Я участник вашего канала из Ирана. Я преподаватель-пилот сверхлегких самолетов. Полет был очень красивым. Я бы тоже хотела полетать на вашем вертолёте ☺❤
Снаружи прям конфетка, но когда камера заглядывает внутрь, то восторг убавляется. И обрамление приборного щитка и клей по периметру остекления кабины, выглядят по колхозному. Стоп-кадр нажмите ... Но всё-равно лайк и уважуха этому самодельщику!
Interesting video, and even more interesting comments. How about that hangar though? It's immaculate! You could eat off of that floor. Other than the impeccable housekeeping of the hangar, the main thing that struck me is this tiny copter having an electric starter. I am thinking about the extra weight for the starter motor, engagement mechanism, and battery. I viewed another video recently about a small, single-seat helicopter powered by an approximately 50 horsepower piston engine, and that had a pull-start. At the time of originally viewing that video, I thought it a little dicey to fly a helicopter with a pull-start engine (it put my mindset at "lawnmower"). Now that idea makes more sense to me. My thought is this little coaxial helicopter could shed at least 25 pounds if it likewise adopted a pull-start piston engine.
*Для россиян - поскольку этот пепелац весит более 115кг., то для полётов на нём в России нужны ВСЕ бумаги.* Сумма всех бумаг скорее всего будет более лимона и это только за первый год! Потом ежегодно будете платить ещё тыщ 200 - 300 примерно за техосмотр, налог и страховку. И да, нужно будет проходить ВЛЭК, а там даже относительно здоровых зарубают. Берите аппараты весом менее 115кг. там вообще ничего из бумаг не нужно! Даже пилотское. И налога нету.
Очередная замечательная китайская игрушка для больших мальчиков ! Похоже попытка ребят из Роторфлай заинтересовать китайского инвестора таки дала результат , но не тот , который ожидали парни из Кумертау . В итоге подарили колонку соосных винтов и вот результат . И хотя она запатентована , ну так для ушлых и чертовски предприимчевых китайцев это не проблема . А талантливому иженеру порой достаточно просто взглянуть на схему представленного механизма , как тут же приходит решение проблемы , над которой бился долгое время .
FINALLY, an honest video, without trying to conceal the noise with stupid music - THANKS. What's the rotor diameter on that thing? What's the brand and make of the helicopter?
Not a bad little bug, I like it. But the hull gives extra weight and fuel consumption. That's why it can take a smaller payload. Although flying to a friend's house on a nearby farm for a cup of coffee is not a bad option. However, with all due respect, I liked the smaller, lighter Micron Extra helicopter from Russia better czcams.com/video/BC9Z-DQNN_g/video.html
Thank you for not playing music but keeping the actual sound of the helicopter.
You're welcome.
Music for TV drama..
Totally agreed ! 👍
Я участник вашего канала из Ирана. Я преподаватель-пилот сверхлегких самолетов. Полет был очень красивым. Я бы тоже хотела полетать на вашем вертолёте ☺❤
Hola saludos mi sueño es construir un elicoptero ...
If I had one that's about the hight I'd ever fly in it 😁
Meu sonho é construir um também bela máquina.
Pocket homebuild heli with coaxial rotor - my lifelong dream!👍👍👍
OMG, I want one. More information please.
Красивый практичный вертолёт !
Ерунда какая то...Он даже этого субтильного китайца с трудом от земли оторвал.А грохота как у реактивного самолёта..
То такое...
I'm sure it's as reliable as a new chainsaw😀
Que belleza de Helicoptero ,
I like your shiny white floor in the hangar.
Superb!
that was the best part!
Absolutely! Reminds me of my ex wife!
Fantastico es plegable y compacto !
So beautiful, I really wish to own one
Снаружи прям конфетка, но когда камера заглядывает внутрь, то восторг убавляется.
И обрамление приборного щитка и клей по периметру остекления кабины, выглядят по колхозному.
Стоп-кадр нажмите ...
Но всё-равно лайк и уважуха этому самодельщику!
The prettiest copter Ive ever seen.
Interesting video, and even more interesting comments. How about that hangar though? It's immaculate! You could eat off of that floor. Other than the impeccable housekeeping of the hangar, the main thing that struck me is this tiny copter having an electric starter. I am thinking about the extra weight for the starter motor, engagement mechanism, and battery.
I viewed another video recently about a small, single-seat helicopter powered by an approximately 50 horsepower piston engine, and that had a pull-start. At the time of originally viewing that video, I thought it a little dicey to fly a helicopter with a pull-start engine (it put my mindset at "lawnmower"). Now that idea makes more sense to me. My thought is this little coaxial helicopter could shed at least 25 pounds if it likewise adopted a pull-start piston engine.
But what are we, savages?
If you get an engine out in flight i bet you'd like to have the electric starter
*Для россиян - поскольку этот пепелац весит более 115кг., то для полётов на нём в России нужны ВСЕ бумаги.*
Сумма всех бумаг скорее всего будет более лимона и это только за первый год! Потом ежегодно будете платить ещё тыщ 200 - 300 примерно за техосмотр, налог и страховку. И да, нужно будет проходить ВЛЭК, а там даже относительно здоровых зарубают. Берите аппараты весом менее 115кг. там вообще ничего из бумаг не нужно! Даже пилотское. И налога нету.
