Kawasaki Z900RS - 3 Inexpensive, Quick & Easy Mods Reviewed | PYRAMID PLASTICS | PUIG Hi-Tech Parts
Vložit
- čas přidán 21. 07. 2024
- Pyramid Plastics sent me 3 custom mods to fit to my Kawasaki Z900RS. I unbox, install, and review the colour-matched items. There's no pressure; I give my honest opinion of the quality, fit, finish and ease of installation of these 3 additions to the Kawasaki Z900RS. While Pyramid Plastics do their own custom parts for hundreds of bikes, they also offer items by Puig and Ermax. Let me know what you think in the comments below!
**SUPPORT the BlueMarbleRider Channel with some Fuel or Coffee? www.buymeacoffee.com/bluemarbled
It's much appreciated. Thanks!
LINK TO PYRAMID PLASTICS ACCESSORIES FOR THE Z900RS:
pyramid-plastics.co.uk/collec...
_____________________________________________________________
Whether riding enduro or street, The Blue Marble Rider will regularly take you on a journey, review a product, bike, or just simply vlog. Thanks for watching.
______________________________________________________________
BLUE MARBLE RIDER CZcams CHANNEL:
/ bluemarblerider
TWITTER - BlueMarbleRider
/ bluemarblerider
INSTAGRAM: bluemarblerider
/ bluemarblerider
FACEBOOK - BLUE MARBLE RIDER: / bluemarblerider
EMAIL the BLUE MARBLE RIDER:
bluemarblerider@gmail.com
______________________________________________________________
The Blue Marble Rider uses the following riding gear and equipment to record and edit VLOGs:
*STREET ADV HELMET is SCORPION EXO AT950
amzn.to/3aMn6Ua
*STREET HELMET is KBC VR3
*ENDURO/DIRT HELMET is 686 Blacque www.686.com/
*EAR PLUGS (Silicone soft core):
amzn.to/2wV4CSK
*KLIM K-Fifty Riding Jeans
amzn.to/3aJqijh
*JACKET Olympia Waterproof Motorcycle/Teknic Black Leather Bomber
*OFF ROAD BOOTS: Forma TerrainTX
amzn.to/2xRtgn3
*ROAD BOOTS: TCX Hero Waterproof or XBlend Black
amzn.to/2wTSqSh
*INTERCOM:
amzn.to/2wcVd8w
*Insta360 OneX-2 360 Camera
*SKYDIO 2 AUTONOMOUS DRONE with Beacon2+ and SKYDIO Controller
*GO PRO HD HERO 5 BLACK chin-mounted (Proshot Mount) helmet camera with skeleton back for on board audio commentary. I shoot in 4k OR 2.7 K wide/super view at 60 fps or 1080p 60fps unless in limited light, then I drop to 30fps amzn.to/349vdHP
*GO PRO HERO 5 SESSION "B" Camera is bike mounted or mounted on a DIY back pack 3rd person mount 1080p30fps
amzn.to/2UKps0e
*CAMVATE CAMERA/GIMBAL HANDLEBAR CLAMP
amzn.to/3aHrXWs
*GOPRO HERO 5 BACK UP BATTERIES AND TRIPLE CHARGER
amzn.to/2JG2ctS
*Helmet-mounted BACK UP CAMERA BATTERY PACK: NOCOXGRID XB3L Battery Pack for keeping those pesky cams charged.
amzn.to/34b7WoN
*MICROPHONE Lavalier microphone for in helmet audio and for 2 person interviews
amzn.to/2JKcJ77
*EDITING SOFTWARE: Movie Studio Platinum 15 for the PC (for video editing)
amzn.to/2yzsWde
STREET TIRES:
*FRONT MICHELIN ROAD 5 110/80 R 19 M/C 59V F TL/TT
amzn.to/2R8TvfS
*REAR MICHELIN ROAD 5 150/70 R 17 69V TL/TT
amzn.to/2Rbjovr
DIRT TIRES:
*REAR Shinko 520 110/100-18
amzn.to/2JGyXHa
*FRONT Shinko 520 Series 80/100-21
amzn.to/2UG9UKP
MY CURRENT MOTORCYCLES ARE:
2011 Husaberg FE390 Enduro
2014 Suzuki Vstrom 1000 Adventure
2018 Kawasaki Z900RS*
*Chic Design Road Comet Fairing (Samurider.com)
*Luimoto Vintage Diamond Seat Cover (Motostarz.ca)
*Michelin Road 5 Tires
*LSL Handlebar (black)
*Rizoma brake fluid reservoir (aluminium)
*Powerbronze Fender-Extender
*Ivans Performance Products ECU Reflash
*Spiegler Steel-Braided Brake Lines
*Evotec Radiator Guard
______________________________________________________________
Thanks for watching my vlogs. LIKE SUBSCRIBE AND SHARE if you choose. Thanks, BMR.
