Derbi Senda Sm 50 Tuning Story. Tässä viimekesän aikana rakenneltu derbi. Unohin monia osia kuvata koko projektista ja joitain lisätä tähän videoon mutta tässä nyt suurin osa
Congratulations brother, your derbi is very clean and not toxic in part colours. I have a derbi too and I hope mine, once its finished looks as great as yours.
good skills, i buy cheap bikes too, but i flip them +befor making build out of them but i got a hold of a moped for free andi will make a build plus tuning too😆😁. keep it going
@@cleanderbi it is profitable if you keep in mind the expenses that ur gona put on it to make it run and sell good so u pay good for your interest and second have it until u fix it and dont atach to it ( atach to ur bike ) but not the one u wana flip
You cannot put the original forks upside down, so I bought the forks from someone who had them just lying around. They are from a cross bike, but I do not know what bike. They needed alot of modifying to be put on the bike.
@@xerofx08 I got a Paioli usd forks, which are rare nowadays. Then I made an adapter plate and modified an keeway scooter front brake to it😂😂 it was challenging but it works so🤷 it took alot of time tho
@@JonneIlmanMankia nosiis on ne kärkkäiseltä mutta ne eioo ne kaikista halvimmat maalit. Ja sit mokesti maalates tärkeimmät on ne poohjat ja lakka. Sillon pitäs pysyy aika hyvänä maalin👍
thanks alot, and this was my first ever project, so I wasted lot of money but I spent around 1500 euros. I could have saved alot if I had experience XD
Hioin vaa tarpeeks eri papereilla sit huopalaikalla ja kiillotustahnalla kiilto pintaa, sen jälkee suojasin ton kiilltokohan ja maalasin muun kopan mustaks
Rälläkällä nätisti hioin sillee että just ja just lähti maalit pois tuo on alumiinia nii ei ala ruostuu mut kanttii olla varovaine ettei ota liikaa materiaalia pois
Rälläkäs semmonen vihree tyynymäinen laikka joka on fine laatua ja sit sillä vaa oha kokonaa puhtaaks ja huopalaikalla ja kiillotusaineella kunnolla kiiltäväks. Myös oon kiillottanu nuita putkia semmosilla rälläkän kiillotus seteillä kannattaa kokeilla
@@cleanderbi is it the old gianelli exhaust? the gias look nothing like your exhaust, you made that exhaust soooo beautiful, could you make a tutorial on how you did it? please make more videos😂
I really apreciate that man, but I cant make a tutorial... The giannelli exhausts do not look the same as mine, because mine is polished carefully. so a giannelli exhaust, polish it to mirror, then heat the welds so it tkaes the color. Hope that helps you!@@ali3173
Beautiful derbi, It inspired me a lot for when i start building mine ✌️
Means alot to me man!🙏
Incredible man, i love your motivation, the bike is simply beautiful 😍🙏.
Good job 💪
Thanks alot man😊
Congratulations brother, your derbi is very clean and not toxic in part colours.
I have a derbi too and I hope mine, once its finished looks as great as yours.
New sub
Thats great to hear man! Im sure if you put dedication it will look amazing. Keep up the grind
Very nice bro!!! I am xurrently also building something out of my moped
Thats awesome bro!👌👌
Where did you get the headlight?
Very amazing derbi build👍🖖👌🤟🤏 i hope you dont over wheelie that yes
yooyo, how did you paint the clutchcover? U use any primer or just straight to the black spray?
I did not use primer, sanded it goon so the paint sticks to it better. I recommend using heat proof primer so it does not boil if you use primer
Komee mopo ja kuski🥰😍
Very nice bro i have a little question how much did you spend on tuning?
In this video, the total cost is about 1600€ including the moped so tuning about 1400€😅😅
😍😍
what a clean build, and that gia exhaust, really fucking beautyful, clean bike bro, keep it up
Thanks man means alot❤
Aisaatana😍
Kiitos🥰
good skills, i buy cheap bikes too, but i flip them +befor making build out of them but i got a hold of a moped for free andi will make a build plus tuning too😆😁. keep it going
Thanks man! And sometimes flipping bikes is profitable👍👍
@@cleanderbi it is profitable if you keep in mind the expenses that ur gona put on it to make it run and sell good so u pay good for your interest and second have it until u fix it and dont atach to it ( atach to ur bike ) but not the one u wana flip
You could put some other Brake discs on the Derbi.🤩😊
I changed rear brake disc couple days ago, it looks alot better. Mayde the front one too someday
There are a few good brake discs on Gearparts.24🤫👍
One Question🙏, where did you bye this Upsaiddown fork?
I bought it from a guy that was gonna throw it away, moded it to the derbi and repaired it.
Where did you buy the bolts and blue levers?
Aliexpress, China
what did u wrap the forks with and where to buy?
