Twisted Knotted Wire Cup Brush (Gold+Black) || Unboxing and Usage
Vložit
- čas přidán 19. 05. 2021
- TWISTED THREAD WIRE CUP BRUSH, BRASS WIRE M10 THREAD (GOLD+BLACK)
-----------------------------------------------------------------------
🛒 BUYING LINK: amzn.to/3zUDFcs
📌Important Disclaimer - "Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates."
-----------------------------------------------------------------------
Hello friends, In this video, I have unboxed Wire Cup Brush and explained how to use with Angle Grinder machine step by step.
------------------------------------------------------------------------
WARNING :-
NEVER OPERATE THIS MACHINE(angle grinder) UNLESS SAFEGUARDS ARE IN PLACE
------------------------------------------------------------------------
⚠️ DISCLAIMER:-
whatever you are watching in this video should not be tried without proper experience. This video is not intended for children.
------------------------------------------------------------------------
SOME OTHER DETAILS AND FEATURES :-
1. It is easy to use because this product is universal fit
2. Fit most 4" angle grinder
3. Can work maximum 8500 RPM
Specifications :-
▪️Size: 3"
▪️Diameter: 85mm
▪️Thread size: M10
▪️Material: Twisted knotted wire
▪️Wire material: Brass wire
▪️Colour: Gold, Black
Application :-
🔹Fast removal of heavy rust and paint
🔹Cleaning of large metal surfaces
🔹Removal of weld scale and corrosion
🔹Cleaning and preparing of metal surface
🔹Designed for use with angle grinder
🔹Used for roughening, deburring, cleaning and derusting etc.
✔️Channel link :-
/ kissanhomeengineering
✔️Facebook page:-
/ kissanhomeengineering
LIKE | | SHARE | | COMMENT | | SUBSCRIBE
#wirecupbrush
#anglegrinder
#KissanHomeEngineering
#wirewheelcupbrush
#twistedthreadbrasswire
#metalbrush
Thanks for watching🙏 - Jak na to + styl
![[#15] angle grinder discs for rust removal and paint stripping](http://i.ytimg.com/vi/wflsmTavPkQ/mqdefault.jpg)
i use those brushes for 35 years and they are dangerous as hell because sometimes they grab into the piece you're working on and can rip the entire grinder
out of your hands. And those steel wires do break off, so never ever, and i say again, never ever use them without safety gogles, because i have had hundreds
of those wires being launged into my clothes and skin and even in my forhead, so you sure don't want one in your eyes because then you're blind alright.
Now you can fix skin and bones, but ot your eyes, so do use safety gogles because i have 35 years experience, so i know what i'm talking about.
Thanks again for sharing your thoughts......we've always used safety gear and I'm glad you informing the younger youths
Probably because these cups aren't for elevated RPMs
Thanks for sharing
@ Hello Lord sinclair. They are made for an angle grinder alright, and this one in the video with the twisted knotted wires are the better ones because
they don't wear as fast. These days there are sanding disks with pieces of think and hard sandpaper glued on it, and i use those now because
they are waaaaaaaaay much safer than those brushes. And people should learn to "steer" the angle grinder over a work piece,
specialy at the edge of a work piece because you need to tilt the grinder in a position so that the brush won't grab the piece.
So for example when you have a square sheet metal in front of you, and you want to clean the top edge,
then you need to tilt the grinder a little to the left, so that the brush is only making contact from 7 to 11 o'clock ( in case the grinder
spins clockwise that is) because tilted to the right the brush has contact from 1 to 5 oçlock and then the brush will grab the edge and that can cause the grinder to get ripped out of your hands. Anyway, i recomend those disks with layers of sandpaper on them, because those brushes are already dangerous as hell for a experienced person like myself,
let alone for a unexperiënced person. And i know what i'm talking about because i collected alot of scars and about 12 stitches over the past 4 decades.