For any additional enquiries please email me via bluemarblerider@gmail.com
________________________________________________________________
© These videos are the sole property of the Blue Marble Rider. This video and all associated videos are the sole property of the Blue Marble RIder. Logos, images, photographs, text, and videos cannot be used for commercial purposes without the express permission of the page owner and author. Logos, images, photographs, videos or text are covered by intellectual property rights, and as such cannot be used by others to represent themselves or replicated in any way and used as their own original creation. - Auta a dopravní prostředky
Thanks, I've been looking at the hugger and screen. Think i'll spring for them.
Very nice looking hugger and cap covers, but I do prefer the previous wind screen as well
Same here!
Lovely bike,add a tail tidy and a black seat and it will look awesome!!!!
Done: czcams.com/video/EAJQuG4XvBw/video.html
Excellent videos!!
Please post more content!!
❤
Great update! 58k miles on my '18.
Well done with an honest opinion. thanks I enjoy your videos!
Thanks for the feedback, I appreciate it. Cheers.
Hugger looks really good. High quality looking product. Makes you wonder why Kawi didn't go the few extra inches for the obvious difference that's going to make keeping grunge off your bike.
Thanks, Sludgy. As for short huggers, it's all about fashion and convenience: I suspect they had the OEM one in the parts bin from some other model...Was at the Rusted Rake yesterday sipping on a "wandering scottsman spruce tipped ale". Thought of you. Cheers!
Great products, Thanks...
Great mods!
The price of the windscreen is excellent and the hugger is a must have. Did you do a test drive of the new screen, I didn't hear that you did but maybe I missed it. Thanks for the video on one of my all time favorite bikes. Have a great weekend.
Haven't test ridden it yet, but will do, certainly, although I think the impact on air flow will be negligable above the naval. Cheers.
Thx for sharing pyramid
No worries. Cheers.
Off-topic, but SO glad you still have the beautiful Griso. I’d like a V100, but already have a BMW R1200 RS for touring. One day I’ll get a Guzzi, the next one they do will be a new Stelvio - that may be the one, if not too tall. Good vid - the Z900RS looks great.
Thanks. Neither the Guzzi Griso or Z900RS will be leaving, they're such great bikes, even for a v100. The Vstrom, on the other hand...hmmm!
Awesome video, thanks! The silver bits (heel guard, side panels, radiator side cover, front fender bracket covers) on the Z900RS drive me crazy! They match nothing else on the bike and always stand out to me, they should be black or chrome. It would be great if Pyramid would make replacement parts for these as well?
Probably not, as Pyramid are mainly plastic, although it's a good call. You have two choices though: one paint them, or two www.motocomposites.com/products/radiator-covers-in-carbon-with-fiberglass-for-kawasaki-z900rs-2017-2019.html?gclid=Cj0KCQiAi8KfBhCuARIsADp-A57WQyeutjpu5E4sEIbonG4Pco3bPwiZZqE7Tl-RDay2naaOS-m2GUoaAssXEALw_wcB
Cheers.
I feel the hugger in Flat black for me.
Having watched your previous AWESOME clip on the Chic fairing I ordered one - due to serious bubble head over 110km/h. Waited the painstaking 5 mths - great improvement up to 160 km/h; although noticed the wind not necessarily affecting my helmet but - as I think you noted - hitting me in the chest. I have subsequently added a matt black plastic 'defuser' to the top of the Chic fairing. Gone are the classic looks toward more urban industrial - but the wind protection . . . 170+ (excuse the pun) without a breeze! For that reason I would probably shy away from the Puig.
Great to hear, Jasper. I love mine for sure.
Can you add a link to the diffuser you added?
