6 MINUTES TUTORIAL REPAIR BACK TIRE PUNCTURE XIAOMI M365 Mijia Scooter Wheel fix
Vložit
- čas přidán 25. 08. 2024
- 6 Minutes tutorial to repair tire puncture on xiaomi mijia m365 electric scooter.
This is first tire puncture (pierced with glass) on xiaomi scooter millage is 577miles / 929km.
IMPORTANT ADVICE:
Keep pressure around 57psi/3.9bar/3.8atmosphere in both tires to avoid puncture in future and Check pressure every week.
And you no need solid tires, solid tires has very bad amortization and add weight.
I thought I was a man, and then came the day that I had to change a tyre on the Xiaomi M365.
If you can change a car tyre then you're a man don't worry this doesn't count.
i hear you brotha! every man should change a tire at least once in his life... dang! i just did! feeling alpha again!!!!!!!!! :)
When The Beat Drops 😂😅🤣
lol
czcams.com/video/bufVKb5aClU/video.html
you made this look so easy I just spent 2 hours fixing my cousins puncture😂 never again I tell you lol
Dale H so so, little practice and you become pro, don’t try put big part of tire in rim, just little steps. But anyway try this method czcams.com/video/n2O4aG3IKTw/video.html
It’s to easy and it’s works well, now I do it only this way
Is it hard then
As everybody saying in the comments, putting the tire back in the rim takes out the fun of any living being. However, the video was extremely helpful so I thank you from the bottom of my heart.
Your videos have very professional production, and are clear and concise!
They remind me of IKEA’s instructional videos a little. :)
The best tutorial I've seen so far for dis/assembly for the mi scooter.
Thank you.
I broke 4 bike repair kits. Those tires are nightmare. I am planning to burn my scooter tonight.
Same for me, I hate my fucking e scooter now
This tyre change makes me want to throw this fucking scooter through the window of my mate who gave me this piece of shit.
Bye a tubeless tyre
Video skips the hardest part
which part is the hardest part? he find it very easily to unscrem the rear tire, while I can't even do it. Did you experience the same thing??
Yes you right he skips the hardest part
What hardest part
czcams.com/video/bufVKb5aClU/video.html
I'm laughing at everyne having a hard time putting on the tyre. Try some road bike tyres, you'll end up punching a wall :D.
Tip: Get the tyre and place half on and cable tie that part, then work your way around and cable tie that part and finally put the rest of the tyre on.
I used to change the tyres on my bmx when I was a kid. Maybe they're easier.
Thanks for your tip. I did the same thing and it worked.
Thumbs up for visibility big lad
No lies, it was extremely hard... Tho used 2 forks instead of plastic levers.
p.s. scratched the whole wheel...
same :c
Much much much easier way czcams.com/video/n2O4aG3IKTw/video.html
No bullshit talking 30 minutes video. You are amazing! Thank you.
Jakub Adamus Thanks, Watch this czcams.com/video/n2O4aG3IKTw/video.html
That’s easiest way, pass one year I forgot about levelers and other sh..
Dude how did you put that tire back on? I've tried every tool imaginable, it's extremely tight!
same issue here can't put it back on spent over an hour trying...
PeckoBre an hour? I spent like 5 hours and took it to a local bike shop. The guy said good luck, it looks like a nightmare...
KetoMyHeart Not sure if I wanna laugh or cry. I will give it another try after work and then taking it to the bike shop until they fix it.
I watched another video of a polish guy strugle with it, but he succeeded in about 8mins...
And what's funny this was my 2nd day on scooter lol.
PeckoBre Good luck, they sell a solid wheel, which needs no inner tube, I might buy that instead.
KetoMyHeart maybe I saw mounting video for solid one guy had to microwave it and use lube to put it on.
