How to fix Toyota Corolla AC Heater Air Vent position AC control Knob (DIY Repair)

Ventilation control cable repair. In this video, I'm showing you how to fix the ventilation position control knob DIY without replacing it with a vent control knob. This video is similar to all the versions of Toyota Corolla cars that come between 2007-2013 with Manual vent control knobs. Toyota Corolla AC selector switch repair.
Subscribe LahisTech: bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you.
A. How to Make a Rechargeable Emergency Light // DIY Flashlight - • How to Make a Recharge...
B. DIY 100W LED Flashlight Make using PVC Pipe | PVC Pipe Flashlight - • DIY 100W LED Flashligh...
C. How to make PVC Flashlight Torch using Motor Bike Fog Light (Dual Mode LED Torch) - • How to make PVC Flashl...
D. How to Make Flashlight from Spray Paint Can | 12V 50W LED - • How to Make Flashlight...
E. How to Make a mini LED Torch using Syringe - • How to Make a mini LED...
F. How to make Rechargeable Emergency Light by 30W COB LED // DIY Camp Light - • How to make Rechargeab...
G. Emergency Light with Bluetooth Speaker- • How to Make a Recharge...
H. DIY PVC Table lamp - • How to make Table Lamp...
I. Rechargeable Emergency light - • How to Make a Recharge...
J. Spray Paint Can Light | 12V 50W LED - • How to Make Flashlight...
K. 12V 100W || DIY Flashlight 100W - • How to Make Emergency ...
L. Mini 18650 Power Bank - • How to Make Mini 18650...
M. Rechargeable Emergency Light // DIY Flashlight - • How to Make a Recharge...
N. Rechargeable Emergency Light by 30W COB LED - • How to make Rechargeab...
O. How to make a mini torch using syringe - • How to Make a mini LED...
P. Motor Bike Fog Light (Dual Mode LED Torch) - • How to make PVC Flashl...
#toyota #corolla

[@tru_spartan_117]

The soldering was tough but I was able to fix it with your video, thank you bro🙏

[@whiteunclerukus]

Crazy to find a video like this and it’s exactly what I was looking for, for my brz since they use Toyota’s climate control

[@user-nd4qe1nx8h]

رائع عمل مذهل وتصوير ممتاز شكرا

[@alejandrocarpi3128]

Can the fan speed dial be fixed or should I buy a new one?

[@Yaaziel]

So, my AC/heat knob stopped working and my mechanic does something twice a year that simply toggles between heat and AC, and he never charges me. I'm trying to figure out what he does, as I don't think it's quite this involved. Great video!

[@LadyhawksLairDotCom]

OK, I'm a bit stuck. I snipped off that brass coupler and on the left side of the wire, three tiny horse-hair sized pieces are no longer with the rest of the wire. No bueno. That's the first issue.
The second issue: I don't think I gave myself enough slack. How much more sheath can I safely cut away before the cable will no longer reach the control panel?
I have NO CLUE what I'm doing. I just don't have the money to get this thing repaired...could use some guidance.
Perhaps if I trimmed it back a bit and made sure the wire was long enough, I could cut away the frayed bit? Thing is, I don't know how far back it is frayed. It may have even been the cause of the malfunction: three bits of wire may have detached somewhere inside and caused the thing to go "SPROING!" I don't know.

[@jannaolson3197]

Thank you soooo much!

[@Bignardo18]

Excellent video😮

[@imran.user-sx9rt2qm5d]

V nic👍🏻

[@frederickcaligan7595]

Sir nice video....do you have any repair shop that i can go

[@petrochemicals4u]

👌

[@ismailbilgic1989]

Güzel bir video benimkinin sorunu aydinlatma isiklari yanmiyor yeni bir video cekme imkaniniz olsa fena olmaz

[@jenannturner]

@lahistech could I get away with just sodering the copper wire and not adding the melted other wire to it?

[@turbodog99]

Solder is the addition of the "other" wire, the solder. So, NO, you can't.

[@toxiunknown]

Guys, do not try this by yourself. My cable was exactly damaged like this and I did exactly how this guy repaired the cable but the problem is not because of the damaged cable the problem is that the cable is stuck at one position somewhere inside the dashboard or where the hot/cold air is exchanged. This method damages your genuine cable and doesn't fix the issue so please contact the professionals instead of doing it yourself.

[@Mars-zgblbl]

My 09 Corolla’s selector knob was stuck on defog, far right. Traced the pulley cable to “slave” pulley inside dash. This operates a little door. The door has foam rubber seals around its edges. It’s difficult to access. Glue from the seals can flow in hot weather, gluing the door shut and making the selector seem stuck too. I used Armor All on the door edges and it hasn’t stuck since.

[@user-fd5kv2zj9t]

I always do it myself

[@davidginchereau]

Dont try this as a beginner.guarenteed you will snap clips.etc good luck

[@danmay6170]

Stop reading this david