и аппаратов тоже нету. только если елизарова
@@GROP300 аппаратов море!!!
Love this! 🙂
HERMOSISIMO
CUANDO ME JUBILE ME GUSTARIA TENER UNO IGUAL PARA PASEAR POR MI QUERIDA ARGENTINA
Now that i like it reminds me of the gi joe helicopter a bit. Really cool👍👍👍
Nice deisgn helicopter
Its so cute!
Excelente, saludos desde Argentina.
Очередная замечательная китайская игрушка для больших мальчиков ! Похоже попытка ребят из Роторфлай заинтересовать китайского инвестора таки дала результат , но не тот , который ожидали парни из Кумертау . В итоге подарили колонку соосных винтов и вот результат . И хотя она запатентована , ну так для ушлых и чертовски предприимчевых китайцев это не проблема . А талантливому иженеру порой достаточно просто взглянуть на схему представленного механизма , как тут же приходит решение проблемы , над которой бился долгое время .
That's a nice looking machine..rotor blades are so short...what kind is it and how much...niceeee.
It's co-ax, so it doesn't need huge rotor length
Nice helicopter
I have one at home but it's a toy 😁, Syma S107G..the two propellers interlock so the body doesn't spin..very efficient
FINALLY, an honest video, without trying to conceal the noise with stupid music - THANKS.
What's the rotor diameter on that thing?
What's the brand and make of the helicopter?
This looks incredibly light and effecient
บ้านคุณนี้เสรีดีจัง เด็กก็หัดขับเครื่องบินได้ เมืองไทย ถ้าอยากเป็นนักบินต้องมีทุนไม่ต่ำกว่าสิบล้านบาท
Прелесть!
Looks like some sword fight on top of the chopper 😃
Stylish flying coffins! Love it!
I'm sold So Cool!
Gostei. Muito interesante
Real Nice !!! 👍🏻👍🏻👍🏻👍🏻👍🏻
Very nice👍
Hurry quickly.... To the petercopter! Hehehehehehehehehehehehehe....
Sound like my Trex 600 spooling up...
So Cool
Amazing
Good video
I'd really like to see these coax helicopters make an actual flight cross country. Or are they purely for a backyard, on a windless day?
Cartoon helicopter :)
IT'S THE Peter-Copter!
G8 design .
Just do detailed faitigue calculations for esp top rotor shaft "rotary vibrations" induced stress cycles
flying to nowhere, such demonstration is not enough for the hunger.
很厲害
Stabil dan tenang 👍🙏
Be good if someone made a rendition of this helicopter in MSFS since now it has helicopters..
Neat 😁✅😁
cool
Amazing, How mucho does It cost (selling price)?
I want this !
Like Airhogs but real life.
cool bro
👏👏👏👏👏👏👏👏
The Jetsons are officially here!
"COOL !!!"
Хороший соосный вертолет, но Камов делает лучше. Молодцы.
👍
Genial
Now days everyone have bike or car but in the future. Everyone will have this kind of helicopter.
#jetsons
Can’t wait until electrified version comes out, the lawn mower sound really screw the coaxial novelty big time
Fantástico
Not a bad little bug, I like it.
But the hull gives extra weight and fuel consumption. That's why it can take a smaller payload.
Although flying to a friend's house on a nearby farm for a cup of coffee is not a bad option.
However, with all due respect, I liked the smaller, lighter Micron Extra helicopter from Russia better
czcams.com/video/BC9Z-DQNN_g/video.html
What model or company makes this, and is it considered an ultralight?? Thanks!!!
You make your rotors?
KAMOV Style.
😉🇷🇺👍
Pitcher's mound to home plate!
Заметил очень высокие обороты мотора .
Классная птичка. Сколько она стоит?
Not bad. This is like a 1909-1910 version of a biplane, which scored significant success along it's follow-on development path. 🏊🔛
YOU GOT ANYTHING QUIETER!? AHAHAHA AHAHAHA LOL
Соосная схема как у вертолетов Камова
The flying coffin!
Liege ich richtig in der Annahme, das dies der neue Heli für den Sandmann ist?
Giving off mad super villain vibes lol
😎
Prezzo,cazzhhooooo !!
How much does it cost?
Maravilhoso essa aeronave quro uma coomo faz
Vou comprar um desses para eu ir la na minha casa no interior
Keren
Nice heli,how about price of unit
👍👍👍
Ideal para ir al trabajo y evitar los tapones .
Клёвый 👍 - пипилац!
Quro um como faz lindos nossa voar com ele deve ser o máximos
I guess that this chopper is easier to fly than a single rotor
There's carnival rides that go higher than that
Where can I get one?
Far out!
How much is this and where does it have some webpage?
How much the kit cost?
🤔If the wind pick up is it still safe to fly.
Детеныш Ка52)))
Its rotor clutches?
Ese lente me gusta q precio gracias
1. What is the weight limit?. 2. What is the flight duration time?
가방정도 넣을 트렁크정도는 하나. 만들어주지 ㅜㅜ