My lever came loose and I thought it was broken. This fixed it and the handlebar movement! Thanks!
thanks for watching
Two little advices for those who can’t put a tire back:
1. Don’t use any plastic levers, only metal ones (or anything you have around, kitchen ladle should be good enough)
2. Try to warm the last section of tire with a blow dryer till the rubber became really soft. It’s still a pain in the neck to put it back, but it should be a bit easier to do.
Good luck guys!
Ok. but one trick and you no need dryer or metal levers and make put tire back easily, just little practice, The rim has a deep groove in middle. Just squeeze tire and put opposite side in this groove, when you put tire edge in rim groove than you can easily put tire on other side.
@@dmitriypushkarev6840 Hhhm.., didn't think about it. Will try that technique next time. Спасибо :)
Plastic levers worked just fine for me. Using lubrication helped a lot.
I knew that but still I struggled hard. I learned another thing hard way. NEVER start from the nipple side. Start from the opposite side, and leave the nipple side for the end. It took me several times to realise that inner tube nipple prevents the outer tire to slip into the deep groove.
@@IguanaMGT Thanks, this tip was crucial. I managed to put the tire back on the rim in just 5 minutes.
My rear puncture was from not being inflated enough, the whole side tube showed signs of wear from rubbing internally but the hole was just a small pinprick on the side of the tube 90 degrees away from the ground. I used a normal repair, did the glue once held the patch tight and then the SH1T hit the fan, I had not seen any videos or studied how to do it and it took me literally hours of frigging around and constant sobbing just to get the Tyre back on the rim, then it would pop off the other side and I would have to start again, it was so tight. Then I realised fuck this tyre rim seal is like a car and like cars they use special equipment. You really need Motorcycle Tyre levers, you need to powder the inside so the tube does not get twisted and pinched, you need to use soapy water on the edge of the tyre so it slips better. Took it for a test run and it ran flat. Did it again, many layers of tyre glue, much pressure on bigger patch and waited 24 hours to dry. Put it back together and it went 100 yards on the test run, flat again. Just purchased some solid tyres, not going to stuff around with these again, cannot afford to have flat on way to work and back.
to replace the rear tire I placed the bottom of the tire in a small vice and used two clamps to sqeeze the two sides in, then levered the top half with spoons, literally took me less that 5 mins. wish youtube let me post a pic.
6 minutes tutorial and 2 hour of work. I did yesterday - a real nightmare to take off this stupid tire.
I actually did it! Not gonna lie, this was hard as fuck. But some brute strength and strategic positioning of the levers did the trick. Best of luck!
Thanks for making this video. Regards from Croatia!
Thanks for watching, please watch this is a lot time saver tutorial, I already forgot about how to fix the wheel czcams.com/video/n2O4aG3IKTw/video.html
How I got the stupid tire back on without heat.
You will need a butter knife that will get bent.
Some string you are going to cut.
Once you have the tire and tube on the rim you will string string around the tire and tube to compress it.
Pinch the tire together at tight as possible when tying the knot to keep it pinched. You can pinch it with your foot against the floor as you tie it or have someone help you. Do This in 2 or 3 places. It makes the tire much easier to slip on. You could also do this with C-clamps....
You are gonna work the tire in from the bottom. 1/2 by 1/2 using your butter knife you are going to pull the tire into the rim. As you do this rotate the tire and push it down into the ground this will give you more tire and space to slip the tire over the rim. When about half of the tire is in the rim you will need to use more force on the butter knife and it might bend but the shape of the bend actually makes it work better.
Keep working your way 1/2 in by 1/2 and it will fall in. It is seems impossible cause the tire won't stretch... then make some room by pressing the tire into the ground or having some pinch the tire for you.
Good luck!
holy shit how you put the damn thing back so easy wtf ?
plastic ? i used the hardest metal and i bended all the tools XD
Took me only 4h so its easy compare to the front tyre took me 2 days and the help of a friend to put it back i needed more hands for that one .
