings have wicks like this as well, for the same general reason: to slow down lubricant drainage into the bearings. It works pretty well.
Bonjour Quinn, I can't wait to see your Steam test, your work deserves it, amicalement Raphaël
"Days of model railroading". I'd like to know more.
I am also interested in hearing more about this as model railroading is what brought me down this rabbit hole.
Yes, count me in also.
Hello....I am the third commenter to wonder what model railroading 🚂you were into?! 🤔
You have to tell us what gauge/scale?
Now I even want her to try something like a sweet Pea locomotive. Would love to see that
I try my best to be carful with my Comments, but I’m feeling frisky today, so here goes! You are beautiful, wonderful, and gorgeous!! Every time I hear you talk about race cars, I need to go take some alone time! Saturday afternoon is my favorite part of the week! You rock.
Me: Say the line! Say the line!"
Quinn: "Yahtzee."
Me: "Ohhhhhhhhhhhhh! She said it!"
My nerd is strong too, this evening I was gushing over the delivery of a 117 piece drill set, and showing my grandson the tiny Number 50's, explaining that you would use them in pin vices which I happen to have. He was unimpressed, but I am dreaming of a project that needs the tools I have. Like your use, I suspect it will be to cleanup something that was not quit right at some stage.
Beautiful engine, thanks for the info on the operation of the engines too. I had never heard anyone talk about the use of lubricants in the steam. your on the path MrPete follows on details, and that is a very good trait.
As for the proof is in the cut, lord did I get nervous the first time I installed a revolver barrel. You have to make that front sight stand in the right position, and taking enough off for a full 360 degrees more starts to cause problems for the ejector latch. But, I got it. Machining is so rewarding on that level,and that is of course why we are making it here, really, so we can making it anywhere.
Tip for smaller hole in lubricator....Solder the hole and re-drill with a smaller drill.
See other posts in the thread (!!!!) for a tip on controlling the oil flow with cotton
Wonderful. Can't wait for LIVE STEAM TRIALS! Wooohooo hoooo hoooo hoooo!
14:14....NEVER lose the Yahtzee! That's locked in on this channel. We count on the Yahtzee, Quinn!
I'm sorry, I've caught myself saying "aaaaaaaaaaaaaaand yahtzee" on Keith's and Joe's CZcams posts
To the point. No excessive content. No missing content. And you are a joy to watch work! (9.87)
That's just artwork. In the age of Tesla and Dodge Hellcats..... Just watching this basic old school technology is mesmerizing. As simple as these old machines were they're still complicated.
As I see your project coming to completion I can't wait to see how long it takes to cast and machine railroad tracks from coast to coast.
I know it's going to be a fun episode. 😁
Quinn, this is the best of your series, with great humor (fatty uncle) and a wonderful job making complicated chemistry understandable. Your steam engine is so beautiful; I hope you're significantly understating its lifelong runtime potential, since 10 hours isn't nearly enough return for the love and patience invested.
That one got me too. Love her sense of humor.
Pleasantly surprised to see the oil from Little Engines. I live in Lomita and I'm a member of the RR museum that was the original home of Little Engines. Love the steam engine series!
A little piece of wire in the crosshead cups easily solves the flow problem.
Or a touch of silver solder on the bottom and a micro drill.
On miniature steam locos, small bits of yarn are put at the top of the feed pipe to ensure a steady, continuous flow. The amount of yarn in the pipe can be changed to alter oil feed rate.
I have no intention of ever building anything like Blondie has done but that's a really neet fix for a situation like this. I know these things don't need a strong flow of oil like an automotive engine needs, they just need to not run dry.
Your suggestion is perfect for a machine like this because it's so easily tuned to get the correct flow. 👍
Thanks Quinn. I love that you show your mistakes and how you rectify them - I can so relate to that in my own work and evolving skills. As has been said many times, if you don't make mistakes, you're not learning.
Hello Quinn at Blondiehacks! It's been a great series. Thank you. There was someone else doing a similar kit, but one step ahead, but I've stuck with your build series. It's been very, very interesting and as a steam engine/railway nut, it's been a joy to follow. Cheers! One suggestion on the guide-way oilers...maybe a little lint or felt or something less fiberous but oil-absorbent as a 'stopping' to slow the feed down a bit, before putting in narrower holes. If the oil be plentiful, rock on though.
I ain't a rich guy but I'll try putting some love in the coffee can if I can this month but, big thumbs up on here anyway.
A big hello for Sprocket kitteh! !:^)
Thanks Quinn!
That little jeweler's plate was awesome! Brand new stuff for me.
I love to watch you work. Most people think making small parts should take less time, but in reality, it sometimes takes a lot longer. I would like to make a suggestion. When making a thread with an undercut, always do the undercut before threading. That makes the last round of thread burr free. Just my rule of thumb. Try it.
You are throwing alot of knowledge that I never knew. I'm a novice mechanical engineer who has designed some parts but never actually manufactured parts since I just do outsourced work and I watch your channel to get some actual real life insights from a skilled machinist on how the manufacturing is actually done. I love all the actual deep physics and chemistry knowledge that you give out. Please continue in the same manner forever. Are you an engineer too?
