Injora TRX4M Upgrades! 59mm Shocks,48t Motor,Brass High Clearance Links & more!
Vložit
- čas přidán 14. 06. 2023
- Installing some Injora upgrades to my TRX4M Bronco! Lots of good stuff from Injora to check out.
Injora 59mm Shocks available here
amzn.to/3PdjilK
Injora TRX4M driveshafts available here
www.amazon.com...
Injora high clearance brass links found here
amzn.to/3XaVG31
Injora micro servo with Trx4m mount found here
amzn.to/3JfIcNW
Injora Trx4m overdrive gears found here
amzn.to/3Jdp5nq
Injora Trx4m underdrive gears found here
amzn.to/3XbH2sg
Injora metal low range transmission gears found here
amzn.to/43Yzsnd
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fo...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref...
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Zábava
You drove the Bronco so hard, it got 'tired'. 👍
😂
your rig color looks nice white with those wheels
Man idk whats going on with youtube but i didnt even get a notification for a few videos today smh but very aeesome Matt thanks for sharing
It happens to me all the time! Then I get notifications to channels I don’t even sub to. Unbelievable! I think CZcams is paid by certain companies to push certain channels 🤷🏻♂️. It’s really made me not even like CZcams anymore lol
@@2fmrc facts bro but i watch stuff on here that i cant no where else
I just did the same build on my TRX4M. Works great save for the servo. It blew out my Rx/ESC. Used a NSDRC instead and that servo is AMAZING!
My Rock Van arrived today. First thing, toss the stickers, then swap wheels and tires for now...
Bad bro your videos are so able to relate you were so able to relate to you it's like we're just hanging out you know you're showing me what you're doing I don't know like this is scriber count and if you count to be way higher everybody needs to subscribe
Nice "scoot" maneuver 👍
Injora is the best! Qaulity products and it ships pretty quick from China!
I have the 48 with crawler gears with a meus chassis with the 53mm and an old spektrum 107 servo my daily driver for sure
Awesome video Matt!😊
Bonjour de France ✌️
Très bon comparatif 👍
Quels sont les pneus montés sur le bronco ??
I have to admit, I am a bit skeptical of the effectiveness of high clearance links on ring and pinion axles since the driveshafts are even more exposed than they were already with straight links.
I know you have moved onto brushless with the TRX4M. One thing that no one has covered yet is the Meus crawler gearing. I know the best way forward is a brushless set-up but for those starting out or happy to remain brushed, I want to see if you have tried the new gearing with a faster motor, e.g. Injora 48T and the Meus 25.87:1 gearing. Its midway between stock trialling and crawling - if it still produces slower crawl but giving back some much needed speed it would be a great for those on a budget!
Great vid
Drive it till the wheels fall off!
Hello, hope you see this, what are the wheels and tires on the bronco? Tire size please! Thanks! Are those your preferred crawling tires? I have 62x22 from injora they rub so just curious thanks!!
👍
How do u like the tarantula build over the bronco. The jeep looks cool also. Tarantula looks like it performs good. Pretty much done with my bronco build other than my injora shocks came with the wrong size brass pivot balls for lower rod. Another two week wait lol. Thanks
We’re you able to get those Injora drive shafts to connect in phase. I got 2 sets and both of them had the same issue where the front wouldn’t connect in-phase.
No the front is off no matter what you do just a hair. I don’t think it matters too much on these small crawlers but a higher speed rig it definitely does. I usually try to line them up but most of the time it’s not a big issue for me.
@@2fmrc I was just curious. I can still see some cogging at medium throttle even though the speed is low. They just came out with the black version of the driveshaft and at least the stock photo shows it in-phase so I’m willing to give Injora another shot.
So many questions as the TRX4M is a new project of mine :) You cover a lot around tires, can I ask if you have run 62-64mm tires on the Bronco and what sort of offset, extensions, arch shaving is needed for it to work? Is bigger better for tires? It certainly looks good :)
You have a kildeer nesting in the gravel somewhere nearby.
Yeah they are constantly nesting there. The kids hate it so bad because they always end up getting ran over. We were watching one batch of eggs and being careful but the garbage truck (I think) came through to my dumpster in the back and hit them. Then the last ones got hit by a bike, one of the kids friends was riding and didn’t know they were there. My wife was like why do they keep nesting there? Haha!
That's just what they do
do you have any problem with the torque twisting the body? if so, what did you do to fix this?
Loving the new outdoor crawl rock and concrete you made. 👍🏼I went back to stock shocks on my bronco. I felt the longer shocks made it more prone for the front end to lift and come over on steep climbs. Also how did you get that pinion off new injora motor to swap out for the crawler pinion gear.Torch? 13:48
I just left the pinion it had on it and swapped the gears in the transmission.
@@2fmrc Thanks. 👍🏼
How do you think a trx4m would do with the stock fcx24 esc?
I think it would probably work pretty well. Just have to make adapters for everything to plug up
Yeah
Great vid
Just wanna say i dropped a few subs with the Traxxas whinging like ccxrc and minircshop. Traxxas supported ya local hobby store's with the trx4m and these CZcams dudes made money selling parts for them.i never saw a problem.isnt Traxxas a USA company
Yeah I think they are out of Texas. I kinda mentioned it in a couple vids but once I found out how things really went down I wasn’t too mad at them. I don’t really have a dog in the fight because I’m not slapping my name on parts for any of these trucks so I just go with the flow lol
Injora > Traxxas