RC Crawler Droop Suspension Setting using Cheap China Shock Absorber
Vložit
- čas přidán 22. 07. 2021
- RC Crawler Droop Suspension Setting using Cheap China Shock Absorber
shock absorber:
Check out 4PCS 1/10 RC Crawler Metal Shocks Gray 70mm 80mm 90mm 100mm 110mm 120mm for SCX10 Wraith RR10 TRX4 TRX6 ABSiMA Sherpa 3 orders at 14% off! RM43.00 only. Get it on Shopee now! shopee.com.my/product/2889731...
MYR 64.62 30%OFF | FIMONDA 4PCS 1/10 RC Crawler Metal Shocks Gray 70mm 80mm 90mm 100mm 110mm 120mm for SCX10 Wraith RR10 TRX4 TRX6 ABSiMA Sherpa
a.aliexpress.com/_mPw7jvN
spring:
Check out d0.6*D6MM Pressure Spring Release Spring Compressed Spring Return Spring Mechanical Spring Wire Diameter 0.6mm, Outer Diameter 6mm 10PCS for RM17.98. Get it on Shopee now! shopee.com.my/product/1724007....
Check out d0.5*D6MM Release Spring Compressed Spring Pressure Spring Return Spring Wire Diameter 0.5mm, Outer Diameter 6mm mechanical spring for RM18.28. Get it on Shopee now! shopee.com.my/product/1724007....
Song: Unknown Brain - Why Do I? (feat. Bri Tolani) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/WhyDoI
Watch: • Unknown Brain - Why Do... - Zábava
Ouch! Don't use pliers on the shaft. Use side cutters on the tip of the thread to avoid scratching the shaft. That would damage the oring in the long run. Smoothness of the shaft to oring is king.
Thanks for the tips. Really appreciate it. 🤩
simple and easy to diy.Thanks for sharing .
Cool interesting video, excellent work my friend!)🤩💥💯👍👏
I just did the same exact thing to a set of cheap internal spring shocks, the cool thing about these friction shocks you can quickly swap different springs without getting oil everywhere.
One thing to note, the shocks i got are listed as longer length than they actually are. To get 100mm shocks, they were sold as 112mm
Mantap atas perkongsian
Nice bro 👍👍😍
Thanks 😃👍
I use pen springs Keeps the body from unloading
Did it cure some of the torque twist? The pen springs go inside on the shaft, right?
Nice setting...Make a video how it runs man.
I will do it as soon as possible
what if i keep using external spring? does it change something? or should i just use 2 shocks? 1 normal shock and 1 dropshock? need your response. thank you
kalau tetep pakai per luar gimana? bakal merubah sesuatu gak? atau pakai 2 shock aja? 1nya shock biasa, 1 nya lagi pake drop shock?
I bought a set from amazon and putting oil in them was useless because the plastic pistons have no holes. Hence, the compression was very hard with oil. I wanted to return them but After watching your video, you inspired me to do the same thing with mine. Their 90mm shocks. Can you please tell me the correct measurement of springs I should use for mine?
you can use spring with wire diameter of 0.5mm. the diameter of spring should be 6mm. the length of spring is based on your shock length. 😀
Good tips sir...did u fill with oil shock after that,sir?
currently i did not fill any shock oil. I am planning to fill it in and compare the performance of the shock with and without oil.
Awesome! Tq for the tips.. Hehe any link for spring? Hehe
Check out d0.6*D6MM Pressure Spring Release Spring Compressed Spring Return Spring Mechanical Spring Wire Diameter 0.6mm, Outer Diameter 6mm 10PCS for RM17.98. Get it on Shopee now! shopee.com.my/product/172400708/5833651086?smtt=0.6967998-1627205774.9.
Sy akan letak kt description
@@HoodPJRC tqsm! Hehe
Sy guna 0.5 utk rear. 0.6 utk front
This mod converts the shock to internal spring so you do not need the external springs installed correct? Just making sure... Subbed and liked!
Yes. only internal spring are used
I’m assuming if you wanted it half way sprung you’d just cut the spring in half?
Yes. 👍
What’s the total length after the modification?
Its 80mm. The shock origanal length is 110mm
Bang mhu tnya klau absober 90mm brpa ukran spring nya?
beli je yang paling panjang. then potong ikut kesesuain panjang shock absorber