( excuse me my english because it's not my first language)
@@alphasiera1757 You're welcome! From all tools i think that an anglegrinder is the most dangerous one, because i had a few accidents with them alright,
and also with a very cheap cutting disk because i had one that just exploded to pieces while i was cutting, and that made my little pinky finger
look like pulled pork, so also no more cheap disks for me. It came from a package of 10, and i did throw those 9 that were left in the garbage bin!
what was the thread pitch for bosch grinder it has 2 versions 1.5 and 1.25 cup brush
Hello, I have a question. How often do we need to disassemble grinder and put grease in gears?
EXCELLENT 👌👍 DEMO After watching this video, my doubt is cleared
Can I use this device for ceiling plastic removal
great advice ! thank you .
I use grinder's for grinding cutting cleaning brushing and removing paint and rust I remove paint and rust on a drill also
good job thanks
Well done and liked.. wire cup brush comes in 2 types in the market as you shown.. the steel color and the gold color.. what are the differences and which is better for old wall paint removal?
The gold color as you call it is a brass wheel, it is a bit more delicate and won't scratch the way steel does
mere pas ye dono cup brush hai par mi grinder pe use nai karta baut dar lagta hi kahi nikal na jaye
I have a angle grinder too and a wire brush
Vibration very hard that brush
nice demo
Sir ye brush long lasting hai
Hole sale main kis gaja sy mily ga
Can its use for wall paint remover?
A separate brush will come in handy for that, it is only for metal.
We used the black one for wall paint remover But it erodes quickly
Erodes
why my grinder vibrate so hard when using that
The vibrations are coming from an unbalanced wire wheel, or one that is spinning over it's rated speed. Should have nothing to do with the grinder.
The problem might be in your attachment and not the grinder.
Try using a smaller diameter cup brush, they are rated for higher rpm, and usually dont vibrate as much as the larger wheels.
The problem is either with the grinder or the wire wheel. So swap the cut-off wheel and the wire wheel to see where the problem is. If it's the grinder, take it back to HF and swap it. If it's the wheel, you might have to buy another.
@@KISSANHOMEENGINEERING thx
What is cost of the grind attachment
Link in description
Max rated RPM is 8500 but all Angle grinders are 12000 RPM.. How does that work? Safety??
12000 RPMs are at no load.
Mera angle grinder esse vibrate karata hai aur ese lagane ke baad angle grinder ko pakad bhi nahi sakate esse lagata hai ese hath se chod de
কোথায় পাবো এটা
Ye Drill machine mai lag skta hai ??
Ha lekin bahut vibration hoga
, ke
Grinders are not meant to be used as polishers. Bosch makes low quality angle grinders and if you continue using it like this you will need to change carbon often and might have to change its armature soon.
Agar bosh faltu grinder banate he to Konsa company attsa he Bataye
@@jyotishmansarma4179 Bosch ne iska upgraded model banaya hai that is better. Baki grinder DeWalt ke ache aate hein.
@@husainsaifee1 Dewalt Ke Dwe4115 angle grinder Loha, Steel ye sab katne ke liye attsa hoga?
@@jyotishmansarma4179 wheel per depend karta hai. machine kat degi
Hello bhai
ji boliye
JESUS SAVES SINNERS PROJECT
! Timothy 1:15 kjv...Acts 16:25-31 kjv...John 11:25-26 kjv
" A prayer to go to HEAVEN "
Luke 23:42-43 kjv
>>> LORD I am a sinner and I believe that JESUS died on the cross for my sins. Buried afterwards, then rose from the dead.
Read Romans 10:9-11 in your Bible
Time is running out !
Read: JAMES 4:14 kjv
HEBREWS 9:27 kjv
Revelation 20:12-15 kjv
Прижигание краски и ржавчины к металлу
Which is best for fast rust removal knotted or wire type?
Knotted
Wire type for finishing
@@KISSANHOMEENGINEERING hello is it work for tails cyment removal
Yes