“Not to be confused with your uncle Lenny”....
I think Quinn and ToT have hired the same writing staff :)
Now I remember the Chemistry Class I missed. Quinn reminded me of that chapter. Surfactants? Radicals? In a machine shop? lol
Found your channel through your collaboration with Rex, and I love it. I don't understand at least 80% of what you're doing, but I enjoy watching it, and every video is a new vocabulary lesson for me. My dad was a heavy duty mechanic since before WWII and he would have absolutely adored the work you're doing.
On our historic steam locos we use emulsifying oil from UK. (Not in the cylinders though). It makes the job as an engineer so much easyer. After an hour the oil and water has separated and we drain it with our oilgun or through the drain plugs. Top tip if You're running on steam.
You know my uncle lenny too??
All coming together...wanna see a video of that puppy running on steam...
I binge watched the entire series! Such a great build...small oopsies here and there, but that's what makes it so awesome...but you made it look so easy!
"You can measure all you want but the proof is in the cut". Now is that the saying of a machinist or a carpenter? 😉
I heard the Butcher make a similar utterance.
@@howardosborne8647 Brain surgeons: Hold my brisket.
Well, always learn something new from this channel. Didn't know there was special oil for "steam cylinder " who knew. Thanks
Quinn, many years ago during my apprenticeship, I used to work with a colleague who was a very keen model engineer. He would sometimes make a few parts at work when things were a bit quite. When making the lubrication units he designed them to accept the small brass main jets from Mikuni carburettors. These jets are inexpensive and are available in numerous (and accurate) bore diameters. This enabled the operator to interchange them to give the required oil flow rates. Some experimentation was required to hit the correct oil flow rate but the jets come in a vast array of diameters so you will eventually find the right ‘jet’ combination. Finally, lockdown hair is looking really good but please be careful when you are near any rotating machines - better safe than sorry.
What I love about your videos is you make mistakes.. everyone makes mistakes but most people wouldn’t show them and pretend to be perfect which give new starters an unrealistic goal of perfect machining! Well done👍🏻
If you had a small radius on the left side of your form tool, it would leave a small fillet in the corner of the bar stock and possibly prevent the part from snapping off when the diameter gets small (avoids a stress raiser) and the cutting force goes up when under full contact with the form tool. Great vids!!!
Wow, hope you are proud of yourself. You make it look so easy that both of my spare brain cells are saying "go on buy a mill and a lathe, you can do that". Seriously these videos are ace. You and TOT have helped keep me sane(ish) over lockdown.
We have a lot of the same interests, model trains, machining & electronics. I like doing electronic projects, especially CB & Ham radio projects.
Being of Irish descent, I know all to well about fatty alcoholics lol. Thank you for the lesson on form tools and what steam engine oil is and how it works. I loved the Yahtzee moment, but a small tear welled up when you didn't say "as is tradition" when facing off the brass.
I didn't know that brass could have problem with steam in the long run. That's good to know and it was also some interesting information about steam oil.
The lubricator is usually mounted slightly higher. Propper oilers would be drip oilers, the ones with the glass tubes for the oil and knobs for adjustment and the flip-up lever to open it. They would be too small to be practical in this size.
Regular steam cylinder oil is good to about 190 psi or superheating the steam to get all of the moisture out of it. Power plant turbines operate somewhere around 1200 psi and 1000 degrees F of superheat. The turbines exhaust into a condenser between 24 to 26 inches(or slightly more) of vacuum.
The displacement oiler is so clever thanks for explaining that :D
Imagine my excitement to find another video about the steam engine. I thought you were done and now I got to see more work to make it more complete. Great video.
look at you! all grown up and using three syllables words and French! Love the video and the oil explanation. Always interesting to learn the dark arts.
Quinn: thanks for covering the lubrication issues so well.
That engine is beautiful!
Nice series.
Thank you for sharing the project.
Loved how you handled a challenging setup and your approach to fixturing a solution.
Thanks for showing too when things didn't go as planned and holding your cool to keep marching on.
Learned more than technique but also patience and we all need more of patience.
Young lady ,you are an inspiration, a lovely way of explaining your process, nice to see your mistakes are not hidden , we all get it wrong ,we learn from it and move onto our next mistake . I hope you continue for years to come , you enjoy yourself and we enjoy watching you .
Fantastic work Quinn !! Love the miniature work you do. And all of the other projects you do.
Great Job.I build 7 1/2 gauge steam Locomotives.I found if your oilier is to generous with the oil ,I solder the base closed and re drill a smaller hole.Saves re making the oilier.
Really enjoyed the silver soldering portion...excellent set-up with he jewelers block...never seen that before⭐️⭐️⭐️⭐️⭐️
It works so nicely! But, are we nearing the end of the steam engine series? Oh noes!
Put a little cotton in cups to regulate oil flow.
Love the ceramic fixture plate, I always learn something ( many things) from BH. Nice work.