Heating up the tyre helps a lot
Hi there, Can i use this video in my website? of course through URI link
Absolutely, any use for any purpose
Thank you so much, but could you please tell me the Hexagonal bolts size to unscrew plastic shied. I have a set of hexagonal bolts but the size is like between the two size....
you're using chinese hexagonal keyes go for the real thing and order from FACOM
2,5mm
good tutorial. thanks for making the effort
ggss11 Thanks a lot! I upload soon tutorial how to fix backlash without gaskets on m365
do this! Boil the tire for 10 mins. Especially if its new! (Not the innertube) lube everything with some oil. For the hard part getting it on! I use zipties to hold the parts that are on on both sides! Like 4-6 zipties. And 2 spoons i get it on in 2 minutes this way! If You have a vise You can do this very easy just pinch tire with the vise and zip tie and move position pinch ziptie last part use a spoon!
where did u get the repair patch ?
Common bike shop
I managed to take out and put back tires after 3-4 hours of hard work. The trick is put the oil on the rim and side of the tires.
amazing
Need to do mine it's bin in the cupboard for a month now 😂
Save some money.
Use any oil as lube
Use strong metal thick spoons as levers
Use ziplock ties to keep the wheel in place as you work around the whole wheel.
Got it fully on in less than 15 minutes
Advice as been given below. Lots of Olive Oil!!! When trying to put the tyre back on, use lots of oil, foot on the wheel and use the bike tool to apply pressure all the way round the tyre in one continous motion
great tips! thank you
FABULOUS!! Thanks
Changed the rear tyre today, what an absolute balls ache, christ, you need the strength of Odin, Thor and Loki to put the bloody tyre back on the rim!! I would suggest using cable ties to assist in helping keep the tyre on as you bead it around the rim, otherwise it just keeps popping off. Oh and i've learned from a mistake avoid getting certain run flat tyres from AliExpress theyre totally tonk. and are advertised as 8.5 X 2 but are way too small to even contemplate putting on the rim!...Rant Over, where's my beer....Grrrrrr.
I got New tires but they are wider.. Try 6 h to get this shut back on. If I lay both wheels on the ground the new one is higher about 1cm. Tried all Tipps even microwave. For the first I Try original wheel back on.
I sonder how people from gearbest got this to work. Same wide
Watch this czcams.com/video/n2O4aG3IKTw/video.html and your never need to dissassemble wheels, I use this method last year without levellers or glue
Fantastic video. Thanks.
exellent video! tehank you very much!
Thanks for video! I was wondering what was that strange sand paper, I haven't patched tyre for 20 years... I think it's also good to put talkum powder between tyre and tube. I ordered also tyre liner (anti puncture tape), I don't know if it is effective yet.
ajovev hi, I think it not effective, because cord from tyre damage tube in 95% of cases. Self distraction) just keep higher level of recommended pressure in tyre is around 50psi. And put in tube 30 ml
of mtb anti puncture sealant, I use continental revo sealant. It works very well, just watch video about that on my channel czcams.com/video/n2O4aG3IKTw/video.html
@@dmitriypushkarev6840 I have my 1st scooter, m365pro from 2 weeks, yes, I check pressure every week and keep 50psi front and 55back (I'm 90kg), check it with gauge after pumping. I will see your video, thanks.
Damn.. I had for the front wheel last week.. (Because some glass as well ) and now dhe back one.. this will be my first ,,alone change,,
I don't know why people not see this tutorial, but it much more easer czcams.com/video/n2O4aG3IKTw/video.html
Plastic levers does the job fine. What it takes is simply a lot of arm grease, your knees, lubrication, and 3 hours. Seriously just bring it in to a shop and let them do it for you.
True
In Germany you cant find any Shops Which would do that for you... They send you away anderen wish you good luck. ITS a Nightmare
@@BigBuddha93 "Sorry we only do bicycle here, no scooter. Good luck."
It's as nightmare to change the front tire.
EASIEST Method:- Use cable ties as every other method will cause grief. Went on quickly and used 5 ties, could do it with 4.
