DIY Metal Brake / Bender
Vložit
- čas přidán 26. 06. 2023
- I've been wanting to build this for some time now. works great! I will make a finger brake attachment soon. Please like and subscribe. I built this for just under 30 bucks and I use it all the time! I saved a ton of money over buying the SWAG Offroad metal brake. Please see original video for a more detailed build process.
Full length video:
• DIY Press Brake
Material List:
Base plate -6X22 X1/4 or thicker
Angle- 1X 22 3/16 thick (2 pieces)
Rod- 3/4 inch thick rod 6" long (X2)
Tube- 3/4 ID 3" long (X2)
Brake bar- 3/8 thick 20"long x4"
springs- SP-9734 (1 1/8 "OD X 3")
www.amazon.com/Prime-Line-Pro...
What is drop Steel? Go to your local Fab shop and they will have a pile of "drop" which are cut off pieces from their projects. Because they are cut remnants, they will sell them to you for a fraction of the cost. In some cases they will just give you the smaller pieces. I buy all my steel from the drop pile. NOTE they will charge you for each cut so just buy it big and cut it down at home.
Follow me on Facebook and Instagram for more updates
Instagram : Scantrons_Garage
Facebook: Turk Turkleton
Email fscantron13@gmail.com
#metalwork #DIY #Tools #welding #automotive - Auta a dopravní prostředky
That came out real nice
Thank you! and it is super helpful in the shop
Thank you for the idea.