Video není dostupné.
Omlouváme se.

How to change a front shock strut on MERCEDES-BENZ B200 (W245) [TUTORIAL AUTODOC]

Sdílet
Vložit
  • čas přidán 14. 08. 2024
  • How to change a front shock strut on MERCEDES-BENZ B200 (W245) 2.0 Hatchback 2005-2011 [TUTORIAL AUTODOC]
    Shock strut on MERCEDES-BENZ A-Class (W169) (09.2004-06.2012) cars should be replaced, as a rule, according to one and the same procedure.
    However, there can be slight differences due to specific features of the vehicle design.
    🔝 Top brands that produce shock strut: BILSTEIN; SACHS; MONROE; RIDEX; STARK.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials....
    🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
    Springs: www.autodoc.co...
    Springs for MERCEDES-BENZ B200: www.autodoc.co...
    Shock absorber: www.autodoc.co...
    Shock absorber for MERCEDES-BENZ B200: www.autodoc.co...
    Strut mount: www.autodoc.co...
    Strut mount for MERCEDES-BENZ B200: www.autodoc.co...
    LIQUI MOLY Chain Spray: www.autodoc.co...
    WD-40 Grease Spray: www.autodoc.co...
    LIQUI MOLY Fast Cleaner: www.autodoc.co...
    All video and pdf tutorials on MERCEDES-BENZ B200 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
    🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
    🛠️ The tools you need to replace a front shock strut:
    - wire brush
    - WD-40 spray
    - brake cleaner
    - copper grease
    - combination spanner no. 12
    - combination spanner no. 17
    - combination spanner no. 19
    - drive socket no. 10
    - drive socket no. 12
    - drive socket no. 14
    - drive socket no. 17
    - drive socket no. 30
    - HEX bit no.H6
    - wheel impact socket no.17
    - ratchet wrench
    - torque wrench
    - tap wrench
    - hammer
    - pin punch
    - flat chisel
    - round nose pliers
    - clip removal tool
    - chain wrench
    - ball joint puller
    - hydraulic strut spring compressor
    - hydraulic transmission jack
    - fender cover
    - wheel chock
    Was this video helpful? Give it a thumbs-up and share it with your friends!
    Have a look at other videos on our channel:
    ► MERCEDES-BENZ car repair tutorial - • MERCEDES-BENZ car repa...
    ► MERCEDES-BENZ B W245 car repair tutorial - • MERCEDES-BENZ B W245 c...
    Mobile shop: m.autodoc.co.uk
    📢 AUTODOC on social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    CZcams: / autodocuk
    Instagram: / autodoc_autoparts
    Snapchat: / autodoc.uk
    #autodoc #autodoctutorial #autodoctips
    Disclaimer:
    This video is intended for informational purposes only and does not guarantee achievement of a specific result.
    It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
    This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
    © 2019 AUTODOC GmbH All rights reserved

Komentáře • 10

  • @ericthestone
    @ericthestone Před rokem +1

    I changed an aftermarket struts, the camber is totally off, need to purchase a set of camber bolts to correct the alignment.

  • @alexey9900
    @alexey9900 Před 4 lety

    Good 👍👍👍

  • @peterzarb4601
    @peterzarb4601 Před 4 lety

    Would you have to get the wheel camber checked after the shock replacement

    • @autodocuk
      @autodocuk  Před 4 lety

      Thank you for the feedback!
      Yes, after any replacements related to the suspension of the car, it is recommended to carry out the alignment / camber correction.
      Stay tuned and follow our latest updates.
      Best regards, Autodoc.

  • @TYEGaming
    @TYEGaming Před 4 lety

    Im entering the contest

  • @Tino5569
    @Tino5569 Před 2 lety

    Nice help me know how to change I was asked 250 euros to change

    • @autodocuk
      @autodocuk  Před 2 lety

      Thank you for sharing your opinion!
      AUTODOC

  • @monwabisidubase2427
    @monwabisidubase2427 Před 4 lety

    Also guys you must do Renault clio iv also

    • @autodocuk
      @autodocuk  Před 4 lety

      Thank you for your comment.
      We will take this into account in our new videos.
      Best Regards,
      Autodoc team

  • @boumou3475
    @boumou3475 Před 4 lety

    👍 👍 👍 👍