Man, that's a beautiful bike.
Cheers. It's great when a bike makes you feel good even when it's on the side stand.
Beautiful Griso
Hi looks a real ripper now . :)
Rolley
Cheers, Rolley.
Hugger and caps great, like my yellow ball without screen. 😊
Hi BMR, I see you're a Saints fan when in the UK! 😉
I think Puig is pronounced 'Pweeg' as they're Italian. Good kit, I've had a couple of their flyscreens.
I'll catch up with you when you work on the Griso updates, looking forward to that, we can swap notes!
Yes, looking forward to delving into the Griso, who is waiting patiently for her attention. Cheers.
Aesthetically your original screen is better. It fits with overall feel of the bike. The Puig, although maybe excellent function wise, doesn’t seem to “go” with the overall look.
Cheers.
Agree, although some owners of the more colourful models have shown me their colour-matched puig screens, and they look very good. But, yet, on my bike, the Chick is my personal favourite too. Cheers.
That seat looks great! Wasn't convinced when I watched the install video but really does look good. Only had my bike for a few weeks and loving it apart from the seat comfort. Does this seat cover add any comfort? I wonder if adding it to the original rather than replacing the original would add comfort.
The hugger looks awesome but I'll be sticking with my own custom-made cap covers (a couple of screwtop wine bottle caps stuffed over the top of the with double-sided velcro tape - quality!).
Keep up the good work on the vids.
I wouldn't say the seat cover adds much comfort. Saw an interesting and highly subjective seat the other day - certainly comfortable, but the looks depend on your perspective. It's a Bagster seat, with Bultex foam. If you are a member of the Z900RS forum (easy and free), then take a look at this: www.z900rs.co.uk/index.php/topic,1818.msg29072.html#msg29072
Cheers BMR
Damn that looks comfortable. Tough one though cos I really like the lines of the stock seat, but it is a pain in the... (literally).@@BlueMarbleRider
I fitted a pyramid hugger and find it a bit too flexible on the back end and just rest on the Swinging Arm will be modifying it myself to make a better fit I contacted pyramid company and they said he was fine to them so people just look at other before you make up your mind
The hugger looks awesome but that flyscreen is an eyesore in my opinion.
Thanks for the feedback. Agree on my bike. Some of the colour matched flysreens on the coloured Zs seem to work better.
Well done video, but you forgot one thing: you gotta crank the bike and rev it a few times. :) Always. We live for the ride.
Good call!
Would you mind elaborating on the beautiful seatt you have on your bike? Please let us know where and how you got it? Many thanks!
Hi, Al: it is a Luimito seat cover. czcams.com/video/Kt4AuTZZyI8/video.html
What is the manufacturer / model of the windscreen you removed?
It's a puig vision flyscreen. Cheers.
Hi,I am from UAE ,do have any plans to sell the old parts pls let me know
Hi, Sundeep, I'm not sure the price of postage would make it worth your while (Canadian postage rates are astronomical). I will likely keep my original Chic Fairing and sell on the OEM Hugger and the pyramid/puig handlebar fairing. Cheers.
*How many motorcycle jackets is enough motorcycle jackets? This garage says there's never enough motorcycle jackets.* LOL
Isn't that the truth!
What brand of seat is that?
It's a luimoto seat cover. Frustrating process...video here: czcams.com/video/Kt4AuTZZyI8/video.html
I would have kept the original Kawasaki cowl, considering they sell it for over $700.
I still have it: yours for 699 :-)
Much prefer the bikini fairing than the screen.
Good to know. Cheers.
May I ask your age? I’m 55 and wondering how much longer I have to ride.
58 - keep riding! I don't intend to stop until I'm unable to swing a leg over. I do a lot of physical exercise to keep me fit - partially because I like it, and partially because if I want to continue to ride off road, I need to stay in good shape for safety sake. Cheers.
@@BlueMarbleRider thank you for reply you are an inspiration for me to keep going-- Godspeed !!!
I'm 76 and still riding every day. I will stop when I change my mind. I do live in the South of France. With the roads & weather in the UK, I don't know.
@@frankstocker5475 I'm envious, Frank!
pronounced pweeg
Hello ,Pyramid fly screen for Trident 660 Triumph ?
I would guess that is likely available.