S550 Mustang Carbon Fiber Steering Wheel step-by-step Installation, Tips and Tricks!
Vložit
- čas přidán 5. 06. 2023
- What’s up everyone!
Today we are showing you how to install any carbon fiber steering wheel on your s550, this one is from GalaxyCustominc
-Intro: 0:14
-Tools you’ll need 01:49
-Removing the battery 02:37
-Removing Airbag 04:19
-Removing Steering Wheel 07:39
-Removing stock steering wheel components 08:18
-Transferring stock components to aftermarket steering wheel 16:35
-Checking our work 28:00
-Installing aftermarket steering wheel 28:58
-hook up the battery/ checking our work 29:00
JOIN OUR PP MEMBERSHIP TO SEE THE BEHIND-THE-SCENES OF THIS VIDEO:
ppflco.com/community/membership
-(PARTS IN THE VIDEO)
- HIT US UP FOR YOUR CUSTOM STEERING WHEEL AT SALES@PP-FL.COM
- ppflco.com/products/parker-pe...
- (FOLLOW US HERE)
If you’re looking for more content, you gotta follow all of our social media pages!
linktr.ee/parkerperformancefl
Tag us and use #ParkerPerformance to see your posts.
PP Merch is ON SALE!
⚙️ Shop : ppflco.com
OR EMAIL US:
📧 Email: sales@pp-fl.com
-(PERSONAL INSTAGRAM)
@Midiabl0
@Letscrea8
@mr.297__
@boostinbobby
#ParkerPerformance #ParkersGarage #RepeatOffender #CZcamsChannel #ForEnthusiastsByEnthusiasts #Florida #FloridaS550 #Letscrea8 #Mustang #Carporn #MustangParts #PerformanceParts #Love #postoftheday #trending #MustangEcoBoost #MustangGT #Carstyle #Carenthusiast #USDM #Supercharged #Turbo #Instagood #IGreels #DopeShit #carreels#800whpclub #gt500 #gt500mods - Auta a dopravní prostředky
This was by far the best tutorial I found and helped me finish the job. Especially showing what the clips look like inside the wheel. Thank you!!
Allen key really works to get that air bag out. It take way less tries to get it to pop.
I have a 6R80 and now I am way more confident doing this on my own after seeing this video. The only gripe, if there was any, would be the different pattern of carbon fiber. 🫠 great vid thank you!
Very thorough, thanks very much 👍
Oh my this is amazing … now i want this
Thanks for the thorough install it walked me through it step by step
Awesome video, saved from a lot of pain🤙
Subscribed
The same steps can be applied when adding paddle shifters to base model ecoboosts (2021+ years), as they did not come with paddles.
Find a donor wiring harness from eBay from a GT. Take the wiring harness, paddles and plastic backplate from the donor wheel and put it together in your steering wheel.
Disclaimer: at some point, ford swapped the horn connector so you may need to do a bit of cable splicing to change the connector. Also make sure the donor wheel matches the same orientation of dash and radio buttons as your steering wheel.
That thumbnail is the only thing I clicked for! 😂
Great video, made this job a breeze for me. Hardest part was getting the air bag clips freed up at the start. Tips: use a screwdriver with a thin round shaft. It needs to be free to pivot a little in the hole so you can get the angle right. It also needs to be long enough that the handle does not hit the paddle shifter, which pivots the blade off of the clip if it does. Finally, don't use one with a small diameter handle, or put a socket over the end of the handle to give you a big surface to push on with the palm of your hand. My clips had straight wire, no bend at the end. I think that made it much more difficult to depress them fully without the screwdriver slipping off. After I was done, I realized a long 1/8" punch might have worked better.
Looks awesome. I want this wheel so bad too, plus if I do I should make sure to do the carbon fiber inserts at the same time!
what a coincidence I just installed a gt350r on mine, the alcantara feels so good
You da man
Galaxy Customs is the best!!!!
jesus all those tools lol all I needed was an allen key to pop the airbag, then torx20, torx50 plus (I think 22+ are no longer the hex bolt), torque wrench, and blue loctite
i cant get the airbag off ! 🤦🏽♂️🤦🏽♂️ pissing me off
I’m from the future, I’m feeling your pain you had that day😢
“Optimal” 😂😂
How to I get the airbag light off my dash now lol. Everything work’s probably and I triple checked nothing was pinched.
Mnmmm no airbag light should be popping up.
I have the same issue
Did you find your issue ?? I’m literally having the same one
@@jonnysrt4666 you guys shouldn't be getting any airbag lights, unless something is wrong. I would say start over by disconnecting the battery, and re-pulling the airbag off the front of the steering wheel, and then making sure you have the wiring correct and there aren't any pinched wires in the install. Put everything back together, and then reinstall the battery terminals. Having installed hundreds of these at our shop since 2015 - we've never once had an airbag light after installing.
@@certified_vato2387 you guys shouldn't be getting any airbag lights, unless something is wrong. I would say start over by disconnecting the battery, and re-pulling the airbag off the front of the steering wheel, and then making sure you have the wiring correct and there aren't any pinched wires in the install. Put everything back together, and then reinstall the battery terminals. Having installed hundreds of these at our shop since 2015 - we've never once had an airbag light after installing.
😂😂😂😂😂
If my steering wheel is wobbly can I just tighten the 24MM nut??🙏🐿️🔩