Quinn shows the bumps and warts as well, gotta like that
Such a cool project. A lot of time and effort went into to this. Definitely a conversation piece for sure. Love it!
Thanks for all your videos, Quinn! I.ve been binge watching whenever the covid fevers aren't too bad. It really helps me keep my sanity.
You could use an air compressor tool oiler trip lunch the steam cylinder while running on air. Just an idea I had. Looks great!
THANK YOU...for sharing. One fantastic looking and running steam-engine, Mr. PM Research will be proud of you, great work.
Another problem with oil in the steam, if you intend to use a condenser, is that the oil will return through the system with the steam and get stuck on the heat transfer surfaces in the boiler and condenser. This will cause hot spots on the heat transfer surfaces which will result in failure of the surfaces. Cylinder oil prevents this as it can be skimmed off the condensate in the hot well.
Maybe instead of a smaller drain hole on the slide lubricators, a bit of felt in them would slow the flow.
Steam turbine generator next?
Your videos are *VERY* enjoyable. I'm amazed at the wealth of knowledge you pack into each video. The videos you produce are valuable to the a wide range of machinist - from hobbyists to highly skilled.
Thank You !!!
You do amazing detail work! I love to watch you work. Thanks for sharing your knowledge and skills with us. Please post more content
"Figured out a way to flip them over" didnt you recently build a collett chuck
Thanks for sharing the tip on that fixture plate, unfortunately I was a little late and all the other subs bought them before I could get my hands on one. Great video as always!!
Those little components do look very rewarding to make, very satisfying to watch you make too 🙂
Fantastic! I learn so much watching your show. You are an excellent teacher/explainer of so many things. Thanks for sharing what you know. Been thinking about a metal lathe for a few years now. It should arrive soon. Woo hoo.
Beautifully done! Loved it!
Perhaps a point of interest: PB&J 460 can be used as a steam cylinder oil as well as a bearing oil. It is heavy enough to do a fair job of lubricating the cylinder - at least up to mild superheat - while having the added benefit of being non- compounded and hence removable from the exhaust condensate. This second feature is particularly helpful to steamboaters who recycle exhaust condensate through a “hotwell” filtering tank for reuse in their boilers.
"Soap is one of the most *basic* surfactants."
I see what you did there. ;)
The acid test is how well does it lubricate?
I think that's the first time I've ever seen a heart face emoji used in a machinist's video and I love it! 😍😍😍
Lovely! That ceramic fixture block looks super handy. Thanks for showing it.
Looked good to you, me and the person who bought the last one ahead of us!
i love that soldering plate setup.
Really nice project Quinn
very nice, i am glad to see it running
G'day Quinn terrific job it's helped me out with building mine cheers John
Looks great Awesome to see it all come together
Oh this is amazing! Haha- the smell of live steam and oil is iconic!
I just loved the explanation on your pin vice. The one I have looks about the same and I had it for the exact same reason, model railroad ! Have a large set of numbers bits that go down, so so small. A Princess Auto find of 20 years ago.
If you need to adjust the oil flow from the oiler cups, insert small wires, usually called joggle wires.
Use wire from multi strand wire or fuze wire and make them “L’ shaped with the long leg just shorter than the feed hole to the journal.
Nice project, stay safe.
Great tip!
And here i am, thinking, what kind of crazy setup would be used to make hex surface after turning
The answer is “cheat”. 😁 If I needed to make the hex, I’d use a hex collet block.
The form tool approach is great. I woul not even think of that, as I'd assume lots of chatter with the relatively large contact surface.Butit obviously worked pretty well, basicly even without the support. Nice!
Really enjoying this series! Thanks. Would love to hear/see more about your model RR activities.
I have a cut on the back of my right index finger that looks very much like yours. Mine came from reaching under a sharp end mill in the spindle. :)
Drill in the tailstock for me. 🤣
I just love the knowledge ,you are one very talented person thank you 👍👨🏻🏭🇬🇧
This is where an optical comparator would come in handy. If you don't have a comparator you can use an overhead projector.
Thanks Quinn, I needed oilers for a different engine, but these will work!
Bravo! Great vid! I'm going to have to get one of the soldering fixtures - thanks for sharing 👍
Great video... on a ship with steam power, lube oil quality management is a daily full time job... 36hrs a day! Have a great one!
Beautiful tiny parts.
Uncle Lenny says (burp) "Hello".
Thanks, and Meow to Sprocket.
Teeny tiny brass parts... my favorite. Another informative episode. Thanks!
Thanks Bernie! ❤️
Nice work and well-presented video. The cups are cool.
Warhammer miniatures and model railroading? Truly a woman of refined tastes.
Your engine sounds quite good! Congrats!
That part was really slick er I mean oily. Great build, congrats.
Ermahgerd Quinn ..brass in a live steam environment ..surely, we're all going to die! :O
This was a very satisfying video!
I probably would have had to make dozens of those cups because things that tiny have a habit of falling into black holes in my shop to never be seen again.
Great video Quinn.