Бро, отличное видео! Подскажи, Какое давление лучше поддерживать в камерах на сяокате с латкой / без ? Вес райдера 70кг
Dimitri Ishchuk я когда заклеивал, такое же давление держал 55psi, а вообще лучше посмотреть это видео и не париться больше с латками и другой фигнёй czcams.com/video/n2O4aG3IKTw/video.html можно прям в заклеенное заливать, пока проблем не обнаружил, катаюсь почти год совершенно без проблем с колёсами
Use cable ties each section you insert makes it much easier
you no need all that czcams.com/video/n2O4aG3IKTw/video.html
Thanks very nice.
Thanks, I found way to forgot about puncture for ever czcams.com/video/n2O4aG3IKTw/video.html
Thank you
Are you welcome, but now I recommended other method, much easier and better czcams.com/video/n2O4aG3IKTw/video.html
Can I do that without taking the wheel off the scooter?
Yes. Watch this czcams.com/video/n2O4aG3IKTw/video.html
First time doing it and it took me 10 mins 😂 fml my fingers tho... ouchh
Yes - he forgot to check tyre for what caused the original puncture ! A small thoRn perhaps? Big mistake ! Often a very small(1-2mm) point of a THORN is still stuck embedded in the rubber outer tyre - you must feel and look closely around the inside of the tyre for anything sharp that is still there. At least with a scooter there is much less tyre area and length to examine than with a bicycle !
Paul G
Yes, I forgot)
This entire process was assassinate ... And I used to work labor intensive jobs!
You can use easy way to solve this czcams.com/video/n2O4aG3IKTw/video.html
Would it be possible to run it tubeless with some sealant, like they do for mountain biking?
Now i think is good idea
if you want to do that you might as well try the solid tires that they sell now and some are drilled out also to lighten it up also. i'm running the solid tire. only issue i had was with the vibration knocking the battery tabs loose but I found i can fix that faster than fixing the flats! and once you give it a solid solder it doesn't come off again. but you can't prebreak those tabs they are on TIGHT.
have you had any additional issues since fitting the no air tyres in place of the pneumatic ones? and which no air tyres did you buy?
I cant return tire back...
These solid tires are bumpy as hell though, I just use fix a flat on mine
What kind the tools to open it
Thieu Ly you no need repairing tools, watch this video it’s working easy way to fix it czcams.com/video/n2O4aG3IKTw/video.html
What kind of screwdriver is need for unscrewing those hexagonal bolts ? Tool given by xiaomi doesnt fit :C
This is H2.5 screwdriver is same screwdriver for unscrew bottom guard.
The hex bolt for the plastic covers are smaller than usual, I used a toolkit for PC-repair that had the correct size.
hey, can I know wich pump are you using?
G M hi this is BETO bike pump i dont know model. But i plug native xiaomi hose
Every time I tried to use metal pry spoons ..it punctured the inner tube.
Matt try this method czcams.com/video/n2O4aG3IKTw/video.html
xiaomi scooter m365 pro tire pump Air meter
Font tire pump meter
Back Tire pump meter
No matter how much palm I use
I'm buying new ones but I don't know
Font tire pump
Back Tire pump
Please answer me
Can anyone help my rear tire is flat and the bolt is damaged I can’t remove it any idea please?
Racer Racer can you send photo of bolt? always.on.positive@gmail.com
please don't rub your finger in the glue IT will contaminate the glue and make......
Bullshit! I can't even mount back the tire in! After spending bloody $10 looking for 2.5 screwdriver 😑
is there a lateral 1.5-2mm play in your back wheel? All my Xioami scooters have this issue. You can feel it as you move the scooter sideway. Dear China: why do you keep making crap products?????