Found some matte black wrap from the corner of my workshop, so I don't know where it was bought.
what is the grips called that you have on your bike
They are called Protaper grips blue and black
dope bro
Thanks man appreciate it alot🥰
@@cleanderbi EMail ? I would like to share a photo of my bike with you
@@rasko7109 send it on ig direct to me @cleanderbi 👌👌
kur pirkote?
were did u buy the forks? or can you just invert them=
You cannot put the original forks upside down, so I bought the forks from someone who had them just lying around. They are from a cross bike, but I do not know what bike. They needed alot of modifying to be put on the bike.
Wow bro Really nice bike i think i will do it like you blue black😈❤️😈🤝
Nice bro🥰
ihana dööpi
Kiitos sinäkin
🏍️🔛🔝😍
Nice build but where is the front brake?
when I got the new forks, the old brake system did not fit. iI have now gotten a new one and it works.
@@cleanderbi Did you get a new brake or new forks? What forks and what brake did you buy?
@@xerofx08 I got a Paioli usd forks, which are rare nowadays. Then I made an adapter plate and modified an keeway scooter front brake to it😂😂 it was challenging but it works so🤷 it took alot of time tho
Käytiks spraymaaleja vai ruiskua toho kytkinkopa ja katteide maalaamisee?
Kaikki nuo muovi osat on spraymaalil ja sit kytkinkoppa myös mut ne on maalattu hyvil maaleil ja pohjil että kestää.
@@cleanderbi ai niiku iha kunno liikkeestä hommatut vai joku 2k motonetist
@@JonneIlmanMankia nosiis on ne kärkkäiseltä mutta ne eioo ne kaikista halvimmat maalit. Ja sit mokesti maalates tärkeimmät on ne poohjat ja lakka. Sillon pitäs pysyy aika hyvänä maalin👍
@@cleanderbi ok kiitti boss 💪
I love this build could you say how much did you spend to revive it back from the dead?
thanks alot, and this was my first ever project, so I wasted lot of money but I spent around 1500 euros. I could have saved alot if I had experience XD
@@cleanderbii put 7900eur in my 2 fast rieju
@@brzdax7296 yeah I can imagine that. 2 fast is soooo expensive but everyones dream🤤
what wrap did u use?
Im not sure its just matt wrap from our local wrap store, its some cheap wrap so not the best but Im sure you can find it :)
miten kiillotit ton kytkinkopan?
Hioin vaa tarpeeks eri papereilla sit huopalaikalla ja kiillotustahnalla kiilto pintaa, sen jälkee suojasin ton kiilltokohan ja maalasin muun kopan mustaks
Mite sulla virtalukko kii tuola sivussa
Paril nippusiteel pumpussa kiinni tuos maskin takana😅
Millä wräppäsit noi usd keulan jutut'
Jotain halpaa mattamustaa autoteippiä en muista mistä ostettu
Miten sait tollasen kromi reunuksen noihi vanteisiin
Rälläkällä nätisti hioin sillee että just ja just lähti maalit pois tuo on alumiinia nii ei ala ruostuu mut kanttii olla varovaine ettei ota liikaa materiaalia pois
Miten sait ton putken tollee putsattua pitäs itekki saada jos voit kertoa
Rälläkäs semmonen vihree tyynymäinen laikka joka on fine laatua ja sit sillä vaa oha kokonaa puhtaaks ja huopalaikalla ja kiillotusaineella kunnolla kiiltäväks. Myös oon kiillottanu nuita putkia semmosilla rälläkän kiillotus seteillä kannattaa kokeilla
Missä maalautit rungon ja paljon makso
@@Seelimm maalautin ylivieskan laaksojen laatupinnalla ja makso kaikki osat yhteesä 240€ pohjatöinee
@@cleanderbi okei
Mistä ostit tota teippiä tai kutistesukkaa noihin haarukoihi
Se on mattamusta autoteippi mutta en muista mistä ostettu. Tais olla vaan joku halpa teippi jostain kaupasta🤷
Mikä penkin päällinen
Kiinasta mtilasin jonku halvan makso vaan 12 euroo mut suht huono laatunen oli ja ostin jo laadukkaamman tilalle
seksikäs ajoneuvo
Virittäjän video ollut inspiraationa selvästi
hieno mopo
Alkuperäne derbi oli parempi🙄
No niin kyllä oli
Tnt tuning😂😂
Tuli kisasähköt ja porasin tost paskakopast sen homman poisa nii ei oo enää sitä tnt logoo😂😂
Koko koppaa vittuu vaa
Ja enempi yksityiskohtia massa derbi
@@homosaatana joo ei ollu tarroihin varaa ne tekee sairaan paljo mut ei kyllä ole massa derbi😂😂
@@cleanderbi s6rt tarra rungos ja basic kiiltävä musta
vitun pähee
bro which exhaust is that?
It is a giannelli exhaust for derbi.
@@cleanderbi is it the old gianelli exhaust? the gias look nothing like your exhaust, you made that exhaust soooo beautiful, could you make a tutorial on how you did it? please make more videos😂
I really apreciate that man, but I cant make a tutorial... The giannelli exhausts do not look the same as mine, because mine is polished carefully. so a giannelli exhaust, polish it to mirror, then heat the welds so it tkaes the color. Hope that helps you!@@ali3173