hola soy nuevo en esto me gustaría saber si estos minitractores harían la misma función o aparecida que los kuas para tirar de los mantos en la aceituna
The front wheel base is no problem. The rear wheel base should be not too narrow and you should use extra rear weight in the wheels or hooked on your 3point hitch! If you turn the front wheels to get more wheel base you will damage your front axle.
Kubota recommends (on dated equipment brochures but is still applicable today) to keep the laden bucket as low as possible when driving it. I am still learning my ropes around my homemade version of the B219 loader :D
Really well done, and works very efficiently.
Very nice, I built my own loader for my B6000. Too stabilize it I put the tires on opposite sides to gain more width. Well done
Manual for b2400 specifically says not to turn wheels inside out.
hola soy nuevo en esto me gustaría saber si estos minitractores harían la misma función o aparecida que los kuas para tirar de los mantos en la aceituna
good job, need counterweights
Super
can you write the dimensions of this loader and hydraulic cylinders? and good Job ;)
Самый мой любимый трактор
Very nice !
Where can I find the videos of you building it ?
Thanks for sharing
hello, sorry, but I didn't film the cooking process.
A cho e hỏi xe kubota máy l3202 giá bao nhiêu
حلوا
his front wheel base width is too narrow for that load, "danger W R."
The front wheel base is no problem. The rear wheel base should be not too narrow and you should use extra rear weight in the wheels or hooked on your 3point hitch! If you turn the front wheels to get more wheel base you will damage your front axle.
Kubota recommends (on dated equipment brochures but is still applicable today) to keep the laden bucket as low as possible when driving it. I am still learning my ropes around my homemade version of the B219 loader :D
🖒🖒🖒🖒🖑🖐👏
Лайк и подписка от моего канала, надеюсь на взаимность
„Home made front loader Kubota l2201dt“: czcams.com/video/aYhHeKX6ZSY/video.html