Assemble the wheel with plastic levers then... Abracadabra 😭
So, sorry but it not my native language. Но по русски ты вообще бы нихуя не понял
The Allen screw is way too tight I swear I’m about to blow my scooter up
take it to local garage or bike repair shop. job done
That's a giant waste of money, it isn't that hard to do at home
How the fck did you get the tire on so easily?
how tire pressure help to avoid punctures?
Right pressure not helpful to avoid typical for bike tire punctures (punctures by shards of glass, nails and etc), but it helpful to avoid typical problem for m365 - friction holes on wheel tube
Dmitriy Pushkarev ok thanks.. Btw how u can add more air in front tyre? it seems to be tight fit.
I just share my expirience of using m365 scooter, and i never had troubles with scuffed tubes, many people have this problem. I just keep same pressure on both tires on both scooters, without problems.
Solid tyres....
Maybe but it was drain battery very fast and how about amortisation?
I recommended solder battery before you make it
I've been stuck on the last step with the plastic levers for hours, any other tips for that part? Every time I get one side in the opposite side pops out I'm about to lose my shit
try put half of tire on rim with hands, for other half of tire use levers. Be careful with brake disk don't bend it.
just spend 5 hours on getting the tire back on when i got to the pump the inner tire was punctured somehow on the repair:( fck my life
i took faking 6hrs of trying and i did not manage to put taht F4387er inside!!!
ask for help from someone nearby
A more indepth video on a xiaomi tyre change here czcams.com/video/vIMJ1zbM-6Q/video.html
omg these hex screws are terrible quality, made from finest chinesium. had mine stripped only by looking at them. Lucky me it was easy to grind a slot in them like as they were butter
Can't even get the fucking red stripe thing out any tips?
Use needle to pick off
But just watch video czcams.com/video/n2O4aG3IKTw/video.html then no need to remove red strip
"Plastic plug"? its more of a sticker. Xiaomi shpuld be ashamed of such stupid solution. You have to scratch it off almost to change the tube. ridicolous.
Well then, I’m fucked.
Bullshit!!! We cant put the tire on wheell
Einfach Silikon rein für Fahrräder
you put the tire wrong way hahaha (colocaste la llanta mal, el sentido de las marcas en las rueda apuntan hacia el lado contrario)
No, you wrong, protector in right direction, break at left side
That doesn't look so hard! I've done plenty of bicycle and motorcycle flat repairs and tire replacements. I was wondering why one couldn't just use bicycle tire irons.
it is hard i just spent 3 hours replacing the front tube. thinking of selling it just for this stupid design
Can't do this... the tire refuses to go back on the rim, keeps just getting pushed out the other side. Bike shops won't touch this either. Is there anyone who can repair this for me? I'll send you the tire, rim, and tube and you do it. Please make an offer. I've tried and failed multiple times.
Tip..Use Vaseline or grease around the tire rim and the wheel, also use spoon handles as levers and if you need to use releasable 295mm cable ties so that the sections you have put back on do not slip off. I have become a bit of an expert doing it now.
skeelo69 I found a bike shop who patched and fixed the wheel for me for 20.00. I was happy to pay it and get back on the road. He told me those wheels are extremely difficult to put back together and required special tools in his shop. thanks for the tip.
He said that to you so that you paid him the $20 , next time do it yourself and save yourself the $ and inconvenience of going to a bike shop.
@@jimbarrofficial What bike shop?
@@AlexDjalo Somervelo in Union Sq Somerville, MA. Well worth the money.
O can't even to take it off :((
Radexw try this czcams.com/video/n2O4aG3IKTw/video.html
I will resell my stupid m365 for 150euros. Idiot system .i cant put back the tire
why no one watches this video first? czcams.com/video/n2O4aG3IKTw/video.html
Fake, do it live
It's a waste of time when You repair. New one costs some $5 and repired one will die sooner then new one.
cheater, you didnt show the hard part getting first edge over rim.
Yes, is my mistake, just watch this video maybe then you no need to do that
czcams.com/video/n2O4aG3IKTw/video.html