Could you please explain the following to your Chinese supplier, Ping-Pong Fred. We recently bought one of your knapsack sprayers, which did not last long before the pump operating pipe broke, right next to where the pump rod is joined, weakened by welding. Using thin-walled piping is incorrect engineering. 1) We changed the pipe to thick-walled 16mm O/D pipe. Though there are 4 plastic sockets to support the pipe underneath the tank, only 2 are used, incorrectly. 2) We used a longer pipe to go through all 3. 3) Between the two supporting sockets the manufacturer used a split pin, which is a bad design. The manufacturer should have used a full-width spacer pipe, under the tank, with a nut welded on it fastened with a screw, so that the pipe could not slide to and fro. 4) The small bush for the operating rod should have a short rod, with the correct size hole drilled. Probably most users do not realize that they need to grease the top of the pump. If they do not and tighten up the nut , so that the pressure does not escape, the handle breaks soon or later. Grease is better than oil.
Thank u soo much for your teaching
Could you please explain the following to your Chinese supplier, Ping-Pong Fred. We recently bought one of your knapsack sprayers, which did not last long before the pump operating pipe broke, right next to where the pump rod is joined, weakened by welding. Using thin-walled piping is incorrect engineering. 1) We changed the pipe to thick-walled 16mm O/D pipe. Though there are 4 plastic sockets to support the pipe underneath the tank, only 2 are used, incorrectly. 2) We used a longer pipe to go through all 3. 3) Between the two supporting sockets the manufacturer used a split pin, which is a bad design. The manufacturer should have used a full-width spacer pipe, under the tank, with a nut welded on it fastened with a screw, so that the pipe could not slide to and fro. 4) The small bush for the operating rod should have a short rod, with the correct size hole drilled. Probably most users do not realize that they need to grease the top of the pump. If they do not and tighten up the nut , so that the pressure does not escape, the handle breaks soon or later. Grease is better than oil.
Please, send this same issue to tk@goizper.com He will be happy to help you
Не мога да откача бъркалката на матаби 12л супер греен,както не е показано в клипа защо???
The handle used to pump the pressure suddenly became loose, how to fix?
Tq...sangat bermanfaat
I got birchmeier backpack but I find this design better example clean glass ball instead buy a new new bird cage to fix pressure probblem.
Please do demo video for how to use it for left handed
Please!! A video for LEFT HANDED CONVERSION!!!!
what lubricant do you use for lubricating matabi
We've no preference in one brand or another. Any lubricant would be ok.
ممتاز
Kalau mau beli order nya di mana
Excuse me, could you please write in English?
Thank you
How do I buy a matabi sprayer? because I live in Indonesia
Hello! Please fill in the following form and we will help you www.matabi.com/en/contact/.
Thank you
Ret
my matabi knapsac sprayer will not spray well can anyone advise me on what to do?
Probably the pump seal not working
ماء مع خل
Clean the glass ball on 56sec.